FFP Checklist Scan Thors (UK) Limited 35a Keighley Road Silsden, West Yorks, BD2 0EB Tel: 01535 656002 Fax: 01535 654825 Date set up: 16.05.2012 Docum...
5 downloads
10 Views
5MB Size
Scan Thors (UK) Limited 35a Keighley Road Silsden, West Yorks, BD2 0EB Tel: 01535 656002 Fax: 01535 654825
FFP Checklist
FREE FOR PRODUCTION - Next Finsbury loose cover Date set up: 16.05.2012 Subject to your approval of the information in the attached documents, this model will be cleared for Pre-Production Document Specification Details Images Fabric FR approved Fabric Performance approved Care Information & Labels
Yes Yes Received Received Yes
Additional comments / Amendments made 16.05.2012 - version 1 sent to HA for approval
16/05/2012
Next Finsbury loose cover
MODEL:
Finsbury
CUSTOMER:
Next
PHOTO:
OVERALL DIMENSIONS(CMS) DIMENSION SKETCH
Corner HB (LHF & RHF)
Width 265
Depth 197
Height 90
PART 1 (2 seats one arm)
172
91
90
PART2 (corner section, one seat, one arm)
91
197
90
4str HB (extra lrg) 3str HB (lrg) 2str HB (Med) Snuggler Chair
226 194 174 117
91 91 91 91
90 90 90 90
NUMBER OF CUSHIONS Formal Back Corner
5
Seat 4
Arm
Scatter
n/a
4 - 2 x scatters are stripe
one side, plain reverse, 2 are plain allover 4str 3str 2str Snuggler Chair
2 2 2 1
2 2 2 1
n/a n/a n/a n/a
2 2 2 1
FABRICS A
Name Tivoli Plain
A A
Tivoli Stripe Amalfi NON FR
Colour’s Natural Mushroom Natural Grey, Mink, Pistachio, Stone & Teal
Composition 55% Viscose & 45% Linen
Care Label No Attached
55% Viscose & 45% Linen 58% viscose, 17% cotton, 15% linen, 10% polyester
Attached Attached
Pieces available in :Tivola plain all over Tivola stripe all over Tivola combination – plain with stripe fabric scatters both sides.
FABRIC COVERAGE
A B
Front X
Carcass Back/Side X
Seat Cushion Top Underside X X
X
Formal Back Cushion Front Reverse X
X X – combination only
C
GENERAL INFORMATION Carcass Springing Seat Cushions Back Cushions
Scatter Front
E1 chipboard and solid wood frame 3.8mmdia Zig Zag 100% Polyester Fibre filling 100% Polyester Fibre filling.
Reverse X
Back Panel Loose Cover Model Feet Care leaflet Other Details
Packaging
Labels
Extra
Pre shrunk slotted hardboard to prevent “booming” noise
Fitted with Schedule 3 Interliner ** NON FR FABRIC TO BE USED***
Fabric still to be FC finish (stain- resistant coating) Not Visible but black plastic guidelines - Same as Antoinette Loose cover version • Please use special ‘French Seam’ detail all over rather than usual ‘round’ piping • Swatch of fabric same size as the above label to be sewn into the seat platform on one edge only • Image in directory indicate left and right option • Please increase depth of the strip of fabric at the front of the seat platform by 6cm to ensure the labels are set further back and that the interliner is not visible when seat cushions are in place. • Formal backs when pulled into place around the shape of the arm this leaves a gap between the two back cushions in the middle – please can this be reviewed and either the shaping amended for a better fit around the arms or the overall width of each back cushion increased slightly to avoid the issue. • Please take extra care on front skirt centre seam as this is quite puckered • Please look into linking brackets currently they are difficult to connect – A pictorial instruction to be included with corner groups to show how linking brackets work – similar to the one on the stratus • Seat cushion edge should hang no more than 5cm over the edge • For transit, skirt to be smoothed down and taped in place • Extra packaging around feet for protection whilst in transit • Next ‘fibre fill’ seat cushion information leaflet to be used • Next care label to be used • Barcode labels to be added to the product and to outer packs • Next Specific labels to be added to the outer packaging • Permanent care label to be stitched into the seat platform (removable cover, dry clean version for Tivoli/ Linetta fabric) • Next logo label to be stitched into back outer corner of all pieces (as indicated in photos attached) • Fire labels must be included on both parts of the corner group as well as the relevant loose cover fire swing ticket by kimble • Loose cover fire label must be used on the products • Amended seat and back cushion panel sizes – as per communications
between Helen & Alicja
NEXT Finsbury Corner
RHF (right hand facing) corner
LHF (left hand facing) corner
Care Label Information
Model – Next Finsbury Loose Cover “Dry Clean Only “ Fabric’s – Amalfi Or Tivoli Fibre Composition for Amalfi - 58% viscose, 17% cotton, 15% linen, 10% polyester Fibre Composition for Tivoli - 55% Viscose & 45% Linen Clean regularly using the soft brush attachment on your vacuum cleaner. Small stains may be removed by dabbing with a moist clean cloth. Should this be ineffective, or you need to remove a larger stain, please use a Specialist Cleaning Company. Fabrics that have a pile, such as chenille and bouclé, may shade, show pressure marks and flatten. Cushions should be plumped regularly to maintain their appearance. (See care booklet for more information)
Our cushions are designed, quite deliberately, for a casual, much ‘lived-in’ appearance. You will notice that within the first couple of days of use in your home, the cushions of your furniture will ‘flatten down’. This is quite normal and after a short time your furniture will have that luxurious ‘lived in’ appearance that can only be achieved with rolled fibre interiors. We recommend that you regularly ‘plump up’ the cushions and rotate them where possible to allow for even wear. When your new sofa arrives, you may notice that some of the cushions may have been creased a little out of shape in transit. This can be simply corrected by gently patting the cushions back into shape to redistribute the filling and reshape the cover. We hope you enjoy your new furniture.
Specification Sheet Product Reference: UPHOL8
Description: Dry Clean Loose Cover Upholstery Department: Home
K
PROFESSIONAL DRY CLEAN ONLY
Clean covers inside out
SPECIFICATION Process
Finish
Substrate
Dimensions
Scale
Printed
Sonic Cut - Must be Ultra Sonic to avoid fraying
White polyester satin ribbon
202 x 130mm (includes 12.5mm sewin)
85%
Colours
Black
NEXT BUYER This is not an accurate colour representation Please check this layout thoroughly as no responsibility can be taken for mistakes once you have approved this artwork. Please keep one copy for your reference - and forward copy to your manufacturer for them to place orders direct.
Additional Comments: Meets essential requirements? Yes Approved by:
No Date:
Issue Date 10/03/10
GUIDANCE FOR SPECIFIC TYPES OF STAINS AND SPILLAGES Wine and other alcohol, soft drinks, tea, coffee and other aqueous liquids
Blot using a clean absorbent cloth. Rinse out remaining liquid with warm, not hot water, do not soak. Follow 'Water based stains' if necessary.
UPHOLSTERY CARE ADVICE
Salad dressings, cooking oils, butter, margarine, and cream.
Carefully lift off with spatula. Blot with clean cloth, do not rub. Follow 'Oil based stains' and then follow 'Water based stains'
Thank you for choosing your upholstery from Next. Next Home has created an exclusive collection of modern and classic upholstery. This leaflet is designed to help you prolong the life of your new sofa collection. Please read this leaflet and keep it for future reference.
Solid foods, mud, soot and other solids
Lift off with spatula and vacuum when dry. Follow instructions for 'Water based stains' if necessary.
Candle wax
Remove surface wax with a spatula then follow instructions under oil based stains.
Fruit and berry stains, fountain pen ink, emulsion paint, blood, egg
Follow instructions under 'Water based stains' BUT ensure only cold water is used (Hot water will fix the stain).
Paint (oil based)
Remove as much as possible with a spatula and blot with clean cloth. remove remaining paint with turpentine substitute (white spirit) until clean; follow instructions under 'Water based stains'.
Upon delivery please inspect your upholstery thoroughly; confirm your approval by signing the delivery note. If for any reason you are unhappy with the product please indicate on the delivery note or return product immediately with carrier. Telephone our customer services department for further advice: Home Customer Services: 0800
032 3243
This does not affect your statutory rights
Vomit and urine
Remove as much as possible using a clean cloth then follow as 'Water based stains'.
Shoe polish, grease, fat, motor oil
See 'Oil based stains'
Other polishes, rust, tar
Contact a professional cleaning company such as ServiceMaster 0800 626303
FRAMES All Next upholstery frames are constructed of wood taken from non-endangered sources or plantations. Hardwood is used on load bearing areas and complementary materials are used to create each distinctive design. All frames comply with BS4875 and BS EN 1022 for strength and stability.
FABRICS AND FILLINGS All covers and fillings comply with the Furniture and Furnishings (Fire) (Safety) Regulations 1988 (as amended). All fabrics comply with appropriate British and European Standards. Selected Next upholstery is treated with a soil and stain resistant treatment. Next Upholstery is designed and made for domestic use only.
Next Retail Ltd., Enderby, Leicester, LE19 4AT
HOW TO DRESS LOOSE COVERS In order to maintain a tidy appearance during use and after cleaning your loose covers will require regular-adjustment (re-dressing). Simply follow the steps below. Step 1: Remove the seat and back cushions. Find the two top back corners of your loose cover and standing behind your sofa, place these over the top back corners of the sofa. Step 2: Gently pull the arms of the cover down each arm in turn. Step 3: Insert valence rods (where applicable). Loosely pull the cover over the front of the seat platform. Step 4: Starting at the top of the back of the sofa ensure the seam in the cover runs along the outside back edge of the sofa back and gently smooth the inside back down to the seat platform. Step 5: Ensure the arms are fitted squarely with the seams following the edges of the arms. Step 6: Neaten the cover ensuring it is securely attached to the Velcro (where fitted) under the arms and the back of the frame to minimise any movement of the cover during use. Fasten zips and tighten ties (where applicable), this will help to improve the fit around the frame. Step 7: Gently smooth the cover over the seat area, tucking excess fabric in around the seat platform and from the top back and inside edges of arms tuck excess fabric into the recess provided. Step 8: Re-fit the valence rods (where applicable). Step 9: Ensure cushion cover seams are in line with cushion edges and fibre filled cushions are well plumped, replace cushions as necessary.
CLEANING AND CARING FOR YOUR UPHOLSTERY REGULAR CLEANING Vacuum clean your upholstery at least once a week on a low setting, the removal of dust may be improved by pre-brushing with a soft brush. Accumulated dirt will accelerate wear and tear. CARE OF CUSHIONS Reversible cushions should be turned regularly; switching positions where possible as this will reduce soiling and promote even wear. Plump back and seat cushions daily. PROLONGED SUNLIGHT It is not advisable to expose upholstery to direct sunlight for prolonged periods as this may result in the fabric fading. Protect your upholstery by drawing your curtains or blinds. GENERAL USAGE Your suite is designed to be sat on in comfort. In order to maintain the appearance and shape of your sofa avoid sitting on the arms or back. Take care not to snag fabric with sharp edged toys, buckles, jewellery or by allowing pets to claw furniture to prevent permanent damage to your upholstery. For the removal of stains see the back page of this leaflet.
FIXED COVERS We recommend that your fixed cover sofa is professionally cleaned only according to the sew in label. Service Master (Freephone 0800 626303), provides a Nationwide cleaning service in your home. (The use of ServiceMaster is independent of Next and therefore we regret that no liability will be accepted arising from their use). Cushion covers should only be cleaned in situ according to the sew in label. Zips on cushions are for ease of manufacture only. LOOSE COVERS Before washing or cleaning ensure that valence rods are removed and follow the instructions shown on the sewn in label. Do not soak, do not tumble dry, do not exceed 40°C and always use a ‘Colour’ washing powder (Optical brighteners will fade your fabric). Always clean your set of covers at the same time or in consecutive loads, wash covers inside out and iron whilst damp if permitted. Fit covers back onto the frame whilst slightly damp and tension the seams to fit.
CARING FOR FABRICS TREATED WITH SOIL AND STAIN RESIST TREATMENTS Clean up spills immediately. The longer spills are allowed to remain, the more difficult they are to remove. Use an absorbent cloth, facial tissue or sponge to blot up spots and spills. Be careful not to rub the stain deeper into the fabric. If the spill is solid or semi-solid (like butter or ketchup) remove the excess by gently lifting it off with a blunt knife or spatula. Often gentle blotting will remove all traces, but if the spillage mark cannot be removed completely, use the appropriate spot cleaning technique listed below. Note: Before using any stain removing agent it should be tested. The test should be carried out on a hidden area of the fabric to ensure that it is colourfast and will not damage the fabric. With velvet upholstery it is advisable to spot clean, wiping in the direction of the pile (so that the pile lays down). When the fabric is dry, brush gently, first against, then with the pile. Never try to remove stains with household detergents such as washing up liquid. WATER BASED STAINS Water based stains (including ketchup, soft drinks, wine and alcoholic beverages) should be removed using a good proprietary brand upholstery shampoo. Follow the manufacturers directions and do not exceed the recommended dilution rates. Use a new clean absorbent cloth, turn the cloth frequently to expose a clean surface, use a dabbing action rather than rubbing or scrubbing, use mixture sparingly, work from the outer edge of the stain towards its centre to prevent spreading. Always rinse out upholstery shampoo with warm (not hot) water. OIL BASED STAINS Oil based stains (including salad dressing, butter and greasy foods) should be cleaned with a spot remover containing dry cleaning fluid, which may be obtained from most supermarkets and hardware shops, follow the manufacturers instructions. Use a new clean absorbent cloth to apply the fluid, dab the stain from the outer edge towards the centre of the stain, do not rub or scrub as this will spread the spillage.