Tamiya Model Magazine Issue 240 2015-10

www.tamiyamodelmagazine.com

5

FULL

BUILDS

INSIDE THIS ISSUE

£4.20 October 2015 ISSUE 240

BNDIAGN ENMERGAY CDRINK

A

en MP4-12 C GT3 ar cL M 24 1: i’s jim Fu in Red Bull colours

STOPPING OFF FOR FUEL AT LEON'S! Two of Tamiya's new 1:35 Somua S35s stop off for fuel

Senna Ducati Panigale, Kittyhawk 1:32 T-6 Texan trainer, plus kits, books and accessories… p 01 Cover TMMI 240MN.indd 1

28/08/2015 16:43

D75020 Find us on facebook search Plastic Kits UK

p 02 Dragon 240.indd 8

Dragon Kits are distributed in the UK by The Hobby Company Limited, Knowlhill, Milton Keynes, MK5 8PG See the full Dragon range at www.hobbyco.net Dragon models are available from all good model shops

28/08/2015 16:25

STOPPING OFF FOR FUEL AT LEON’S! Tamiya’s new 1:35 Somua S35 stop off for fuel; diorama PAGE 30

Issue 240 October 2015 EDITOR Marcus Nicholls [email protected]

Contents 4 NEWS DESK New kit and model product news 6 NEW ARRIVALS A new section showing some of the new kits received at TMMI 16 SADDLE UP! Kittyhawk’s 1:32 North American T-6 Texan trainer 28 MOGAMI’S MANY FORMS Tamiya’s 1:700 IJN Mogami Light Cruiser, previewed AN ‘S’ FOR SENNA Tamiya’s 1:12 Ducati 1199, this time the very special Senna ‘S’ version PAGE 8

42 NEW RELEASES ACCESSORIES New and recently issued modelling accessories 46 DESERT MONSTER Kinetic’s 1:35 RG-31 Nyala Bantamweight class MRAP 54 MISTAKEN IDENTITY The WW2 US two-piece herringbone twill camouflage jungle suit was good camouflage in the Pacific theatre, but in Europe... 56 NEW RELEASES KITS New full kits, reviewed 60 BOOK REVIEWS New modelling-related titles reviewed 64 CONTACTS Where to buy the products used and reviewed in TMMI 66 THE EDITOR’S PAGE Shep Paine 1946-2015

BIG MAC WITH WINGS! Fujimi’s 1:24 McLaren MP4-12 C GT3 in Red Bull colours PAGE 22

Do you live outside the UK and want Tamiya Model Magazine delivered direct to your home, anywhere in the world? Just email us at; [email protected] Or call +44 (0)1525 222573, fax +44 (0)1525 222574 GMT Subscription rates for 1 year (12 issues) are: Within UK: £44, Europe: £56, Worldwide/USA: £69 ($106 US approx)

Join TMMI at facebook.com!

HOW H OW O WT TO OC CONTACT ONT TA AC CT TU US: S:

TELEPHONE: (UK) 01525 222573 FAX: (UK) 0 01525 222574 EDITORIAL EMAIL: [email protected] ALL OTHER ENQUIRIES: [email protected] ADDRESS: ADH Publishing,

Doolittle Mill, Doolittle Lane, Totternhoe, Bedfordshire, LU6 1QX, UK Tamiya Model Magazine is published monthly by ADH Publishing. Reproduction in part or whole of any text, photograph or illustration without written permission from the publisher is strictly prohibited. While due care is taken to ensure the contents of Tamiya Model Magazine is accurate, the publishers and printers cannot accept liability for errors or omissions.

TMMI 240 October 2015

p 03 Contents 240MN.indd 3

3

01/09/2015 17:37

Newsdesk

If you have news of forthcoming model, armour, aircraft or car events, changes of address or just interesting information to share, please write to: TMMI Newsdesk, ADH Publishing, Doolittle Mill, Doolittle Lane, Totternhoe, Bedfordshire, LU6 1QX, UK Tel: 01525 222573 Fax: 01525 222574 Email: [email protected]

IN BRIEF... BRACH brachmodel.it • 1:35 15cm-sFH13/1 auf Geschutzwagen Lorraine-S(f) • 1:35 DW2 with Pz.IV turret BRONCO hannants.co.uk • 1:35 WWII British Royal Marines Soldier Set A • 1:35 WWII British Royal Marines Soldier Set B • 1:35 Maschinengewehrwagen 36 horse-drawn MG • 1:35 US M1 57mm anti-tank gun (early) w/5 figures DRAGON hobbyco.net • 1:32 Messerschmitt Bf109E-4B • 1:700 USS Lake Erie EDUARD eduard.com creativemodels.co.uk • 1:35 T34-76 for ICM • 1:48 Hurricane Mk.I for Airfix • 1:350 USS Yorktown CV-5 crane and lifeboats for Merit Models • 1:350 USS Yorktown CV-5 superstructure for Merit Models • 1:72 C-54 Douglas Skymaster for Revell • 1:72 Beaufighter Mk.X for Airfix • 1:72 F-4J Phantom II for Academy • 1:32 Spandau guns, WW1 • 1:48 Spitfire Mk.XVI gun bays for Eduard • 1:48 Spitfire Mk.XVI engine for Eduard HAULER hauler.cz • 1:72 T-34 crane conversion • 1:48 PE for Pz38(t) for Tamiya REVELL www.revell.de/en • 1:35 T-34-76 • 1:144 MiG25 Foxbat • 1:72 Handley Page Halifax B. MkIII • 1:48 Mil Mi24D Hind • 1:25 2014 Ford Mustang GT

TYPE 10 AND MOSQUITO BUILDS?

Apologies for the lack of this month's instalment of our RC Type 10 and 1:32 Mosquito builds, they will return soon! The Editor

4

NEW FROM TAMIYA! 1:35 M4A3E8 ‘EASY EIGHT’ SHERMAN

Photo; Wikimedia Commons

Tamiya has announced an almost 100% new kit (road wheels and other small parts use existing moulds, most likely from the recent M51), of the M4A3E8 variant of the legendary Sherman medium tank, known fondly as 'Easy Eight' by its crews thanks to the relatively smooth ride offered by its Horizontal Volute Spring Suspension (HVSS). Some of the 2,500 examples produced were in time to appear in the Battle of the Bulge of the winter of '44-'45 and it also served in the Korean War. Film buffs will no doubt also recall that the "Easy Eight" was the star of the 2014 hit film 'Fury'. More news on the kit soon. www.hobbyco.net

ON THE WAY BACK FROM TAMIYA 1:10 RC MONSTER BEETLE

NEW FROM TAMIYA! 1:12 HONDA RS1000 ENDURANCE RACER

The legendary Monster Beetle is to return! Tamiya have revived this 1986 model which uses the Sand Scorcher body and a huge 2WD chassis for maximum off-road fun. Also on the way is a set of eight Afrikakorps Luftwaffe figures, originating from ICM. www.hobbyco.net

As we mentioned last issue, Tamiya are indeed to re-release the 1:12 Honda RS1000 Endurance Racer kit, which was originally launched in 1983. Tamiya's bikes have always been ahead of their time, so the detail on this will be ultra crisp. Further details soon! www.hobbyco.net

NEW FROM REVELL 1:24 PORSCHE 918 SPYDER The 1:24 Porsche 918 hypercar has arrived from Revell and it features a full replica of the cabin, plus engine and chassis detail. Revell model kits are available from all good toy and model retailers. For details visit; www.revell.de/en, @RevellGermany or facebook.com/revell

October 2015 TMMI 240

p 04-05 News 240MN.indd 4

01/09/2015 17:36

www.grandprixmodels.com

LEC CRP01 - Belgian GP 1977 David Purley 1:43 metal kit by This Way Up

NEW FROM BRONCO 1:35 AIRSPEED HORSA GLIDER As this was being written, the brandnew 1:35 Horsa glider from Bronco arrived, and it's an impressive model (Kit Preview next issue). Here are some teaser images of the test-shot parts. For details visit; www.hannants.co.uk

Honda S600 roadster 1964 1:24 plastic kit by Tamiya

WIN REVELL KITS! NEW FROM EDUARD - NEW PE SETS New photo-etched sets from Eduard include metal parts for Revell's new 1:32 Fw190F-8, HK Models' 1:32 Mosquito B.IV, Tamiya's 1:35 Somua S35 tank and ICM's new 1:35 Horch 108 Typ40. www.eduard.com www.creativemodels.co.uk

Win the Revell Star Wars Snowspeeder TMMI is offering you the chance to win some cool Revell kits of all types, scales and subjects! This time, it’s the Star Wars Snowspeeder.

NEW FROM POCKETBOND NEW TAKOM 1:35 CHIEFTAINS The big news recently is the creation of an all-new Chieftain tank in 1:35, from Takom. So far we have the Mk.10, Mk.11 and Mk.5/P and hopefully more will follow. Great times for postwar armour! Also on the way is an AS565 Panther helicopter in 1:35, 1:35 BRDM-2 NBC from Trumpeter, plus a rather spectacular 1:16 radio control M-ATV MRAP. www.pocketbond.co.uk

5

November 2006 TMMI 133

p 04-05 News 240MN.indd 5

All you need to do is answer this question; Q; In ‘The Empire Strikes Back, which Imperial ‘vehicles’ do the Snowspeeders famously attack? You can email your answers or send a postcard to our main office address, below. Please don’t forget to add your name and postal address so we can send you your prize!

[email protected] Star Wars Snowspeeder Tamiya Model Magazine International ADH Publishing, Doolittle Mill, Doolittle Lane, Totternhoe, Bedfordshire, LU6 1QX, UK In conjunction with Revell Ltd. www.revell.de/en

Ligier JS5 Brazil 1976 1:20 resin & metal kit by Studio 27

Honda NSR500 FIM 1989 Franco Chili 1:12 plastic kit by Hasegawa

Mail order specialists for over forty years, we also have a showroom which is open on the first Saturday of every month from 12 noon – 5pm. Please contact us for details

Grand Prix Models

4 Thorpe Close, Thorpe Way Banbury, Oxon, OX16 4SW. Telephone UK 01295 278070 Fax 01295 278072 from outside UK +44 1295 278070 Fax +44 1295 278072 [email protected]

01/09/2015 17:36

New Arrivals

6

A brief look at kits that have recently arrived at TMMI HQ!

KITTY HAWK, CHINA 1:48 F-35C LIGHTNING II ITEM NO.KH80132 • www.hannants.co.uk The unusual airframe patterning of the F-35 is well replicated here, and the rest of the model is a complex, highly detailed affair too

REVELL, USA 1:24 PORSCHE BOXTER SNAP-TITE ITEM NO.85-1984 • www.revell.com • www.revell.de/en A tidy and quick-to-build replica of Porsche’s entry-level car will be found in the box; chromed wheels headlight reflectors plus coloured-plastic rear lights feature

ZVEZDA, RUSSIA 1:35 SOVIET ARMY 1.5 TON TRUCK ITEM NO.3602 • www.hobbyco.net A useful kit for dioramas and smaller vignettes, with some neat touches of detail. Not as sophisticated as MiniArt’s GAZ AA kits and there’s some rather heavy shot-blast texturing on the front wings and cabin exterior

DRAGON, HONG KONG 1:35 PANZERJÄGER II FÜR PAK40/2 MARDER II EARLY PRODUCTION ITEM NO.6769 • www.hobbyco.net A popular subject and a much-wanted kit that features all the modern refinements you’d expect from Dragon. Features updated deck area and Dragon Magic Tracks, plus a small photo-etched brass fret

ITALERI, ITALY 1:72 WATERLOO 200 BATTLE AT LA HAYE SAINTE ITEM NO.6111 • www.hobbyco.net With the 200th anniversary of Waterloo just passed, this set was well timed. British Infantry, British 95th RGT Green Jackets, French Line Infantry and French Imperial Guard Artillery (X2 sprues each) plus laser-cut board La Haye Sainte farm buildings included

REVELL, EUROPE 1:72 UH-60A TRANSPORT HELICOPTER ITEM NO.04940 • www.revell.com • www.revell.de/en A decent kit of the ubiquitous Blackhawk helicopter, with a competent interior. Raised panel lines on the exterior, but very fine and not a big deal

REVELL, EUROPE 1:72 SUKHOI SU-27SM FLANKER ITEM NO.04937 • www.revell.com • www.revell.de/en In the box we have the sprues from Zvezda’s excellent kit of the Flanker, moulded with great finesse and sporting a fine, satin finish across the airframe. A very attractive kit indeed

ICM, CZECH REPUBLIC 1:35 LASTKRAFTWAGEN 3.5T AHN WITH SHELTER ITEM NO.35417 • www.hannants.co.uk This is a lovely new kit from ICM, featuring engine, suspension and finely detailed ambulance bodywork

October 2015 TMMI 240

p 06-07 NewArrivals 240MN.indd 6

28/08/2015 16:45

BRONCO, HONG KONG 1:35 PACK HOWITZER M1A1 (BRITISH AIRBORNE VERSION) AND GUN CREW ITEM NO.CB35173 • www.hannants.co.uk The purposeful-looking M1A1 Pack Howitzer is coupled with a five-man crew of British Paras in this release, making a potentially superb vignette, all in one box

BRONCO, HONG KONG 1:72 BLOHM & VOSS BV P178 ITEM NO.CB7001 • www.hannants.co.uk Here we have a second version of B&V’s curious, asymmetrical jet-bomber proposal, this time coming with a BT700 guided missile slung on its centreline mount. Lovely detail and an easy-looking build

BRONCO, HONG KONG 1:35 PANZERBEFEHLSWAGEN 35(t) ITEM NO.CB35205 • www.hannants.co.uk Bronco’s excellent Pz35(t) gets a ‘bedframe’ aerial on its rear deck plus a radio rack and large radio set in its interior, creating this command version. Superb detail all round with a full fighting compartment

EDUARD, CZECH REPUBLIC 1:48 MIG-21PF WEEKEND EDITION ITEM NO.84127 • www.eduard.com • www.creativemodels.co.uk Eduard’s brilliant MiG-21 is in Weekend Edition here, with markings for a Soviet Air Force machine based in Czechoslovakia, 1968 and a DDR aircraft from the late 1980s. Sublime detail and accuracy

GWH, CHINA 1:48 MiG-29 SMT Fulcrum 9-19 ITEM NO.L4818 • www.creativemodels.co.uk The latest version of the MiG-29 from GWH (Great Wall Hobby/Lion Roar) is the SMT with hump-back fuel tank and HOTAS cockpit upgrades. The kit features state-of-the-art detail and moulding techniques and detail

ITALERI, ITALY 1:24 REEFER TRAILER ITEM NO.3904 • www.hobbyco.net Very nicely detailed refrigerated trailer that will match perfectly with any number of European tractor units. Well moulded, with crisp, black vinyl tyres

MOEBIUS MODELS, USA 1:24 SMOOTH SIDE TRAILER WITH REEFER OPTION ITEM NO.1303 • www.moebiusmodels.com If you prefer US trucks, this magnificent new trailer (with refrigeration) system forms an ideal load for any modern US tractor

EDUARD, CZECH REPUBLIC 1:48 F6F-5 HELLCAT LATE ITEM NO.8224 • www.eduard.com • www.creativemodels.co.uk The late-war variant of Eduard’s fantastic 1:48 Hellcat, with four decal options for Dark Sea Blue aircraft operational in the Pacific, 1944-45. Includes resin wheels, PE and pre-cut masks TMMI 240 October 2015

p 06-07 NewArrivals 240MN.indd 7

7

28/08/2015 16:46

FULL-BUILD: MODEL RACING MOTORCYCLE TAMIYA 1:12 DUCATI 1199 S ● ITEM NO.14129

AN AN 'S' 'S' FOR FOR SENN SENN I

n the 1990s, the Castiglioni brothers, owners of the Ducati factory, maintained such good relations with the Formula 1 driver Ayrton Senna, they decided to dedicate a limited series with the legendary 916. It was the Brazilian who chose the metallic grey and bright red colours during a factory visit in 1994, just weeks before his fatal accident at Imola. Until 1998, several batches of the 916 and 996 were produced exclusively

8

for the Brazilian market. To commemorate the twentieth anniversary of the death of the driver, the Bolognese firm decided to honour him by finishing their 1199 Panigale S by in the grey and red livery too. Only 161 examples were made, numbered from 001 to 161 (the number of times Senna took part in a Grand Prix) were produced for Brazil and just one machine, numbered 000, was reserved for the European market. It was acquired at auction

in Monaco on the 17th of May 2014 by the Italian rider Max Biaggi, who, like Ayrton Senna, has been either loved or hated but always respected! Another very lucky (and talented) chap by the name of Sébastien Ogier was given bike No.016 by the team he drives for – Volkswagen WRC – to say 'thank you' to him for winning 2014 WRC Championship. He promised not to ride it, but to leave it on display in his living room. I hope he was joking!

BLUE STUFF

I'd like to offer my warmest thanks the French producer 'Bluestuff' who has released this decal sheet for use on Tamiya's wonderful kit of the bike. The new darker scheme makes the bike look more aggressive; the contrast between the metallic grey of the fairings and flaming red rims is really outstanding. To emphasis the wonderful ease of assembly of the Tamiya Panigale, together with a simple but beautiful livery,

October 2015 TMMI 240

p 08-14 SennaPanigale 240MN.indd 8

28/08/2015 17:19

Philippe Devos enjoyed building the Ducati 1199 so much, he could not resist another; this time a conversion to the Ayrton Senna 'S' version with decals from Blue Stuff

The Blue Stuff decal sheet is small but busy. It provides all the markings needed for this very special bike.

It is very important to prepare the fairing parts before painting. The remains of the sprue attachment points were removed with a new blade and finished with sandpaper.

NNA NNA

Once the fairing elements had been removed from their sprues and tidied up, precise sanding and edge-scraping was performed on all the parts, to remove the last traces of moulding seams etc. 800 to 1200-grit was used for a finish as smooth as possible.

I set myself a target of ten days to complete the bike, including drying time. Basically this means that, without too much effort, you can have this amazing-looking replica in your showcase rather quickly. Forza Brasil! ●

A small mishap occurred when sanding the saddle; the location-pin broke off... After drilling a small hole, a 4mm screw was substituted.

Following a layer of grey primer via a Tamiya aerosol, the metallic grey layer (Tamiya TS-38 Gunmetal) was applied in several thin layers, by airbrush.

TMMI 240 October 2015

p 08-14 SennaPanigale 240MN.indd 9

9

28/08/2015 17:19

FULL-BUILD: MODEL RACING MOTORCYCLE TAMIYA 1:12 DUCATI 1199 S ● ITEM NO.14129

The TS-38 is quite matt, so it was given a generous layer of TS-13 Clear. After drying for a few days, the hunt for dust was launched. A very light but thorough sanding was performed, followed by going-over with polishing compound in order to create a perfectly smooth, shiny surface.

To conclude the main painting, the author dutifully masked off the upper parts of the side fairings and applied a coat of TS-29 Semi-Gloss Black (aerosol).

decals are of incredible finesse, “soThe they quickly and easily adhered to the perfectly smooth surfaces... ” The decals – of which there are few – are of incredible quality, so they quickly and easily adhered to the perfectly smooth surfaces. A drop of softener was used, but just out of habit. A varnish layer could be applied but this is not essential.

The rims must be prepared carefully, as the red on black will be highly visible. So the spokes could remain in scale, Tamiya was forced to mould sprue-supports inside. Even though their sprue gates are tiny, particular attention must be paid to their removal, as does the joint line that runs around the inside. Cutters, a small round-file and sandpaper are the way to go here. The first layer (which pleased the author’s daughter) was made using the new pink primer from Tamiya. It covered well, dried quickly and is very fine-grained; it's perfect! The transition to red really easy because its coverage is optimised by the pink. Now we need a black primer, plus yellow, green, blue...

All parts of the black frame set (there are many) received a coat of Tamiya’s light grey primer to even out the surface.

The other mechanical parts were divided by colour which allows the rapid painting of all these elements. The author used Aluminium (TS-30), Titanium Silver (X-32), Gunmetal (XF-56), Flat Black (XF-1), a bronze mixture (X-33 +X-31) and Modelmaster Titanium for the exhaust.

10 October 2015 TMMI 240

p 08-14 SennaPanigale 240MN.indd 10

28/08/2015 17:19

To avoid the tedious task of drilling the many holes in the brake discs, they can be represented by a little trompe-l'oeil with diluted acrylic black paint, deposited in the recesses. Once fully dry, the surface was gently sanded with ultra-fine grain (Micro-Mesh 12,000) with plenty of water.

and

The front fender was made of carbon-fibre on this machine. To facilitate the application of the decals, the surface was divided into four parts, each reproduced on a portion of masking tape by rubbing the edges with a graphite pencil.

Using directional carbon-fibre decal involved making a symmetrical 'chevron' from the top of the mudguard. Tape was applied to the back of the sheet, but due to some misalignment, the direction of the 'weave' came out wrong.

The orientation error has been corrected! Studio27's decals used here are of remarkable quality and are strong enough to withstand handling. Tamiya X-20A thinner was used as a softener, which produced a frighteningly wrinkled effect upon application, but don't panic! As it dried, the decal shrank perfectly onto the shape of the mudguard.

TMMI 240 October 2015

p 08-14 SennaPanigale 240MN.indd 11

11

28/08/2015 17:19

FULL-BUILD: MODEL RACING MOTORCYCLE TAMIYA 1:12 DUCATI 1199 S ● ITEM NO.14129

By observing photos of the real machine, we can see two small hoses from the nuts of the fork crown and on the rear shock. These are the electronic controls for the suspension settings.

Other parts also experienced the same alarming effect, but dried to a perfect finish as we can see in the final shot, below.

12 October 2015 TMMI 240

p 08-14 SennaPanigale 240MN.indd 12

28/08/2015 17:19

After glue autho modi

Everything comes to him who is prepared to wait! Once dry, we are treated to beautiful-looking parts, subtly covered with a thin coat of Tamiya TS-79 Semi-Gloss Clear for an impeccable finish.

This time, a trap was avoided and part C35 was fitted first, unlike my last Panigale build!

After making a glue stain on the upper part of the headlight lens (the glue is not absolutely necessary but it was an excess of zeal by the author), a carbon-fibre decal ‘eyebrow’ was ‘invented’. This unofficial modification hid the glue mark without being too noticeable..

To avoid further blunders, gluing on mirrors was done with the cowling on, but without the windscreen! This is easy to add at the end of assembly and stays put thanks to Tamiya’s precise engineering.

TMMI 240 October 2015

p 08-14 SennaPanigale 240MN.indd 13

13

28/08/2015 17:19

FULL-BUILD: MODEL RACING MOTORCYCLE TAMIYA 1:12 DUCATI 1199 S ● ITEM NO.14129

The gunmetal bodywork of the Senna special transforms the bike into something quite spectacular.

MODELSPEC TAMIYA 1:12 DUCATI 1199 S ITEM NO.14129

Accessories used:

Blue Stuff: Ducati 1199 Panigale S Senna decal set (12-003) Tamiya: Ducati 1199 S fork set (12657)

Paints used:

Tamiya Sprays; White, Pink and Grey Surface Primers, TS-29 SemiGloss Black, TS-30 Aluminium, TS-38 Gunmetal, TS-49 Bright Red, TS-13 Clear, TS-16 Yellow Tamiya Acrylic; X-19 Smoke Prince August Acrylics; Aluminium Citadel Acrylics; Chaos Black, Mithril Silver Tamiya Enamels; X-31 Titanium Gold, X-32 Titanium Silver, X-33 Bronze XF-56 Metallic Grey. Alclad 2; Smoke. Modelmaster; Titanium

Tools used;

Scalpels blades No.10 and 11, 400, 800, 1000, 1200-grit wet and dry sandpaper, Micro-Mesh sanding sticks, Mini drill with 0.5, 0.7, 1.5mm bits, superglue, Tamiya Extra Thin Liquid Cement, Tamiya HG Trigger Airbrush, small files, nail files, Tamiya small scissors, 18mm and 40mm Tamiya Masking Tape, Aizu 0.7mm Masking Tape, Tamiya Compound Fine, Tamiya Modeling Wax, Maskol

14 October 2015 TMMI 240

p 08-14 SennaPanigale 240MN.indd 14

Old and new; the author’s initial build of Tamiya’s Panigale (TMMI Issue 230, December 2014) contrasts with the Senna version perfectly.

28/08/2015 17:20

www.creativemodels.co.uk

Mod

el b

yW ayn

eH

ui

lb

de

Mo

re

oo

yM

rem

e yJ

Get Creative!

HOBBYBOSS, VALLEJO, MODEL MASTER, MINIART, MASTER BOX, AK INTERACTIVE, MIG PRODUCTIONS, PLUS MODEL AND MANY MORE...

Unit 6-10, Honeysome Ind Est., Honeysome Road, Chatteris, Cambs. PE16 6TG

www.creativemodels.co.uk Tel: +44(0)1354 760022

p 15 CreativeModels 240.indd 1

28/08/2015 16:26

FULL-BUILD: MILITARY AVIATION KITTYHAWK T-6 TEXAN ● KIT NO.32001

E L D D

SA T

he North American T-6/SNJ 'Texan' was an advanced trainer for most Allied air forces from World War II through to the mid 1950s. During World War II, flying the T-6 was usually the last step in training before a pilot was assigned to a fighter or attack squadron. Built originally for the US Army Air Corps, the 'Texan' was also flown by the US Navy where it was designated 'SNJ'. It also served in all of the British Commonwealth Air forces, China and in several Central and South

! P U

hing c t a ye-c North e s i th h of the i w urns 1:32 kit t e r ui awk's ainer H e yn Kittyh exan tr a W d of -6 T buil erican T Am

American countries as well. The Australian Air Force modified the T-6 during the early stages of WW2 with additional .50cal guns to create the stopgap 'Wirraway' fighter. During the Korean War, the T-6 was used by the US Air Force as spotter and forward air control aircraft. They were called 'Mosquitos' because of the sound of the aircraft made as it flew at low speed over the target area. Initially, they carried weapons such as rockets and machine gun pods under the wings but they were

ordered to be removed later. It was possible that having weapons made the pilots felt inclined to attack ground targets themselves instead of doing their intended job.

THE KIT

The kit provides a detailed cockpit complete with fuselage framing and a detailed engine bay. I contemplated ways to allow all these details to show through on the finish model. I thought of opening up a section of the fuselage skin to show off some of the interior. The set of

photo-etched seat belts provided in the kit looks very nice, but I replaced the parts with a set of home made seatbelts made from wine bottle foil; the buckles were cut from thin styrene card. I used a set of Eduard photo-etched seat belt buckles as the template to do the cutting. The throttle quadrants part provided in the kit looked way too small and not realistic, so, I scratchbuilt a new pair of throttles for both cockpits. To make the round grip on the throttle handles, I used the catalyst balls

16 October 2015 TMMI 240

p 16-20 Texan 240MN.indd 16

28/08/2015 17:24

Above and below; Eduard seatbelt buckles were mounted on strips of metal foil to form the very effective-looking cockpit harnesses, front and back.

found in disposable water filtration cartridges. I cut open a Brita water cartridge and sorted through the mass of carbon crystals and catalysts. I was rewarded with a lifetime supply of little round balls to use for model building!

Once painted in a canvas colour, the harnesses look very convincing.

U

Instrument panels in close-up; the decal dial faces look just right.

TMMI 240 October 2015

p 16-20 Texan 240MN.indd 17

17

28/08/2015 17:24

FULL-BUILD: MILITARY AVIATION KITTYHAWK T-6 TEXAN ● KIT NO.32001

V

I painted the cockpit with acrylic interior zinc-chromate green. The instrument panels looked rather plain and the details were shallow. However, instrument panel decals were provided to apply over this surface and they looked rather good, with sharp details for the dials. I used Gunze's Mr. Mark Softer to help settle the decals and it worked perfectly with no melting. To my pleasant surprise, the instrument panel decals fit perfectly over the raised details of the instrument panels! That was too easy. The engine oil compartment bay between the engine and the cockpit firewall looks really nice but it sure could use more details such as hoses and wiring. However, all this detail would never be seen again once the fuselage sides were glued together. Once I glued the fuselage halves together the construction proceeded very quickly. The fuselage halves generally fitted together very well. The fit of the cockpit within the halves was very tight and I had to apply pressure to press these parts together while the glue was drying. The same pressure-fit was required to minimize the gaps between the top deck of the fuselage (part D5) to the instrument panel.

Despite my best efforts, a bit of putty was required to smooth out the gaps at these locations. During sanding, some of the raised rivets were sanded off which was unavoidable. However, these rivets were easily replaced with new ones made from snippets cut from stretched sprue. Thankfully, the central wing fitted perfectly to the fuselage and I did not expend any additional effort to smooth out these joints. Small gaps at the wing panel joints were filled using a liquid filler. You don’t have to buy aftermarket grooved wheels when you can do it yourself. I created tyre grooves by firmly holding a scribing tool on the table while I pressed the wheel up to the tool head and turn the wheel to score the groove. I used Squadron’s scribing tool (10202) to do this work. I noticed two weaknesses in this kit. The plastic used is soft, which is easy to cut and trim, but the down side is the surfaces of the fuselage and wings can be easily scratched and even chipped thus making repairs a necessity. The soft plastic also made the landing gear another source of weakness in this kit. When the model sat on its landing gear I noticed the 'fork' bend slightly under the weight. What this means is when

Peering down into the cockpit sub-assembly reveals the side console detail and the instrument bodies on their panel

The radial engine takes shape; detail is excellent and looks convincing under a layer of paint and light weathering.

The engine back plate is seen here, with exhaust outlet on the left of the photo.

The cockpit builds up into a module that includes the engine mounts and engine. Note the oil tank in yellow.

Viewed from the other side, we can see the radio as well as the re-made throttle quadrants, front and rear.

18 October 2015 TMMI 240

p 16-20 Texan 240MN.indd 18

28/08/2015 17:24

I glue the wheels on, their alignment must be offset a bit to account for the flexing of the landing gear in order for the wheel to look straight when sitting. I think this might be okay when the model is new but I expect them to bend a bit more as the model age over the years. I think model manufacturers should provide cast-metal landing gear as a standard feature for 1:32 scale models! At the fuselage joints, I filled most of the gaps with thick cyanoacrylate glue and sanded them smooth. Panel lines and rivets that were removed during sanding were rescribed.

Mr Surfacer 1000, a form of liquidised putty, was used to seal up hairline gaps between larger components, in readiness for the painting processes to follow.

PAINTING

To prepare the model for a natural metal finish, I primed it with a light coat of Alclad 2 Grey Primer. This material is a lacquer-based primer and it 'grips' the plastic very well. However, the lacquer is a fast drying medium and thus it left a grainy surface as the primer dried. I polished the model again with a 4000 grit cloth until the primer was smooth. The only disappointment for me with this kit is the choice of markings. Although the markings are colourful, they are markings for modern day T-6 in private or local air museum collections. It would have been nice if they had provided at least a few choices of marking for battle veterans so I could install some of the external rockets and gun pods. I thought of doing ‘Deb’ with the colourful American flag around the cowl but I think the alignment of this decal around the compound curves of the cowl is problematic.

Redundant features on the fuselage were filled in with plastic card.

You don’t always need aftermarket wheels when you can do it yourself. Tyre grooves were created rotating the tyre against a scribing tool, held firmly on the table.

Alclad 2 grey primer was used as a foundation layer for the colour coats. This was lightly sanded back to remove graining.

Testors ModelMaster Bright Yellow was used on the wings and tail surfaces.

U The yellow was masked off and Alclad 2 Aluminum and Polished Aluminum were airbrushed on to replicate the bare metal finish of the fuselage and inner wing sections.

TMMI 240 October 2015

p 16-20 Texan 240MN.indd 19

19

28/08/2015 17:24

FULL-BUILD: MILITARY AVIATION KITTYHAWK T-6 TEXAN ● KIT NO.32001

V

I selected the colourful Italian Trainer aircraft from the decal sheet as it offers a nice combination of natural metal and bright yellow surfaces. The kit decals depict the privately owned T-6G aircraft I-SSEP in Italy. To properly build this aircraft, one should not follow the kit's drawing and attach the black direction finder 'football' on the rear fuselage. Instead, this area needs a whip antenna. To avoid damaging the aluminium paint with masking tape, I painted all the yellow surfaces first. I used Model Master enamel Bright Yellow to paint the yellow surfaces. I buffed the paint surfaces with a 6000 grit polishing cloth after each coat of yellow paint for a beautiful smooth finish. After two days of drying, I masked off the yellow surfaces of the wings and the tail surfaces in preparation for the aluminium paint. I used Alclad 2 Aluminum for the natural metal finish and to obtain differing sheens to simulate aluminium panels, I painted the removable fuselage panels with Polished Aluminum and buffed it up. Although the real aircraft is kept in a pristine condition, I choose to weather the model a bit to make it more interesting. I hand brushed streaks of black-brown colour-wash along the panels near the engine to simulate oil leaks. This is done very lightly and carefully as I do not want to beat up this model. Finally, I scratch built a whip antenna from styrene and painted it white and attached it to the finished model. I don’t think the real aircraft carried any external tanks, but I choose to add the kit's external fuel tank for interest's sake.

CONCLUSION

I really like the quality of this kit because the fit was good, with nice detail on the parts and the recessed rivets/panel lines are not excessively deep. This T-6 model kit has potential for super detailing if one chooses to open up the fuselage panels to let the cockpit internal framework and other details to show through. The overall shape and length of the model measured well against scale drawings in the Squadron Signal Publications’ T-6 Texan in Action book. I only noticed the wheel well door panels are excessively long: They should not extend beyond the top of the wheel rim. Otherwise, this is fine kit from Kittyhawk of a classic subject that has never received treatment in 1:32 until now. ●

MODELSPEC KITTYHAWK 1:32 T-6 TEXAN KIT NO.32001

Paints used;

Model Master; Bright Yellow, Italian Red, Interior Green. Testors; Zinc Chromate Gunze; H11 Flat White, H2 Black Alclad 2; Aluminum, Polished Aluminum

References:

T-6 Texan in Action, Aircraft Number 94, Larry Davis, Squadron/Signal Publications, ISBN 0-89747-224-1

Availability;

www.hannants.co.uk

20 October 2015 TMMI 240

p 16-20 Texan 240MN.indd 20

28/08/2015 17:25

p 21 AirbrushCo 240.indd 8

28/08/2015 16:27

FULL-BUILD: COMPETITION CAR FUJIMI 1:24 MCLAREN MP4-12C GT3 ● KIT NO. RS 74

A

fter winning nine WRC World Champion titles, French driver Sébastien Loeb withdrew from this branch of motorsport. Not known to rest on his laurels, the Alsatian driver had many projects on the boil including, amongst others, the climb of Pikes Peak and GT endurance races. To prepare for future events such as Le Mans, the driver participated in a few races with his team (Sébastien Loeb Racing) in the FIA GT Championship where he finished third, driving a McLaren MP4-12C GT. The car was equipped with a 3.8-litre, twin-turbo V8 outputting over 600bhp. The chassis consisted of a carbon-fibre monocoque with an aluminium frame at the front and rear, plus a lightweight carbon-fibre body. The gearbox was a pneumatic, sequential six-speed with paddle shifters. This car can be re-created in 1:24 by using Fujimi 1:24 kit of the McLaren MP4-12C GT3 plus various transkits for detailing and decalling.

To create the car driven by Sébastien Loeb in 2013, the author used Tabu Design decal's with Fujimi kit.

The author also used a photo-etched set from Hobby Design which includes ventilated brake discs, wiper, pedals, dashboard display and buttons for the dashboard, not to mention many other things. A real treat!

Studio 27’s carbon-fibre effect decal sheet is dedicated to Fujimi’s McLaren MP4-12 C GT. It greatly helps the work needed by the modeller, not to mention the time saved.

A BIG MAC W Olivier Crumbach builds a 1:24 replica of Sébastien Loeb's McLaren MP4-12C GT3, from the 2013 FIA GT Championship

22 October 2015 TMMI 240

p 22-26 McLaren 240MN.indd 22

28/08/2015 16:52

TIME MANAGEMENT

As almost always, I started this project by building the body. This allowed me to save valuable time since I could take care of the interior while the body paint dried and cured thoroughly. Upon taking the main body moulding from the bag, I was amazed by the large amount of excess plastic that had to be removed from each side of the 'shell. Presumably this was to ensure rigidity and reduce distortion during the de-moulding process, after the plastic had been injected. The doors and side vents are moulded separately and their fitment would require no special effort as everything measures up to the millimetre. Having planned to use a detail set that includes the ventilation grilles, those moulded in plastic, both front and rear, were removed using a new X-Acto blade.

A significant amount of scrap material was removed from the body. We must be careful not to remove too much from the wheel-arches, or the penalty will be long sessions of filling and sanding.

PAINTING THE BODY

After degreasing, I prepared the body with Tamiya Surface Primer white. After drying, I sprayed several thin layers of TS-26 White (decanted, via airbrush) for faster drying. Although the livery consists of three colours (white, blue and metallic grey), it was only necessary to paint the central metallic grey band that runs from the front to the rear of the car; the blue stripes that flank the body are represented by decals, as we shall see. For the metallic grey, I had several choices open to me; Tamiya TS-17 Gloss Aluminium, TS-30 Silver Leaf or TS-83 Silver Metallic. So I did some tests on pieces of plastic and it was TS-83 that appeared closest to the actual hue when compared to pictures of the real car that I had gathered for the project.

The front air vents were removed using an X-Acto The side vents and doors were assembled dry to blade and the apertures then sanded out; the check their fit. The vents would not yet be fitted in same thing was done at the back of the bodywork. order to ease the decal application process. The louvres were glued in at this step because they’ll be painted in the same body colour.

WITH WINGS!

TMMI 240 October 2015

p 22-26 McLaren 240MN.indd 23

23

28/08/2015 16:51

FULL-BUILD: COMPETITION CAR FUJIMI 1:24 MCLAREN MP4-12C GT3 ● KIT NO. RS 74

A DECORATION WHICH GIVES YOU 'WINGS'

Sébastien Loeb's main sponsor for several years was the Red Bull energy drink and the logos are present on the McLaren GT3 too. In order to replicate this scheme on the model, I used Tabu Design's decal sheet (No.24034). Tabu's markings are magnificent; the colours are accurate and the transparent carrier-film around the decals is almost nonexistent. I started application with the blue bands and given the complexity of the car's shapes, I briefly contemplated painting them instead of using the waterslide markings. But this would have presented a major challenge in masking up for the blue areas, so instead, I armed myself with patience and a full bottle of Microsol decal solution!

I applied the blue markings onto the louvres of the front wings, then the other three that wrap around. The task was a bit daunting around the curves of the front spoiler but with a little smoothing using a flat brush soaked in Microsol, the decals managed to fit the shapes.

MOVE INSIDE

Somewhat surprisingly, the cabin's inner surfaces are moulded integrally with the engine deck; I will return to this later... To represent the alcantara dashboard, seat and steering wheel, I used XF-24 Dark Grey mixed with X-21 Flat

After spraying the primer and TS-26 White (and allowing them to cure), the areas of the body to be painted TS-83 were masked off with masking tape. With the tape off, the body was then given several coats of Mr Hobby varnish (airbrushed) in anticipation of the decal application process.

After a light sanding of the varnish with 2000-grit paper and water, the blue decal strips were affixed. Tabu Design's Decals reacted very well to Microsol The final decals (logos and names of the drivers) and the bands perfectly fitted the convoluted forms After a liberal application of Micro-Sol, the of the bodywork. However, this did not prevent two author waited forty-eight hours for the solvent to were then positioned, as was the carbon-fibre evaporate before applying a final gloss varnish. fuel-filler surround from the Studio 27 sheet. tears appearing at the base of the rear pillars.

The painting of the rear panel demanded a complex masking job; Tamiya tape eased the task.

X-18 Semi-Gloss Black was then be applied without the risk of overspray. We must follow the same techniques for the window surrounds and the bonnet vents.

The author chose to separate the floor/centre console to facilitate the painting of the interior.

Here we see the work on the window aperture surrounds.. The body was finally ready to receive its last elements.

The console buttons were replaced by metal ones turned from Hobby Design, undeniably better looking! The alcantara colour was attained by mixing XF-24 Dark Grey and X-21 Flat Base. The seat gets its Kevlar back surface from Studio 27’s sheet and the extinguisher was painted in Testors Chrome Silver (1790).

24 October 2015 TMMI 240

p 22-26 McLaren 240MN.indd 24

28/08/2015 16:51

Base. After spraying, the finish looks a little satin but as it dries, it becomes very flat replicating the alcantara synthetic suede well. The extinguisher was painted with Testors Chrome Silver (1790) and the photo-etched parts were then shaped and installed in place of the original plastic mouldings. I wondered whether to add wiring, but with the doors closed and the interior very dark, I decided to stop there.

A 'LITTLE' MECHANICS

I will discuss here the most disappointing part of this kit; the engine. I expected this to be

represented in more detail, but instead we have a rather crudely formed V8, moulded into its compartment. Only the cylinder-head covers, the main block and the two rear filters are represented which was a little disappointing, especially as it's really not practical to paint it all. The back cover is not openable, but considering the large rear windscreen, it deserved more attention. I used Testors Aluminium (1401) on the engine block and filters. The cylinder head covers were painted XF-1 Flat Black as were the various pipes. And it was done! From memory, this was one of the quickest to paint engines I've ever experienced!

Harness hardware also come from the set by Hobby Design. The belts were made of a red cloth ribbon found in haberdashery shop. The flat areas of the To paint the representation of the engine, the interior door panels and the rear wall are decals by author brought out his paint brushes. Fujimi Pit Wall. The rollcage consists of only three pieces; could have better detailed this part of the model. and was painted Testors 1406 Black Metal.

The entire cockpit/engine was then cemented to the frame, after having been coated with Tamiya TS-79 Semi-Gloss Clear. Note the magnificent ventilated discs brakes by Hobby Design.

Photo-etched radiators and fuel caps, fitted to the body. Here are the assembly steps for the Hobby Design brake rotors. The author made an assembly jig using plastic card and metal rod to accurately align the eleven parts that make up each disc.

Fujimi have captured the profile of the mighty McLaren extremely well and the decals look magnificent.

To ‘erase’ the central moulding seam of the tyres and create a lightly worn effect, the author used model wheel mounted on a metal rod, fitted in the chuck of a small electric drill. The tyre was rotated against sandpaper, et voila!

Then it was the turn of very clear glazing parts, whose edges had been previously painted.

TMMI 240 October 2015

p 22-26 McLaren 240MN.indd 25

25

28/08/2015 16:51

FULL-BUILD: COMPETITION CAR FUJIMI 1:24 MCLAREN MP4-12C GT3 ● KIT NO. RS 74

FINISHING OFF

Curiously, the small, removable driver-side window is moulded on the inside and not outside and I must confess, I've no idea why... Anyway, Fujimi provides the masks for the windows, which greatly eases the painting process. Be careful to apply the mask for the front windscreen from the inside and the side windows from the outside, because it is not specified in the instructions. A shot of X-18 Semi-Gloss Black, et voila!

TO CONCLUDE

Apart from the under-detailed engine and some inaccuracies within the instructions on the colours to be used, Fujimi has created a kit of a good standard that's very easy to build and very topical. To achieve this result, I needed to acquire and use several sets of aftermarket accessories, but to me, it was worth the effort. And I can now proudly display another racing car driven by France's hero, Sébastian Loeb. Forza Loeb! ●

MODELSPEC FUJIMI 1:24 MCLAREN MP4-12 C GT3 KIT NO.RS 74

Materials;

Plastic injected white, black, transparent, flexible vinyl tires, nylon rings, decals, metal rod, photo-etched

Paints used;

Tamiya Sprays: White Surface Primer, TS-26 White, TS-83 Metallic Silver, TS-79 Satin polish Mr Hobby Spray: Super Clear varnish Tamiya Acrylics: XF-1 Flat Black, X-18 Semi Gloss Black, X-7 Flat Red, X-8 Yellow, X-27 Clear Red, X-19 Smoke, X-21 Flat Base, XF-24 Dark Grey, XF-2 Flat White Testors: Aluminium 1401, Silver Chrome 1790, Black Metal 1406, Gunmetal 1405, Steel 1780 Accessories used; Hobby Design: photo-etch (HD02-0203). Tabu Design: decals S.Loeb (TABU-24034). Studio27: 1:24 MP4-12C GTB Carbon Decal (ST27CD24011). Pitwall: 1:24 Carbon Decal (24C-1)

The installation of certain decals on complex parts of the model may scare some, but Tabu Design have done their homework and they fit very well indeed.

Equipment used:

Tamiya Liquid Cement, cyanoacrylate glue, 1200, 2000-grit sandpaper, Tamiya white putty, Tamiya Polishing Compound, Tamiya photo-etched wire, Micro Kristal Klear, Micro-Sol decal-softener, X-Acto blades

Availability;

Tabu Decals; www.hiroboy.com www.grandprixmodels.com

Hobby Design also supplies fasteners of the rear engine cover. They consist of two parts which require bending to shape and once in place, they are superb! The minimal engine looks okay here.

The photo-etched ventilation grilles contribute much to the overall realism. Note the red-painted towing eye.

markings are magnificent; “theTabu’s colours are accurate and the transparent carrier-film around the decals is almost nonexistent...

”

One can appreciate here the carbon on the louvres (as well as the diffuser). Also note the figurative lights decals.

The fuel filler is made of two photo-etched parts. The small red handle is made of stretched plastic.

Well worth the effort; the Red Bull decals are a little fiddly to fit, but the car looks pretty awesome once complete

26 October 2015 TMMI 240

p 22-26 McLaren 240MN.indd 26

28/08/2015 16:52

1:72 NAKAJIMA B5N2 ‘KATE’ & GRUMMAN WILDCAT™ F4F-4

A50169

Nakajima B5N2 ‘Kate’ & Grumman Wildcat™ F4F-4

Dogfight Doubles Gift Set

4th June 1942, over the skies of the Pacific Island Midway, the course of World War Two in the Pacific changed entirely. At 0630 hrs. Nakajima B5N “Kate” torpedo planes bombed the island installations, but only managed to inflict slight damage thanks to the U.S Marine Corps Grumman “Wildcat” fighters, which suffered disastrous losses in defence of the island’s facilities.

Nakajima: Length=143 Width=216mm Pcs=107 Wildcat™: Length=122 Width=160mm Pcs=58 Official Product

Airfix.com

and all good retail stockists Find us on Facebook Badge

CMYK / .eps

@Airfix 3505AX_AMW_Airfix_October-A50169_Ad-4.indd 1

Join the Official Airfix Club

For schools and all youth organisations

Secondary School History Project

humbrol.com

05/08/2015 15:51

KIT PREVIEW TAMIYA 1:700 JAPANESE LIGHT CRUISER MOGAMI ● KIT NO.31359

MOGAMI'S MANY FORMS Tamiya's 1:700 IJN Mogami Light Cruiser is made up from sprues of varying vintages but the end result is a potentially excellent replica of the Battle of Midway veteran

T

amiya originally offered Mogami in 'Aircraft Carrying Cruiser' form, around 2002. The 'new' kit is configured with all five turrets and therefore depicts the vessel before she was badly damaged on June 6th 1942 during the Battle of Midway. Following this damage, Mogami was sent back to Japan for a major refit which involved the removal of her damaged fourth and fifth turrets and the installation of an aircraft handling area on the extended aft deck, so the current release is a backdating of the moulds to depict her in pre-damage spec. As indicated on the box, the kit is a waterline production and as such, comes only with a hull split along the waterline as she'd appear in calm waters. A rectangular

28 October 2015 TMMI 240

p 28 Mogami Pre 240MN.indd 28

metal weight is included for installation within the hull to add a little extra presence to the model. The main structure is taken from the older release, but from the deck upwards we have new parts to reflect her original appearance. Even though the model is largely made up from older sprues, the detail is excellent and with a little attention from photo-etched manufacturers plus some rigging – and maybe even a seascape setting – the kit will form an excellent replica of this fast and potent vessel. ● MN MODEL SPEC SCALE; . . . . . . . . . . . . . . . . . . . . . 1:700 MATERIALS: . . . . . . . . . . . . . . . IM, PC, WS KIT NUMBER; . . . . . . . . . . . . . . 31359 AVAILABILITY; Tamiya models are widely available from good model shops. Imported and distributed by The Hobby Company Limited www.hobbyco.net

Tamiya’s ‘new’ Mogami utilises parts from older releases but the overall effect is impressive, as we can see in the main photograph above.

28/08/2015 16:53

eduard

FULL-BUILD: WORLD WAR TWO DIORAMA TAMIYA 1:35 FRENCH MEDIUM TANK SOMUA S35 ● KIT NO.35344

STOPPING , L E U F R O F F F O

Z E 'CH LÉON'! not built one, Frédéric Dreister has iya he associated m but two SOMUA S-35 Ta"France 1940"... on a typical diorama

30 October 2015 TMMI 240

p 30-40 SomuaDio 240MN.indd 30

28/08/2015 16:55

I

t's 5:30am, on a spring day, 1940. A deafening roar awakes Maurice Leon, owner of 'Garage Leon'. So, it must be true, the Germans are coming! The idea of his village being invaded is such an abomination, Maurice hardly dares to look through the shutters. But in the darkness of early morning, he just about sees a Tricoleur on a vehicle, which stops right outside the gas pump. Maurice rushes down to the ground floor, opens the big metal door to his garage and comes face to face with a young lieutenant who throws him a smile; “good morning to you sir!” The survivors of a squadron from the 13th Dragoons, returning from the front, had stopped in the main street of the village, providing an opportunity for the crews to enjoy a few minutes of rest, perhaps to gather some provisions and refuel from the pump at the corner. All this before returning to the ever-approaching front and to try and slow the German panzers.

TOP SOMUA

It was with enthusiasm that I welcomed the Editor's offer to build not one, but two Somua S35s, hot off the moulds from Tamiya. It had been almost twenty years since I had assembled the only S35 in injection plastic which then existed; the Heller kit. So it is with undisguised joy that I welcomed this new release from Tamiya. The model

is simply splendid, with a fine casting effect on the hull and turret that is clear to see upon opening the box. All the parts are impeccably moulded in the usual sandy-beige plastic used by Tamiya, with an excellent level of detail on the exterior. The assembly is, as always with Tamiya, a real breeze, to the extent that the kit is suitable for both beginners and more experienced modellers alike. Even the injection-moulded track links are easy to assemble; simply snap them together and the two sides can be assembled in less than an hour! Tamiya had the good idea to depict the whole of the running gear, even if it is largely hidden under the protective skirts on the completed model. This will allow those who wish to represent a machine in the maintenance shop, or perhaps destroyed by the roadside. Similarly, most of the hatches giving access to the engine are separately moulded, so it will be easy to use detail sets when they have been developed by aftermarket producers. The hatches of the fighting compartment are provided separately as well. I'd like to add that the choice of markings is very interesting, with three tanks operating from the 4th Cuirassiers Regiment and 13th and 18th Regiments of Dragoons, the latter two also covered as colour-profiles in the Trackstory book No.11 from Editions Barbotin, dedicated to S35.

U

TMMI 240 October 2015

p 30-40 SomuaDio 240MN.indd 31

31

28/08/2015 16:55

FULL-BUILD: WORLD WAR TWO DIORAMA TAMIYA 1:35 FRENCH MEDIUM TANK SOMUA S35 ● KIT NO.35344

ADDITIONS V MINOR As usual with Tamiya

kits, not much is needed to improve the model, so I'll refer to them as 'supplements' instead of 'improvements'. I made a small slit between the two vision blocks of the driver and radio operator. On the turret, I just worked the plastic a little to highlight the hinge pins of the rear hatch and the 47mm gun, visible on the right. The other additions came from a new set dedicated to Tamiya's Somua S-35, graciously provided by Azimut. In fact, it was this set of resin parts that inspired me to create the diorama seen here. It includes a small section of the engine compartment, specifically the top of the water tanks for the cooling system and petrol tanks, hence the idea of a refuelling halt. The other resin parts of the Azimut set are primarily to detail inside the turret which unfortunately remains very visible upon completion kit (at least on the opened-up tank 'No.02'). Azimut's resin armament system for the kit is very comprehensive and is accompanied by the turret

rotation system as well as two vision blocks for the turret sides. Outside, Azimut provides small lifting hooks of the upper turret and a new blackout headlight that is more detailed than the Tamiya part. The sliding lock inside the main side door on the tank's left flank is also provided, should you wish to present this door open (an interior would, of course, be needed for this). At this stage, to fully understand the parts offered by Azimut, watching the DVD offered by Editions du Barbotin was very informative. It contains original and highly detailed information on the real vehicle, with a full description of the maintenance procedures of the tank. Wanting to represent two S35s who survived a fight with the oncoming panzers, I reproduced impacts on the body and the turret with a heating tool used in the hobby of Pyrography (wood-burning) and I also used this to deform the storage boxes installed on the right side of tank No.02 and tweaked some areas of the mudguards.

U

Azimut’s resin armament “system for the kit is very comprehensive... ”

Essential reading; Trackstory No.11 on the Somua S35 provides a ton of useful references for building Tamiya’s 2015 kit

Tamiya has taken particular care to reproduce the chassis, although it will remain hidden behind the wheel skirts and side shields thereafter.

Tamiya turret was supplemented by elements of the Azimuth set that reproduce the weapon system in great detail. Before finally closing up the turret, the Azimut parts were painted and weathered.

32 October 2015 TMMI 240

p 30-40 SomuaDio 240MN.indd 32

28/08/2015 16:55

Azimut also includes in its set the area for filling the water-tanks and two petrol tanks, located behind the right rear hatch of the turret. This is what inspired the author to make the diorama.

Many impacts of enemy fire were reproduced on the armour of the two S35s, especially on the front and the turret.

The location was drilled out. The hatch is also provided by Azimut; it will be installed after painting.

There are different types of coupling on both tanks (Tamiya offers a choice) and towing chains were only fitted on one of the two.

Tank ‘02’ is recognizable as a command vehicle by its two radio antennae, which will be installed at the very end of painting. It also has side casings, absent on ‘45’.

Mini Review... SWEET 1:144 TYPE 96 CARRIER FIGHTER (A5M4) ITEM no;14-D038 www.sweet144model.com

Recently released from Japanese manufacturer ‘Sweet’ is this exquisite rendition of Saburo Sakai’s A5M4 in its attractive natural metal and red colour scheme, with black cowling. The tiny kit is very finely moulded with separate engine, fuselage in two halves and a super-delicate propeller. Full decalling (with data stencils) plus painting guide are provided.

TMMI 240 October 2015

p 30-40 SomuaDio 240MN.indd 33

33

28/08/2015 16:57

FULL-BUILD: WORLD WAR TWO DIORAMA TAMIYA 1:35 FRENCH MEDIUM TANK SOMUA S35 ● KIT NO.35344

A

C

B

D

A. The enhanced turret parts in the Azimut set require some putty to hide the joint between the lower resin casting and the upper plastic moulding. The small APX-4 cupola installed on the turret was supplemented with small hooks from the Azimut set and six small holes were drilled in its upper half. B. The side lockers installed on the '02' were set up following the instructions. The first was deformed by heat from a pyrography wood-burning tool.

E

F

C. Besides the shell impacts, a vision slot was added between the two vision blocks. The blackout light is a part of the Azimut set and is better detailed than the Tamiya part. D. The exhaust pipes of the big V8 that propels the Somua are particularly realistic. They will be glued permanently after having being weathered individually. E. The tarpaulin is missing on '02' but the author has represented one of its retaining straps with Tamiya masking tape. Metal chains included in the kit perfectly complement the rear of the model.

G

H

F. The tools were installed according to the recommendations of the leaflet. As there was no strap, the author represented them with masking tape. G. On the right side of the turrets, the author reproduced the barrel axis and some shell impacts. H. The many impacts were made using the wood-burner to suggest the hard fighting of Spring 1940.

34 October 2015 TMMI 240

p 30-40 SomuaDio 240MN.indd 34

28/08/2015 16:56

TMMI 240 October 2015

p 30-40 SomuaDio 240MN.indd 35

35

28/08/2015 16:56

FULL-BUILD: WORLD WAR TWO DIORAMA TAMIYA 1:35 FRENCH MEDIUM TANK SOMUA S35 ● KIT NO.35344

The exhaust pipes are treated separately using Tamiya acrylics in various brown, red and orange tones.

Tamiya masking tape was used to reproduce the typical camouflage patterns seen on Somuas during the campaign in France.

The patination work included scuffing The straps of the boxes were painted The wooden parts, metal straps and other surface wear. in a leather colour obtained by mixing and tools were painted and then Tamiya acrylics. ‘weathered in’.

V OVERPAINTING For the camouflage patterns,

I complied with the colour guide included by Tamiya, which seemed accurate. Trackstory book No.11 describes very precisely the camouflage worn by each series of vehicles based on its production on Somua assembly lines. There are at least six different patterns that were adopted, according to the registrations of each tank. As for colours, some picky-minded folk might find fault with the colour guide in the kit, but I don't get too worked up over an alleged actual hue. Anyway, with the effects of patination and colour-washes, the basic shade undergoes many changes. After spraying Tamiya grey primer (aerosol) on both models, I took advantage of the drying time to paint and weather-up the inside of No.02's turret, before finally closing it up. I used Tamiya masking tape to delineate each colour and attain very precise curves. For the turret of tank No.45, I opted to paint by brush because the contours were too tortuous for masking. Each colour was defined by a black painted 'hem' for which I used a black 'Posca' felt-tipped

gouache pen, equipped with a fine tip. I then started ageing the pair of S35s by applying simulated paint damage. For this, I first applied small spots of colours that were close in tone to those of camouflage, but slightly lighter. I then touched in every spot with a rusty-brown colour. The result seemed enough to me, so I didn't add the usual step of micro-painting. I then applied a gloss coat over all parts, before applying the decals. These came out of the box, but I modified the registration and tank numbers to personalise my models a bit. A second layer of gloss varnish was then applied over the decals, to seal them permanently. Several Tamiya Panel Line Accent Colors were applied, and after about ten minutes, I gently rubbed off the excess by wiping with a soft cloth, dampened with enamel thinner. Then, with the use of a sponge dampened with thinner Tamiya, I reproduced rain streaks on the sides of the both tanks' hulls and turrets. After having dried overnight, I sprayed a generous coat of matt varnish over both models'

After applying a gloss coat, the decals were applied. The registration number was amended by the author to customise the models, using numbers from the two decal sheets.

The turret numbers were also modified by the author. View of the two Somuas completely painted. Note the black 'hems' defining the colour boundaries, drawn with a black gouache felt-pen from the Posca brand.

Tamiya’s Panel Line Accent Color were applied generously throughout the model, here on ‘45’.

36 October 2015 TMMI 240

p 30-40 SomuaDio 240MN.indd 36

28/08/2015 16:57

After ten minutes of drying, the surplus was gently wiped off with a soft cloth dampened with enamel thinner. With a foam brush, the author then created various vertical streaks on the hull.

surfaces to protect all this work and to re-instate a more natural-looking finish. I finished up by creating a metallic patina to on the relevant parts using silver and graphite coloured pencils by Faber-Castell. These work very well on the flat paint and allow the modeller to highlight the impact of shells, corners of the body and fenders, plus the metal parts of tools and weapons. Finally, I used Mig Productions' weathering pigments to add a dusty/ muddy covering on the underbody and caterpillars.

Colour-washes created a tired appearance in the paint, while accentuating the many raised details. Note that at this stage the exhaust pipes are not yet installed.

The tracks, first painted dark brown, were gently drybrushed with X-10 Gunmetal and X-11 Chrome Silver for the areas in contact with the ground. The headlight also received a layer of X-11.

With silver coloured Faber-Castell pencil, the author highlighted the edges of the tank, plus its shell impacts.

The running gear was treated with pigments from Mig Productions; mainly Dark Mud but also small touches of Gulf War Sand.

U

Faber-Castell pencils (silver and graphite), used alternately or superimposed, enabled the author to reproduce the surface where the worn metal appeared, like here on the fender.

Both S35 were completed by permanently installing the last parts that had been painted separately, such as the exhaust pipes and both radio antennae on ‘02’, a command tank. Only a few S35 were equipped as such.

TMMI 240 October 2015

p 30-40 SomuaDio 240MN.indd 37

37

28/08/2015 16:57

FULL-BUILD: WORLD WAR TWO DIORAMA TAMIYA 1:35 FRENCH MEDIUM TANK SOMUA S35 ● KIT NO.35344

A

D

B

E

C

F

G

A. The exhausts were treated by depositing Mig Productions' rust coloured pigments, before fixing them on the finished models. The author blackened the outlets with black pigments. B. The chains were painted brown and covered with more further colour-washes before being installed on '02'. C. The sprocket teeth were enhanced with a steel colour, drybrushed on. The underbody was treated with pigments in order to recreate a dusty appearance. D. The large turret numbers of both tanks consist of unit markings from the kit's decals. For the roundel, we suggest you either make a hole before application or cement the lifting hook over the top of the decal. The author preferred the first option and only had to hand-paint a few touch-ups. E. The tarpaulin is superb, worthy of the best productions in resin. The author enhanced the straps with masking tape for added realism. F. The metal parts of the tools were weathered by rubbing on graphite Faber-Castell pencils before buffing up with a polishing disc mounted in a Dremel. We can see here the refuelling point and water fillers from Azimut's detail set. G. The shell impacts, first painted black, were then treated with a rust-brown wash before being given a metallic lustre with a silver coloured-pencil.

DIORAMA LÉON V CHEZ The diorama consists of a

wooden base onto which I glued Tamiya's Diorama Material Sheet 'Cobblestones' Type A. Mr Léon's garage was constructed from foamboard and again I covered it with Tamiya's Diorama Material Sheet, this time 'Brickwork'. These Tamiya products have a slight relief pattern and can be cut very easily. The raised parts such as concrete were made from plastic card, like the zinc roof, eves and gutter, concrete ledges, chimneys, the door of the workshop and the front of the garage. The large raised letters are stickers made from cork. After painting, I added some advertisements found on the internet, printed off onto photo-paper; the 'BYRRH' wall-advert was created using airbrush stencils. The pathways were made from thin foamboard onto which I pasted sections of Tamiya's Diorama Material Sheet 'Cobblestones' Type B. The fuel pump is by ADV (provided by Azimut),

The panels of the foamboard building were covered with Tamiya brickwork sheeting.

The stage is set: two Somua S35s make a stop in a village! The building in the background is just being test-fitted here (no glue), with several pieces of foam board. The letters are from self-adhesive cork. The author could have stopped there and staged yet another urban combat scenario, but Azimut's set inspired another idea...

slightly altered after looking at pictures found on the internet. The figurines that animate the scene come from the two Somua kits (one was

been substantially altered), the MiniArt range (tanker standing) and an MK-35 figure, converted into pump attendant.

The décor is complete and ready to receive the models. The many components added to the foamboard base were mostly made of card and plastic profiles of different thicknesses and sections.

U

38 October 2015 TMMI 240

p 30-40 SomuaDio 240MN.indd 38

28/08/2015 16:56

H H. The paintwork has breathed life into the brick wall and the addition of advertisements ideally complement the diorama. The 'BYRRH' sign was painted with two stencils on a red background. The 'Azur' and 'Kervoline' enamel plates come from a printout of vintage advertisements found on the 'net. I. The concrete parts, shutters and lamp were all made of card and plastic sections. Large letters are cork. J. The roof and the gutter were made with card and plastic profiles. K. The dust and dirt on the cobbles of the street and path were reproduced with Gulf War Sand pigments. The excess was removed with a fingertip. L. The façade is reminiscent of a garage from the '30s/'40s. The glass parts of the workshop door were represented with a piece of an old notebook cover. M. The ADV gas pump with its beautiful decals is ideal for this scenario. Note the oil stains on the cement and the can on the floor. The figure, a production by the French artisan maker 'MK35' was converted by the author into a gas station attendant. N. On the left of the photo we can see the painted and patinated brickwork; on the right we see the plain Tamiya brickwork sheet as it comes. O. Again, the effects of a simple pigment powder application made by the author can be seen on the Tamiya Cobblestone Diorama Material Sheet.

I

J

K

L

M

N

O

TMMI 240 October 2015

p 30-40 SomuaDio 240MN.indd 39

39

28/08/2015 16:58

FULL-BUILD: WORLD WAR TWO DIORAMA TAMIYA 1:35 FRENCH MEDIUM TANK SOMUA S35 ● KIT NO.35344

WALK! V CAKE Tamiya, thank you. This

is another stunning little model that I had a lot of fun building – times two! The refuelling scenario is slightly unusual and offers an attractive way of presenting the two tanks and it was enjoyable to construct, using Tamiya's Diorama Sheets. I wish you a fun time with your Somua S35! I'd like to thank Azimut who sent us samples of the necessary resin parts for detailing the two S-35s and I also want to thank the publishers of Editions Barbotin who kindly sent us Trackstory No.11 and the DVD 'Technitracks No.4', which is both fascinating and very informative. ●

Tank '45' with the ace of diamonds on the sides of the turret sports a camouflage scheme using the same shades as '02' except the blue on top of the turret. On the latter, the design is much more complex. The camouflage of French tanks is very rich and diverse, allowing you to customise each model.

MODELSPEC TAMIYA 1:35 FRENCH MEDIUM TANK SOMUA S35 KIT NO.35344

Materials:

Injection-moulded polystyrene, polycaps, metal chain, waterslide decals

Paints used:

Tamiya Sprays; Light Grey Primer, TS-13 Clear Tamiya Acrylics; XF-1 Flat Black, XF-2 Flat White, XF-8 Flat Blue, XF-10 Brown , XF-15 Flat Flesh, XF-21 Sky, XF-23 Light Blue, XF-52 Flat Earth, XF-60 Dark Yellow, XF-64 Red Brown, X-6 Orange, X-10 Gunmetal, X-11 Chrome Silver, X-22 Clear Tamiya Panel Line Accent Color; Black, Brown Humbrol; Matt Cote varnish Posca; black gouache felt-marker Mig Productions pigments; P031 Vietnam Earth (rust on the exhaust pipes) P033 + P037 European Earth and Gulf War Sand (for underbody and caterpillars) AK Interactive; Black AK039 (for tailpipes)

Accessories used:

Azimut; 1:35 Detail set for S35 (35399) ADV; 1:35 fuel pump (35420) MiniArt: French tank crew 1940 (35105) MK35: Mechanic (FA096) Tamiya's Diorama Material Sheet Cobblestones/ Stone Paving A (87165), Cobblestones/Stone Paving B (87166) Cobblestones/Stone Paving C (87167) Brickwork (87168)

Availability;

Tamiya model kits, paints and materials are widely available from good model shops. UK import and distribution by The Hobby Company Limited; www.hobbyco.net MiniArt, Mig Productions, AK Interactive; www.creativemodels.co.uk MK35; www.mk35.com/en/ Azimut ADV; www.azimutproductions.com

40 October 2015 TMMI 240

p 30-40 SomuaDio 240MN.indd 40

28/08/2015 16:57

Mirage mon amour!

3D Model

3D Model

Mirage IIIC 1360

Cant Z.506 Airone

N°2505

3D Model

model kit modèle réduit

1:72

1:32

scale èchelle

Super decals sheet for 6 versions

3906 Scania R730 V8 Streamline “Silver Griffin” 1:24

Distribuito da Italeri S.p.A. sub licenziatario ufficiale Aeronautica Militare

Super Decal Sheet for 2 versions Chromed adhesive Catalogue 2015

Ask your local distributor or contact: Italeri S.p.A.- via Pradazzo, 6/b 40012 - Calderara di Reno - Bologna - Italy - Phone +39 051 31 75 211 - email: [email protected]

New Releases

Please turn to page 60 for the

The latest photo-etched sets, resin parts, figures and accessories to enhance your scale models...

What’s in the box?

AD; ACETATE DIALS, CC; CAST CERAMIC (PLASTER), CMA; CAST METAL ALLOY, CP; CHROMED PARTS, CPS; CLEAR PLASTIC SHEET, DT; DRY TRANSFER (DECALS), EM: ELECTRIC MOTOR EPS; EXTRUDED PLASTIC SE ALLOY, MR; METAL ROD, MW; METAL WIRE, MT; METAL TUBING, NM; NYLON MESH, PE; PHOTO ETCH, PEBM; PHOTO-ETCHED BADGES/MIRRORS, PCM; PRE-CUT MASKS, PMP; PRE-ASSEMBLED METAL PARTS), PS;

VALLEJO, SPAIN

www.creativemodels.co.uk www.acrylicosvallejo.com Vallejo Acrylics from Barcelona have created a new range of metallic paints that use a water-based solvent, pre-thinned for spraying and entitled 'Acrylic Metal Color Airbrush Colors'. At the time of writing there were nineteen shades in the range, listed below. The paints employ the latest generation of metallic pigments which offer a remarkably bright lustre and being water-based, they feature low-toxicity (although a mask should always be worn when spraying, plus plenty of ventilation in the workspace). We will be trying out these paints soon in TMMI as they appear to offer a very efficient and realistic way of creating a metallic finish without the need for a layer of primer, as lacquer-based metallics usually do. MN ALUMINIUM (701) DURALUMIN (702) DARK ALUMINIUM (703) PALE BURNT METAL (704) WHITE ALUMINIUM (706) CHROME (707) COPPER (710) MAGNESIUM (711) STEEL (712) JET EXHAUST (713) SEMI-MATT ALUMINIUM (716) DULL ALUMINIUM (717) GUNMETAL GREY (720) BURNT IRON (721) EXHAUST MANIFOLD (723) SILVER (724) GOLD (725) GLOSS METAL VARNISH (657)

VALLEJO, SPAIN

www.creativemodels.co.uk www.acrylicosvallejo.com Vallejo Acrylics 'Air War' product line comprises packs of eight, 17ml bottles of acrylic paints, accurately colour matched to their subjects. New to the range are three sets for Luftwaffe aircraft, for the pre-war to 1941 and 1941 to war's end periods, plus a set for maritime and tropical camouflage colours. The colours are drawn from Vallejo's excellent 'Model Air' range and are all RLM-matched for accuracy. These paints are mixed for airbrush application but we have found that they hand-paint very well too. Also new is a set of eight shades to re-create wood on models, from new timber to old, worn and stained wood. Finally, the 'Game Air Face Painting' set brings us eight colours for the creation of convincing flesh-tones. These are ideal for large-scale figures, which are better when airbrushed as they have larger surface areas than 1:35 faces and hands. MN • LUFTWAFFE MARITIME & TROPICAL COLORS (ART.71164) • LUFTWAFFE COLORS PRE-WAR TO 1941 (ART.71165) • LUFTWAFFE COLORS 1941 TO END-WAR (ART.71166) • USAF COLORS 'GRAY SCHEMES' FROM '70S TO PRESENT (ART.71156) • US NAVY & USMC COLORS FROM '70S TO PRESENT (ART.71155) • OLD & NEW WOOD EFFECTS (71.187) • GAME AIR FACE PAINTING (72.865)

42 October 2015 TMMI 240

p 42-44 NR Access 240MN.indd 42

28/08/2015 16:59

Accessories

EXTRUDED PLASTIC SECTION, F; FABRIC, IM; INJECTION MOULDED (PLASTIC), ITL; INDIVIDUAL TRACK LINKS, LCC; LASER CUT CARD, LLT; LINK AND LENGTH TRACKS, MC; METAL CHAIN, MMA; MACHINED METAL ED METAL PARTS), PS; PAPER STRIP, R; RESIN, SVT; SOFT VINYL TYRES (OR TUBING), VF; VINYL FIGURES, VFP; VACUUM FORMED (PLASTIC), WC; WOVEN CORD, WD; WATERSLIDE (DECALS), WS; WOODEN STRIP

ULTIMATE MODELLING PRODUCTS, UK

www.umpretail.com UMP offer a range of original and useful colourwashes that differ significantly from the more frequently seen enamel and acrylic-based washes in that they appear to be water-based with a pigment in suspension which can be worked around the model with a damp paint brush until the desired effect is achieved. New to the range is 'Winter' which has been formulated to create white-wash effects on armoured vehicles and equipment. Also new is 'Dark Dirt' which is a useful all-round deep colour-wash with an improved, non-toxic formula. Excellent products with plenty of potential. MN WINTER WEATHERING WASH (UMP006) DARK DIRT WEATHERING WASH (UMP005)

TMMI 2340 October 2015

p 42-44 NR Access 240MN.indd 43

43

28/08/2015 17:00

New Releases

Please turn to page 60 for the

What’s in the box?

AD; ACETATE DIALS, CC; CAST CERAMIC (PLASTER), CMA; CAST METAL ALLOY, CP; CHROMED PARTS, CPS; CLEAR PLASTIC SHEET, DT; DRY TRANSFER (DECALS), EM: ELECTRIC MOTOR EPS; EXTRUDED PLASTIC SECTION, F; FABRIC, IM; INJECTION MOULDED (PLASTIC), ITL; INDIVIDUAL TRACK LINKS, LCC; LASER CUT CARD, LLT; LINK AND LENGTH TRACKS, MC; METAL CHAIN, MMA; MACHINED METAL ALLOY, MR; METAL ROD, MW; METAL WIRE, MT; METAL TUBING, NM; NYLON MESH, PE; PHOTO ETCH, PEBM; PHOTO-ETCHED BADGES/MIRRORS, PCM; PRE-CUT MASKS, PMP; PRE-ASSEMBLED METAL PARTS), PS; PAPER STRIP, R; RESIN, SVT; SOFT VINYL TYRES (OR TUBING), VF; VINYL FIGURES, VFP; VACUUM FORMED (PLASTIC), WC; WOVEN CORD, WD; WATERSLIDE (DECALS), WS; WOODEN STRIP

AMMO OF MIG JIMENEZ, SPAIN

www.migjimenez.com Mig Jimenez is a key figure in the revitalisation of modelling techniques from the late 1990s to the current day. His newest company, 'AMMO of Mig Jimenez' now boasts a sizeable line-up of paints, weathering materials and more; the latest are 'Cockpit Sets' which each comprise a base colour in acrylic paint (17ml) plus two, enamel-paint based colour-washes (35ml x2). One of the washes is a general shade to enhance the base colour, the other is for localised washes that will enhance and accentuate moulded-in detail in the traditional manner. In the case of Early Luftwaffe and WWII British cockpits, the second washes are replaced with 35ml pots of earth-toned pigments for the cockpit floors etc. Very handy indeed! MN EARLY LUFTWAFFE COCKPITS 1 (A.MIG 7430) LATE LUFTWAFFE COCKPITS 2 (A.MIG 7431) WWII BRITISH COCKPITS 3 (A.MIG 7432) WWII USA COCKPITS (A.MIG 7433) WWII USA INTERIOR (A.MIG 7434) MODERN RUSSIAN COCKPITS (A.MIG 7435) US MODERN COCKPITS (A.MIG 7436)

44 October 2015 TMMI 240

p 42-44 NR Access 240MN.indd 44

28/08/2015 16:59

p 45 ADs Collated 240.indd 8

28/08/2015 16:40

FULL-BUILD: MILITARY VEHICLE KINETIC 1:35 RG31 MK.3 MRAP ● KIT NO.61012

DESER MONS

46 October 2015 TMMI 240

p 46-52 RG31 MRAP 240MN.indd 46

28/08/2015 17:03

ERT NSTER

lek Lukasz Orczyc-Musia-31 builds Kinetic's 1:35 RG s MRAP Nyala Bantamweight clastail sets and adds some extra de e to bring the vehicle to lif

MRAP meets IED. Even the best designed vehicles are no match for concealed heavy ordnance, but note how the hull is still intact, protecting the crew. Photo; Wikimedia Commons

T

he RG31 is manufactured by Land Systems OMC of South Africa. As with the other vehicles in the MRAP (Mine Resistant Ambush Protected) family it features a V-shaped, all-steel, welded armour monocoque hull and high suspension, typical for South African mine protected vehicles, providing excellent small-arms and mine blast protection. It is based on Mamba APC and can accommodate a crew of eight to ten soldiers and crew (including the driver). Dismounting is provided via a large rear door and two front doors (depending on the model). It can be modified for armoured personnel carrier, command and control, ambulance, scout vehicle, or other applications. The engine, transmission and fuel cell were situated inside the armoured hull for maximum protection. On some vehicles, a remote weapons-station was fitted to the top of the vehicle, further improving the crew’s ability to return fire while being protected. For route clearance operations, spare tyres were normally removed and additional armour added to protect air tanks and fuel lines. Prior to its debut in the Unites States Army, the RG-31 had been used extensively by NATO and UN Forces in various peacekeeping operations throughout the late 1990s and early 2000s the same as non-governmental organisations which requiring a vehicle with a non-aggressive appearance to protect their personnel against land mines. The main operators of RG-31 are United States, Canada, Spain, United Arab Emirates but some small amounts are used in other countries worldwide. The RG-31 saw the combat in Afghanistan and Iraq mainly, but it serves in Balkans and Lebanon. TMMI 240 October 2015

p 46-52 RG31 MRAP 240MN.indd 47

U

47

28/08/2015 17:03

FULL-BUILD: MILITARY VEHICLE KINETIC 1:35 RG31 MK.3 MRAP ● KIT NO.61012

V KIT I have to admit that I was

a bit disappointed upon opening box. I had read a lot of reviews where the authors 'clap their hands' a lot but perhaps they did not look carefully at the parts. I am not saying the kit is bad, but here and there we see that level of detail and finish is below current standards. Some of the parts need a lot of patience and work to look good, but in the end it is possible to make a good-looking model. Despite of the occasional variable quality of the RG-31’s parts, this kit is a perfect addition to an MRAP collection. It is one of the smallest vehicles in this family but it is 'must have' subject. Without doubt it is a unique subject; no other manufacturer makes an RG-31 as a plastic kit. Hopefully there will be more interesting colour schemes and markings because of its growing usage. The model comprises approximately 203 parts in sand-colour plastic, plus clear parts, twenty black vinyl parts and a photo-etched fret. Markings are provided for three vehicles. The box provides also two additional sets; Masterbox figures 'US Soldiers Check Point Iraq' and J’s Work 'Check Point Road Block Equipment Set'. The RG-31's name of Nyala (a spiral-horned antelope from southern Africa) is quite appropriate as the vehicle has plenty of extended antennae, but to make it more interesting and eye-catching some additional parts proved necessary. So, after the searching in the model shops I decide to add some appealing elements, which I have listed in the 'Modelspec' section.

The real windows on MRAPs are tinted green. They are not usually as dark as this, but here the author decided to make them less see-through as the interior was too basic to show, plus the green panes also visually break-up the sandy/dusty look of the vehicle's exterior.

The PE elements were really small and to bend them properly, good tools were needed. With the perfect ‘RPToolz Bender’ I did my work with no stress.

Overall view of the 'ready to paint' model. The kit was upgraded with five antennae, resin on the back and metal on the front.

The author considered using DEF resin wheels to replace the originals but chose not to buy them. They are excellent, but Kinetic's wheels are quite good and it was not necessary to change them.

BUILDING

The main building process followed the instruction leaflet, but in some places I used replacement parts. The most important and visible is the resin mine plough from Legend Productions. It is nicely cast but in comparison with pictures of real ones I noticed that some details are missing. It is not too hard to make

The details of the mine roller are clearly visible. Note the IED device.

48 October 2015 TMMI 240

p 46-52 RG31 MRAP 240MN.indd 48

28/08/2015 17:03

them, so just a couple minutes were needed to upgrade the assembly. The front of the vehicle was enhanced with an anti-IED device build from PE parts. The turret's armour was also added; a typical field modification built with materials available in the repair workshops. The kit is equipped with a interior section. It provides the main features plus some details, but they are invisible when all doors and hatches are closed. Otherwise, a Legend Productions interior set (LF1278) will be needed.

PAINTING

The kit was painted in a 'colour gradient' technique, ie; from the darkest shade of paint on the bottom, medium on the main areas and the lighter on the top. It builds up a nice-looking contrast, especially when the small details are painted with a brush to contrast the main colours, which have been sprayed on. At the start, it looks a little strange but after a colour-wash application the big differences between colours disappear. The window panes were airbrushed with AK Interactive's transparent paint. I know that here they appear to have a quite an intense shade but it breaks up the monotonous, sandy look of the whole vehicle. The details were painted by hand; for the wheels I used Lifecolor's 'Black Rubber' shade (CS27).

All of the components were undercoated with black primer.

The gradient technique goes from dark tones at the bottom edges of the model, medium tones on the side areas to light tones on the top. It is the author's version of 'colour modulation'!

The most fun part of the painting stage was to use a normal paint brush and 'colorize' all of the kit’s details.

The author always paints his wheels in different colours and configurations – here you can see three rubber shades. Note the finish of the rims.

U

A mixture of AK122 and Ivory was used to paint the details and edges. It lightened-up the whole kit and even after a colour-wash application, is still visible.

p 46-52 RG31 MRAP 240MN.indd 49

28/08/2015 17:03

FULL-BUILD: MILITARY VEHICLE KINETIC 1:35 RG31 MK.3 MRAP ● KIT NO.61012

V DECALS After the paint had been

applied and dried, I started the decal application. Kinetic includes a small decal sheet with three different machines: RG-31 Mk.3 '278', unknown US unit, Iraq, 2006 (overall sand), RG-31 Mk.3, '522', USMC (overall sand) and RG-31 Mk.3, UNIFIL, Lebanon, 2007 (white). As you would expect, their quality is perfect but some of them are unfinished. Maybe the designer forgot to add some lines and letters? I used the set from the box plus some markings from Echelon's set D356166 'RG-31s in Afghanistan'. They include vehicles with 'Transformers' names. Because I like to change my decals a little, they were modified – I replaced the letters in the vehicle’s name from 'Blackout' to 'Outback'.

Before the decals were applied, the author airbrushed a layer of gloss varnish. Let’s go and play with oil paints! Mainly yellow tones were used to change the shades on the horizontal surfaces only. Before that the author applied 'Wash for DAK vehicles'. For dark coloured parts he used Dark Brown wash, both from AK.

The Transformer name and logo are the most recognizable parts of the vehicle’s individual look. Set and Sol liquids helped in sticker application.

WEATHERING

A thin coat of gloss varnish was applied to cover the decals and prepare the surfaces for a colour-wash application. For this purpose I used 'Wash for DAK Vehicles' from AK Interactive, further diluted with white spirit. The next step was oil paint application – I used light colours to highlight the horizontal surfaces, especially on the bonnet and roof. Small amounts of the paints were applied over the whole model and as a result I attained some interesting

Mini Review... TETRA MODEL WORKS 1:32 WW2 LUFTWAFFE SEATBELTS SET ITEM no.AA32005, AA32006 www.luckymodel.com

Tetra Model Works of Korea have some new detail sets on release, including some extremely refined aircraft seatbelt sets. For Luftwaffe subjects, Tetra offer packs comprising laser-cut straps (enough for two cockpits, plus a spare strap) from finely textured material; realistic printed stitching will be found on the webbing. The buckles and adjusters will be found on the photo-etched metal frets, or which two are provided. Superb!

50 October 2015 TMMI 240

p 46-52 RG31 MRAP 240MN.indd 50

28/08/2015 17:04

And finally the 'pre-dusting'. Here it was used as the most important part of the final weathering because pigments application was reduced to minimum (you can observe it on the wheels mainly). The pictures of the real vehicles show that they are up to 95% covered with dust and a muddy coat appears rarely, so here the author decide to do the same.

The main dusting was done with mix of three different pigments. As you can see, it was applied on the windows to tone down the green shade but it also appeared on the horizontal surfaces. It was fixed with white spirit.

The road wheels were dusted and then wiped with a fingertip to show the patterns of the tyre. Note the dust accumulated inside the spare wheel.

Here and there the author added some shiny metallic spots; 6B pencil was the best tool to create them. Some additional elements are visible here. The IED device cable was cut from soldering wire. It is soft and easy to form over the shapes of the kit.

The machine gun was polished with gunmetal powder but the finishing touches were done with the pencil. Take a look at the additional armour plates and the tarpaulin sun-shade, which was tied to the metal bars with thin wire.

Some of the pictures taken in Afghanistan show fuel stains on the right side of the vehicle. From the modeller’s point of view they are nice addition to the final appearance of the kit.

patination. Looking at the pictures from Iraq and Afghanistan, I noticed those vehicles exhibit no paint scratches, so there was no reason to make them. However, some of them are filthy, especially close to the fuel filler. As part of the weathering stages, a mix of 'dirty' pigments was applied (Industrial City Dirt, Beach Sand and Fresh Wood). A couple of touches of a 6B pencil plus some small fuel stains topped off the final appearance of the kit.

FINISHING TOUCHES

My method to add realistic extra elements to a model is to look through the photos which were taken by soldiers in the action as they always show the true look of the subject. Some things seen in the photos are really strange and surprising but they build the individual character of finished model. Look at the gallery pictures of my RG-31 and find them! I would like to thank Piotr Wypiór, Imad Bouantoun and Federico Collada. ●

Eduard's razor-wire, FCModeltips road signs, scratchbuild plastic emergency stretcher, transport strap, chain and some thin wires were all added by the author. Note the traces of the wipers.

TMMI 240 October 2015

p 46-52 RG31 MRAP 240MN.indd 51

51

28/08/2015 17:04

FULL-BUILD: MILITARY VEHICLE KINETIC 1:35 RG31 MK.3 MRAP ● KIT NO.61012

MODELSPEC KINETIC 1:35 RG31 MK.3 MRAP KIT NO.61012

Materials;

Injection-moulded sand-coloured and clear polystyrene, black vinyl, photo-etched brass, waterslide decals

Paints used;

Tamiya XF-59 Desert Yellow, XF-78 Wooden Deck Tan, AK Interactive Base Color AK122, Vallejo Model Color (various)

Vehicle detail sets used;

Legend SPARK Mine Roller Set for RG-31 (LF1279), ET Model Modern US Vehicle's Anti IED Device & Antennas (E35-140), RB-Model 2m antennae (35A02), Bronco LED Search Light Set C (AB3570), SKP RG-31 Mk.3 MRAP Lenses and Tail-lights (206), Echelon RG-31s in Afghanistan (D356166)

Other detail items used;

Eduard barbed wire, J’s Work road cone, FCModeltips road signs, RB Model chain, Evergreen plastic profiles, soldering wire, copper wire, piece of twine

Source:

Wings and Wheels Publications; RG-31 MRAP Mark 1 and Mark 3 In Detail Part One (Ralph Zwilling) G 033 (wwpbooks.com)

Availability:

Kinetic kits are available from; www.luckymodel.com

Above and below; the finished model, with all its aftermarket additions, looks rather splendid; the Stars and Stripes flag tops it all off perfectly.

(Vehicle history source; Wikipedia)

52 October 2015 TMMI 240

p 46-52 RG31 MRAP 240MN.indd 52

28/08/2015 17:04

MODELLING PROJECTS 41ST ARMORED INFANTRY REGIMENT CAMOUFLAGE

dIORAMA IDEAS...

MISTAKEN IDENTITY It was good camouflage in the Pacific theatre, but in Europe, it was just a little too close to the SS’s uniforms, meaning that the ‘two-piece herringbone twill camouflage jungle suit’ was rapidly withdrawn...

T

his photo of Private Joseph De Freitos from Yonkers, New York, was taken between the 26th and 30th of July, 1944 at the Pont Brocard crossing on the River Soulle in Lower Normandy. The soldier was from the 41st Armored Infantry Regiment of the 2nd US Armored Division and is seen heating tins of rations on an individual stove, placed on a window sill for convenience. He wears the camouflaged ‘two-piece herringbone twill camouflage jungle suit’, an effective design, but one that was quickly abandoned due to possible (deadly) confusion with the camouflaged uniforms worn by the Waffen SS. The fabric was printed with three shades of green, plus one shade of brown. Private De Freitos could be replicated in miniature using this image to replicate the correct pattern of camouflage, plus books and online sources to ascertain the correct colours. The figure and architectural background could be displayed on one of Oakwood’s superb wooden plinths, shown right. ● Where to buy; Oakwood bases; www.oakwood-studios.co.uk

54 October 2015 TMMI 240

p 54 DioramaIdeas 240MN.indd 54

28/08/2015 17:06

COLOURS

A d d re alit d i m e n s y a n d n ew i o n s to yo u r models with Ul t i m a te Weathe ring Wa sh

Ultimate Thinner & Cleaner Our Ultimate Thinner & Cleaner is specifically formulated to work with ALL brands of acrylic modellers paint. Our blended formula provides a fast drying, smooth finish every time. Weathering Wash Our weathering wash has been formulated with several key non-toxic ingredients to bring you a superior clay based wash to add detail and realism to your model. Modellers Sanders We have a full range of sanding solutions including normal modellers sanders, thinny sticks & thinny sponges for finer work plus exceptionanlly fine buffers for a completely smooth finish. Photo-Etch Placer Our photo-etch placer is a re-usable wax based positioning stick that will help to hold and place even the smallest piece of photo-etch or styrene.

email: [email protected]

www.umpretail.com

New Releases A selection of the latest full kits in plastic, resin, metal and more!

What’s in the box?

AD; ACETATE DIALS, CC; CAST CERAMIC (PLASTER), CMA; CAST METAL ALLOY, CP; CHROMED PARTS, CPS; CLEAR PLASTIC SHEET, DT; DRY TRANSFER (DECALS), EM: ELECTRIC MOTOR EPS; EXTRUDED PLASTIC SE ALLOY, MR; METAL ROD, MW; METAL WIRE, MT; METAL TUBING, NM; NYLON MESH, PE; PHOTO ETCH, PEBM; PHOTO-ETCHED BADGES/MIRRORS, PCM; PRE-CUT MASKS, PMP; PRE-ASSEMBLED METAL PARTS), PS;

ZVEZDA, RUSSIA

TERMINATOR RUSSIAN FIRE SUPPORT COMBAT VEHICLE www.hobbyco.net SCALE; 1:35 • MATERIALS; IM, WS • KIT NUMBER; 3636 The T-72-based ‘Terminator’ Russian Fire Support Combat Vehicle is a popular subject at the moment, with two new (and completely different) kits of it available in 1:35. Here, we have Zvezda’s offering, which is a complex production, with cleverly designed link-length tracks (separately moulded strips of guide horns) and masses of exterior detail. The futuristic and deadly-looking turret is a mouthwateringly complex affair with detail renditions of the twin guns and four missile launchers. MN

Great moulding quality, lots of detail and a mean-looking model will result Lots of parts mean a long build time, but that’s good!

BRONCO, HONG KONG

VERSUCHSFLAKWAGEN FUR 8.8CM FLAK.37 AUF SONDERFAHRGESTELLE (PZ.SFL.IVC) www.hannants.co.uk SCALE; 1:35 • MATERIALS: IM, PE, WS • KIT NUMBER; CB35174 This is the second iteration of Bronco’s Versuchsflakwagen, this version coming with the 88mm Flak.37 gun (courtesy of Dragon Models). The vehicle only reached the prototype stage, but the Flak 88-armed variant makes a terrific model subject. The gun builds up from a mass of parts and the vehicle comes with individuallymoulded, articulated tracks with tiny end-pins. An impressive boxful of kit with some nice display potential. MN

The ‘88 armed Versuchsflakwagen looks very interesting and Bronco’s kit is very well put together Tracks will need careful, methodical assembly and a light touch with the cement

56 October 2015 TMMI 240

p 56-58 NR Kits 240MN.indd 56

28/08/2015 17:52

Kit Reviews

EXTRUDED PLASTIC SECTION, F; FABRIC, IM; INJECTION MOULDED (PLASTIC), ITL; INDIVIDUAL TRACK LINKS, LCC; LASER CUT CARD, LLT; LINK AND LENGTH TRACKS, MC; METAL CHAIN, MMA; MACHINED METAL ED METAL PARTS), PS; PAPER STRIP, R; RESIN, SVT; SOFT VINYL TYRES (OR TUBING), VF; VINYL FIGURES, VFP; VACUUM FORMED (PLASTIC), WC; WOVEN CORD, WD; WATERSLIDE (DECALS), WS; WOODEN STRIP

TRUMPETER, CHINA

CZECH T-72M4CZ MBT www.pocketbond.co.uk SCALE; 1:35 • MATERIALS: IM, PE, CW, PC, WS • KIT NUMBER; 05595 Trumpeter have established themselves as a first class purveyor of modern – ie; post-war – Warsaw Pact (and former Warsaw Pact) armour and their new-tool Czech T-72M4CZ is a prime example. Within the box is all that you need to build a very highly detailed 1:35 replica of this good-looking machine, thanks to the punchy moulded parts and incredibly fine raised and recessed detail. The tracks are individual link, but are of the glue-together type. No problem with this but if you want full articulation, you’ll need a set from Friulmodel. Photo-etched parts are included for the engine deck screens as well as braided copper wire. MN

REVELL, USA

AUTO TRANSPORT TRAILER www.revell.com www.revell.de/eu SCALE; 1:25 • MATERIALS: IM, SVT, WS • KIT NUMBER; 85-1509 This car-transporter isn’t a new moulding but it’s a very welcome re-release as it has potential as a stand-alone model (with a tractor of your choice) or as a means of displaying your existing car models in a novel manner. It’s quite a complete model, the frame/chassis and car decks building up element by element. No less then ten Michelin-branded vinyl tyres are provided, along with metal chain and vinyl hosing for the air lines. MN

An ‘all-in-one-box’ solution for an accurate and detailed model of this Soviet-era MBT

Complex kit (in a good way) and highly realistic when complete; the box-top photo is proof of this

Indi-link tracks are good, but not for all

Perhaps not an ideal kit for beginners TMMI 240 October 2015

p 56-58 NR Kits 240MN.indd 57

57

28/08/2015 17:52

New Releases A selection of the latest full kits in plastic, resin, metal and more!

What’s in the box?

AD; ACETATE DIALS, CC; CAST CERAMIC (PLASTER), CMA; CAST METAL ALLOY, CP; CHROMED PARTS, CPS; CLEAR PLASTIC SHEET, DT; DRY TRANSFER (DECALS), EM: ELECTRIC MOTOR EPS; EXTRUDED PLASTIC SECTION, F; FABRIC, IM; INJECTION MOULDED (PLASTIC), ITL; INDIVIDUAL TRACK LINKS, LCC; LASER CUT CARD, LLT; LINK AND LENGTH TRACKS, MC; METAL CHAIN, MMA; MACHINED METAL ALLOY, MR; METAL ROD, MW; METAL WIRE, MT; METAL TUBING, NM; NYLON MESH, PE; PHOTO ETCH, PEBM; PHOTO-ETCHED BADGES/MIRRORS, PCM; PRE-CUT MASKS, PMP; PRE-ASSEMBLED METAL PARTS), PS; PAPER STRIP, R; RESIN, SVT; SOFT VINYL TYRES (OR TUBING), VF; VINYL FIGURES, VFP; VACUUM FORMED (PLASTIC), WC; WOVEN CORD, WD; WATERSLIDE (DECALS), WS; WOODEN STRIP

ITALERI, ITALY EDUARD, CZECH REPUBLIC

VIETNAM SCOOTERS www.eduard.com www.creativemodels.co.uk SCALE; 1:48 • MATERIALS: IM, R, PE, PCM, WS • KIT NUMBER; 1197 Here we have Hasegawa’s A-4E/F Skyhawk plastic parts – which are superb – married to a large and exquisite decal sheet (printed by Cartograf), plus a modest but effective quantity of photoetched parts, resin ejector seat and die-cut canopy masking set. Six markings options are offered in this limited edition, ranging from 1965 through to 1971 from the Vietnam War theatre. This is an extremely appealing amalgamation of plastic, PE, resin and decals and well worth snatching up before they sell out – which this series often does, rather quickly. MN

An excellent kit, useful add-ons and stunning decals From experience when building Hasegawa’s release, the ‘hump-back’ can be a gappy fit to the upper fuselage, so a little filler might be needed

PETERBILT 378-119 CLASSIC www.hobbyco.net SCALE; 1:24 • MATERIALS: IM, SVT, WS • KIT NUMBER; 3894 Some of Italeri’s best kits will be found in the company’s extensive line-up of trucks and the Peterbilt 378-119 is one of the stars of the range. The detail throughout the kit is pin-sharp, from the highly detailed replica of the truck’s leviathan diesel engine to the cabin’s crisp interior and mega-sized dashboard. The kit has a complex, element by element ladder chassis and looks satisfyingly complex whilst looking quite straightforward to construct. And there are tons of chromed parts too! MN

Wonderful subject choice, excellent detail, finely moulded vinyl tyres and complete engine plus cabin interior Nothing negative here, from our in-box review

58 October 2015 TMMI 240

p 56-58 NR Kits 240MN.indd 58

28/08/2015 17:52

The International Plastic Modellers Society (UK) Presents

Saturday 7th November 2015 Open: 10.00am to 6.00pm

Sunday 8th November 2015 Open: 10.00am to 4.00pm

Admission: IPMS Members FREE Adults: £10.00 each day ~ 2 Day Pass: £15.00 Concessions: £7.00 per day Children under 16: FREE

The International Centre Telford Shropshire TF1 4JH SMW includes over 370 exhibitors, including some 190 trade stands and 180 model clubs

The World’s Greatest Model Show Incorporating the IPMS (UK) National Competition

Book Reviews GOT A NEW BOOK? IF YOU ARE A PUBLISHER WITH A NEW MODELLING RELATED TITLE TO PUBLICISE, WHY NOT SEND IN A COPY FOR REVIEW HERE?

PK CAMERAMAN NO.1, PANZERJÄGER IN THE WEST 1944

RZM PUBLISHING ISBN 978-0-9748389-6-0 £35 plus shipping from good bookshops and www.adhbooks.com (search ‘PK’) The Propaganda Kompanie (PK) photographers of the Second World War German military followed the Wehrmacht and Waffen SS around the world to all the theatres of operation in which they were involved and were thus exposed to a vast amount of combat action. They took over two million stillimages and miles of film footage for use in Goebbel’s extraordinarily effective propaganda campaign throughout the war, edited and censored to show only heroic imagery to the masses. In this ninety-six page, hard-backed volume (from 2013) the reader is treated to a large format (30x30cm) presentation, printed on high grade, matt-finished art paper that has been produced with a strong emphasis on photographic quality. This is just as well, because the photos are of astonishing quality and anything less than perfection would have been a travesty. The focus of this, the first volume, is on Panzerjäger-Abteilung 19(L) during a transfer from the town of Eeklo to new barracks in Zedelgem Belgium, February 1944. From a technical point of view, the PK photographer who documented this exercise (a fellow named Kurth) was clearly quite a talent as his photos are all well composed, in focus and perfectly exposed. The Marder IIIs he shot are from a 1. Kompanie platoon of four vehicles and are all in ‘as-new’ condition, showing the machines in great detail, revealing weld seams, casting textures, bolt, rivet and screw patterns, track and running gear, equipment-fit and much more. From the preceding descriptions you can appreciate how sharp and close-up the photos are. Also clearly visible in the images are areas of scratched-off paint (particularly the final photo in the book, showing a 2cm FlaK) and it’s fascinating to observe how this surface damage is limited to working areas and crew-access zones only, as well as where the fenders have rubbed up against something solid. The remaining painted surfaces are largely unblemished. The Marders are seen in a variety of settings; lined up tidily in the town square, rolling through countryside on un-made roads, driving practice in villages near the barracks and arriving in Zedelgem from Eeklo. All the machines are seen in plain Dunkelgelb, awaiting their combat camouflage and unit markings. As well as the extensive coverage of Marder IIIs and their crews, Kurth the PK photographer also captured Sd.Kfz.7s towing PaK40s and a re-chambered French Model 1897 7.5cm gun. Also shown are captured/modified Ford Eiffel cars that have been painted up in full three-colour schemes, towing 2cm FlaK 38s. Some wonderful modelling ideas are in evidence here. To sum up, this is an extraordinary record of German vehicular manoeuvres in the pre-D-Day months in a relatively quiet mainland Europe; the calm before the storm, as it were. The photos are an absolute gold mine of imagery and the not unreasonable purchase price makes this a ‘must-have’ for armour modellers. Very highly recommended. MN

60 October 2015 TMMI 240

p 60 BookReviews 240MN.indd 60

28/08/2015 17:09

The Destination For Military History

A NEW LOOK FOR OSPREY’S AIRCRAFT OF THE ACES & COMBAT AIRCRAFT TITLES THE LAUNCH TITLES PREPARING FOR TAKE-OFF IN JULY 2015 COMING SOON

AIRCRAFT OF THE ACES

COMING SOON

COMBAT AIRCRAFT

www.ospreypublishing.com

ACE.COM. New Look Advert.indd 1

17/06/2015 14:12

BuyersGuidesBuyersGuidesBuyersGui ABC Models

Tel: 01606 47740 Fax: 01606 47740

167 Witton Street, Northwich, Cheshire, CW9 5EA OPEN Mon-Sat 9.30am-5.00pm

AVIATION & MILITARY BOOK CENTRE Tel: 0845 260 4413 PO BOX 4413, ATHERSTONE, WARWICKSHIRE, CV9 9AS

Aviation and Military Books and Magazines

plastic kits, radio control, slot car & model railways MASTERCARD/VISA/SWITCH

Phone lines open 10am-6pm Mon-Fri, 10am-1pm Sat-Sun Phone, write or visit us online. [email protected] www.aviationbookcentre.com

email: [email protected]

mastercard/visa/switch/paypal/cheques/cash/postal orders

www.abcmodels.co.uk

avid reader

Tel: 01299 823 330 Fax:01299 829 970

Unit 10, Hodfar Road, Sandy lane Ind Estate, Stourport On Severn, Worcestershire, DY13 9QB

Military, Aviation, Naval, Modelling, Railways, Car & Motorcycle Books 9.30 – 4.30 Monday to Friday By Appointment Only

www.bookworldws.co.uk

[email protected]

Visa/MasterCard/Maestro

D-9 models

Tel/Fax: 01633 222282

D-9 Models, Newport Indoor Market, Newport, South Wales NP20 1DD

Monday to Saturday 9am - 4.30pm SPECIALIST PLASTIC KIT MODEL SHOP. Brands include tamiya, trumpeter, italeri, revell, dragon, afv, hasegawa, roden, eduard and more

www.d-9models.co.uk [email protected]

all major credit cards. mail order

DETRITUS MODELS & TERRAIN

Finescale model world ltd

Airfix, Tamiya, Humbrol paints, Tamiya paints, army painter, balsa, Painting & building commissions

MAIL ORDER AND WEBSITE SALES

Tel: 07593 911629

www.detritusmodels.com

[email protected] • www.facebook.com/detritusmodels 78 Thirlemere road Wakefield West Yorkshire WF2 9ER

All major credit cards accepted 

Open mon-wed 10-5:30 turs 2:00-7:30 fri 10-5:30 sat 10-4:30

Gee DEE MODELS Tel: 0115 9412211 Fax: 0115 9417717

21 Heathcoat Street, Nottingham, Nottinghamshire, NG1 3AF Moday to Friday 9.30am - 5.30pm Saturday 9am-5.30pm Specialising in plastic kits, diecast, boats, planes and cars ESTABLISHED 1946

www.geedee-modelshop.com

MAIL ORDER

Tel: +44 (0)1684 252310

(8-00am - 4-30pm)

The UK’s largest mail order company specialising in Scale Automotive model kits with a large selection of aftermarket detailing parts, accessories, books and loads more Unit 59, Basepoint Business Centre, Oakfield Close, Tewkesbury Business Park, Tewkesbury, Glos. GL20 8SD, United Kingdom.

www.hiroboy.com Open: Monday-Thursday: 8.00-4.30, Friday: 8.00-2.30

Kit krazy model shop Tel: 020 8298 7177

303 The Broadway, Bexleyheath, Kent DA6 8DT New and pre-owned kits. Collections bought and sold Aircraft, military, cars, ships, bikes & scifi (70p S.A.E for our list)

Opening hours: 9-30am-5.30pm (closed Wednesday & Sunday)

You can also find us at most major model and airshows throughout the year

www.kitkrazy.com

Tel/Fax: 01902 650077

plastic kits, airbrushes, primers, paints, tools, glues, static grass & accessories

www.finescalemodelworld.co.uk

[email protected]

Up to 20% Discount on mail order

HALIFAX MODELLERS WORLD

Tel: 01422 349157

Halifax Modellers World , 29 Union Street, Halifax, HX1 1PR

All Models,All Makes,All Scales. Opening Hours: Mon,Tues,Thur 10.30-17.30,Wed Closed, Fri 10.30-17.00,Sat 9.30-17.00,Sun 10.30-16.30

www.halifaxmodellersworld.co.uk Email:[email protected]

Tel: 01992 447346

7 Impresa Park, Pindar Road, Hoddesdon, Herts EN11 0DL

10.00am - 4.00pm Monday to FRIDAY Tamiya Radio Controlled Models and Plastic Model Kits of cars, bikes, boats, tanks and planes from Tamiya and most Major Brands always in stock. Racks of paints and a range of Airbrushes always in stock.

[email protected] www.hurricanemodels.co.uk

mastercard/visa/Switch/amex/delta

WWW.LITTLE-CARS.COM Tel: 01234 711980

(24hr answer phone)

We aim to stock all the tools and accessories you will ever need. Micro Mesh, Hold & Fold, Detailing Wire and Mesh, Iwata Airbrushes, MIG pigments, Adhesives.

FROM TINY TWEEZERS TO SIZEABLE SPRAY BOOTHS! Swan & Excel knives, Vallejo, Aztek Airbrushes, Actulite, A300S-D Extractor. Lazertran Decal paper, Deluxe Rust & Snow, Zona Saws, Alclad II, Microbrushes... Multimedia Car kits, Eduard, Sweet and Areotech Aircraft kits. Buy direct or see us at your local model show

email: [email protected]

CREDIT CARDS ACCEPTED

WELSH DRAGON MODELS

MASTERPIECE Models

www.welshdragonmodels.co.uk

www.masterpiecemodels.com

p 62-63 BuyerGuide 240.indd 62

T

all major credit cards

Hurricane models

HIROBOY

C

28/08/2015 16:35

W

SGUIDESBUYERSGUIDESBUYERSGUIDESBUYE

COMING SOON in the ‘HOW TO BUILD...’ series

R E V O C E SAMPL NEW HOW TO BUILD... Tamiya’s 1:32 Mosquito FB.VI by Brett Green

NEW REVISED for 2015 HOW TO BUILD... Tamiya’s 1:35 Steel Wheeled Tiger I by Angus Creighton

ER V O C E L SAMP NEW HOW TO BUILD... Tamiya’s 1:35 Rubber Wheeled Tiger I by Angus Creighton

Visit www.adhbooks.com

WEBDIRECTORYWEBDIRECTORYWEBDIRECTO www.hobbyco.net dragon.com

www.ebbro.com Finest Quality Models

www.creativemodels.co.uk

tamiya.com italeri.com

www.tamiyamodelmagazine.com www.missing-lynx.com www.hyperscale.com

p 62-63 BuyerGuide 240.indd 63

28/08/2015 16:35

Contact details for companies featured in TMMI... ● ACCURATE ARMOUR/ ARMOUR DISTRIBUTION Units 15-16 Kingston Industrial Estate, Port Glasgow, Inverclyde, PA14 5DG Scotland. Tel; 01475 743 955 Fax 01475 743746 www.accurate-armour.com

● DRAGON MODELS (The Hobby Company in UK) Dragon Models Ltd, Kong Nam Ind. Building B1-10F, 603-609 Castle Peak Road, Tsuen Wan NT, Hong Kong Fax (HK) 4110587 www.dragonmodelsltd.com

● THE AIRBRUSH COMPANY Ltd 79 Marlborough Road, Lancing Business Park, Lancing, West Sussex, BN15 8UF, +44 (0) 1903 767800 www.airbrushes.com

● ECHELON FINE DETAILS Available from; wwwaccurate-armour. com & http://pachome1.pacific.net. sg/~kriegsketten/

● AIRCONNECTION Box 21227, RPO Meadowvale Mississauga, ON L5N 6A2, Canada Tel (905) 677-0016 Fax (905) 677-0582 [email protected] [email protected] www.airconnection.on.ca ● AIRWAVES Via Hannants www.hannants.co.uk ● ALBION ALLOYS Spacemaker House, 518 Wallisdown Road, Bournemouth Dorset, UK, BH11 8PT Tel: 01202 511232 Fax; 01202 539967 From outside UK please dial Tele; 0044 1202 511232 Fax;0044 1202 539967 ● ALCLAD II No.5 St Georges Close, Bacton, Norfolk, NR12 0LL. www.alclad2.com Tel; 01692 652166, Fax; 01692 652334 ● AMMO OF MIG JIMENEZ S.L. Navarra (SPAIN) www.migjimenez.com www.theweatheringmagazine.com Email [email protected] In UK; Creative Models ● AMPERSAND PUBLISHING (via Historex Agents in UK) 235 NE 6th Avenue #4 Delray Beach, Florida 33483-5543, USA Tel; 561-266 9686, Fax; 561-266-9786 ● ARCHER (Historex in UK) PO Box 1277 Youngsville, NC 275961277, USA www.archertransfers.com ● BADGER AIRBRUSH 9128 W. Belmont Avenue, Franklin Park, IL 60131, USA 800-AIR-BRUSH • Fax: 800-57BADGER www.badgerairbrush.com [email protected] ● BISON DECALS Available from www.hannants.co.uk and www.pdi-model-supplies.com ● CAMMETT AND CO (Lifecolour, Scale Caliber) Unit 5 Forest Road, Greenfield Industrial Estate, Hay-on-Wye, HR3 5FA, United Kingdom Phone; 01497 822757 Email; [email protected] www.cammett.co.uk ● CLASSIC PUBLICATIONS Midland Counties Publications, 4 Watling Drive, Sketchley Lane Industrial Estate, Hinckley, Leics UK LE10 1YF Tel: +44(0) 1455 233 747, Fax: +44(0) 1455 233 737 [email protected] www.classic-publications.com ● CREATIVE MODELS LTD (Mig Productions, Vallejo, Accurate Miniatures); Unit 6-10, Honeysome Industrial Estate, Honeysome Road, Chatteris, Cambridgeshire PE16 6TG Tel/Fax; 01354 760022 www.creativemodels.co.uk [email protected] ● CZECH SIX PUBLICATIONS 48 Station Road, Stoke D’Abernon, Cobham, Surrey, KT11 3BN UK Tel; 01932 866426 www.czechsixpublications.com

(For 1:6 Action Figures, please contact Amerang in UK)

● EAGLE EDITIONS Ltd PO Box 580 Hamilton MT 59840 USA406 Tel; 363 5415, Fax; 406 375 9270 [email protected] www.eagle-editions.com ● FANTASY PRINTSHOP The Palms Oasis, New Portreath Road, Bridge, Cornwall, TR16 4QL ● FROME MODEL CENTRE 1/2 Catherine Street, Frome, Somerset, BA11 1DA, UK +44 (0) 1373 465295 www.frome-model-centre.com [email protected] ● GRAND PRIX MODELS 4 Thorpe Close, Thorpe Way, Banbury, OX16 4SW. Tel; 01295 278070 Fax; 01295 278072 www.grandprixmodels.com [email protected] ● GREENHILL BOOKS Park House, 1 Russell Gardens, London NW11 9NN, UK Tel 020 8458 6314 Fax 020 8905 5245 www.greenhillbooks.com [email protected]

● MIG PRODUCTIONS C/ Santiago Rusinol 7, Pral 2a, 08750 Molins de Rei, Barcelona, Spain www.migproductions.com In UK; Creative Models ● MODEL DESIGN CONSTRUCTION Unit 3 Hillstown Small Business Center, Mansfield Road, Bolsover, Derbyshire. S44 6LE. Tel; +(44)1246 82 77 55 [email protected] www.modeldesignconstruction.com ● MODEL WHOLESALE UK LTD Unit 3 Dean Close, Raunds, Northants NN9 6BD Tel; 01892 680009 Fax:01892 522526 [email protected] www.modelwholesaleuk.com

● TAMIYA JAPAN Tamiya, Inc., 3-7 Ondawara Suruga-ku, Shizuoka 422-8610 Japan www.tamiya.com

● PANZERWRECKS PO Box 164, Heathfield, Sussex TN21 8WA, UK www.panzerwrecks.com

● TAMIYA UK; THE HOBBY COMPANY LIMITED Garforth Place, Knowlhill, Milton Keynes, MK5 8PG, UK Tel; 01908 605686 Fax; 01908 605666 [email protected] www.hobbyco.net

● PEGASUS HOBBIES (Selected items via Pocketbond in UK) 5515 Moreno Blvd, Montclair, CA 91763 USA www.pegasushobbies.com

● POCKETBOND LTD (Trumpeter & AFV Club in UK) PO Box 80, Welwyn, Hertfordshire, England, AL6 0ND Tel 01707 391509 Fax 01707 327 466 [email protected]

● HIKOKI PUBLICATIONS LTD Ashtree House, Station Road, Ottringham, East Yorkshire, HU12 OBJ, UK

● POL MODELS 64 Cumberland Road, Acton, London, W3 6EY UK [email protected]

● HIROBOY (Zero Paints) Unit 59, Basepoint Business Centre Oakfield Close, Tewkesbury Business Park, Tewkesbury, Glos. GL20 8SD UK Tel: 01684 252310 (UK office hours only) www.hiroboy.com

● PRO-ART MODELS www.proartmodels.be

● ITALERI (The Hobby Company in UK) Via Pradazzo, 6, I-40012 Calderara Di Reno, Bologna, Italy, Tel 051 726037 www.italeri.it ● IWATA AIRBRUSHES The Airbrush Company 79 Marlborough Road (East) Lancing Business Park Lancing, West Sussex BN15 8UF Tel: +44 (0)1903 767 800 www.airbrushes.com. ● JADAR-MODEL Zielna 8/103, 00-108 Warsaw, Poland www.jadar.com.pl [email protected] ● LITTLE CARS Uncle Jacks, Lavendon Road Olney Bucks, MK46 4HH, UK www.little-cars.co.uk Tel (+44) 01234 711980

● THE SMALL SHOP PO Box 580, Kalama WA 98625, USA Tel/fax; (360) 673-1255 [email protected] www.thesmallshop.com

● MONROE PERDU Monroe Perdu Designs, 3168 Renee Court, Simi Valley, CA 93065, USA. www.monroeperdu.com

● HANNANTS Harbour Road, Oulton Broad, Lowestoft, Suffolk, NR32 2LZ. Tel 01502 517444 Fax 01502 500521 www.hannants.co.uk [email protected]

● HUSSAR PRODUCTIONS, CANADA www.airconnection.on.ca

● SCALE MOTORSPORT No.3 Topside Lane, Newtown, Connecticut 06470-2023, USA www.scalemotorsport.com In UK; Grand Prix Models

● SYLMASTA Halland House, Dale’s Yard, Lewes Rd, Scaynes Hill, West Sussex, RH17 7PG Tel; +44(0)1444 415027, Fax; +44(0)1444 458606. Email; [email protected]

● GUNZE SANGYO MDC in the UK

● HOBBYLINK JAPAN Sano-shi, Kurohakama-cho 162-1 Tochigi 327-0813, Japan www.hlj.com

● STUDIO 27 (Grand Prix Models in UK) www.studio27.co.jp

● MODUNI VERSAND GMBH Böttgerstr. 2-14, 65439 Flörsheim, Germany Tel; 06145 5456-0 Fax; 06145 5456-11 [email protected] www.moduni.de

● PLUS MODEL (Creative Models in UK) Jizni 56, 370 10 C. Budejovice, Czech Republic. [email protected] www.plusmodel.cz

● HISTOREX AGENTS Wellington House, 157 Snargate Street, Dover, Kent, CT17 9BZ, UK Tel 01304 206720 Fax 01304 204528. www.historex-agents.co.uk [email protected]

● SQUADRON.COM Squadron Mail Order 1115 Crowley Drive Carrollton, TX 75006 - 1312. USA

● QUICKBOOST www.quickboost.net ● REVELL UK Revell UK, Unit 10, Old Airfield Industrial Estate, Cheddington Lane Tring, Herts, HP23 4QR, UK [email protected] ● RZM PUBLISHING (Greenhill Books In UK) PO Box 995, Southbury, CT 06488 USA Tel; (USA) 203 264 0774 www.rzm.com ● SCHATTON BARRELS Industriestrasse 6, 94347 Ascha, Germany, Fax 09961 910 7826 www.modellbau-schatton.privat.t-online.de email; [email protected] ● SCHIFFER BOOKS Schiffer Publishing, 4880 Lower Valley Rd, Atglen, PA, 19310 USA www.schifferbooks.com ● SCHIFFER BOOKS in UK Bushwood Books, No.6 Marksbury Avenue, Kew Gardens, Surrey TW9 4JF, UK. Tel +44(0)20 8392 8585, +44(0)20 8392 9876, email; [email protected] ● SCHUMO KITS Axel’s-Modellbau-Shop Axel und Bernd Schulze OHG Braustraße 2a 37170 Uslar, Germany Phone: +49 (0) 5571 919 100 Fax: +49 (0) 5571 919 101 www.schumo-kits.com

● TANK MODEL, RUSSIA www.tank-model.ru www.afvmodeller.com ● TANK WORKSHOP 345 Wynbrook Drive McDonough, GA, 30253 USA Tel; (770) 573-1409, Fax; (770) 573-0479 www.tankworkshop.com ● TRUMPETER www.trumpeter-china.com Pocketbond in the UK ● TUNGSTEN DRILLS Allan Sidney No.6, Park Gardens, Holbeach, Lincolnshire, PE12 7PJ [email protected] ● U-MODELS 1103, rue de Feucherolles 78630, Orgeval, France www.u-models.com ● VERLINDEN PRODUCTIONS (Historex in UK) 811 Lone Star Drive, O’Fallon, Missouri 63366, USA (636) 379-0077 www.verlindenonline.com ● VALLEJO (Creative Models in UK) Acrylicos Vallejo, SL Apartado 337 08800 Vilanova i la Geltrú, Barcelona, Spain Tel; (34) 93 893 60 12 Fax; (34) 93 893 11 54 www.acrylicosvallejo.com ● WORLD WAR TWO BOOKS Military History Books Ltd (Mail order address, callers by appointment) 2 Cysgod Y Bryn, Aberystwyth, Ceredigion, SY23 4LR, United Kingdom Tel; 01970 623778 [email protected] www.worldwartwobooks.com ● WIDESPREAD SOLUTIONS Unit 1 Levens Hall Park, Lund Lane, Killinghall, Harrogate, West Yorkshire HG3 2BG, UK. Tel; +44(0)1423 522836 Fax; +44(0)1423 525656 [email protected] www.graphicair.co.uk

■ Please mention ‘Tamiya Model Magazine’ if you make contact with any of the companies listed above - thanks!

64 October 2015 TMMI 240

p 64-65 Contact NI 240MN.indd 64

28/08/2015 17:11

NEXT ISSUE

The next issue of TMMI is November 2015 (No.241), on sale October 22nd

GUIDING STAR

Italeri’s big and beautiful 1:32 F-104G Starfighter in German Navy colours

JOIN THE CLUB

Revell’s recent Golf GTi Mk.I in 1:24, an excellent kit of VW’s original hot-hatch

CHAR TIME!

Another Char B1? Yes! We really love this tank at TMMI and this is a stunning example, built from the recent motorised re-release from Tamiya ...AND MUCH MORE, OF COURSE!

Due to the many factors that can influence the appearance (or non-appearance) of a model in TMMI, the items listed here are shown on a provisional basis. We endeavour to bring you these articles, but please be patient if they do not feature, as all sorts of things can happen to prevent them from appearing on time… Thank you for your understanding!

Order online now at; www.tamiyamodelmagazine.com ISSUE No.240 OCTOBER 2015 PUBLISHED ON SEPTEMBER 17th 2015 Editor; Marcus Nicholls Consultant Editor (USA); Stan Spooner, Editorial Assistant; Matt Benfield Publisher; Alan Harman Graphic Design; Alex Hall TMMI Website; The ADH web team Advertising Manager; Sean Leslie Office Manager; Paula Gray Administration Manager; Hannah McLaurie Administration Assistant; Julie Lane Antipasti; Bruce Ketta Printed by; Symbian Print Intelligence, Hertfordshire, UK Distributed by; Seymour Distribution, 2 East Poultry Avenue, London, EC1A 9PT Tel; 020 7429 4000 Newstrade; Select Publisher Services, 3 East Avenue, Bournemouth, BH3 7BW Tel; 01202 586848 Email; [email protected] Tamiya Model Magazine is published on the third Thursday of each month by ADH Publishing. Editorial enquiries; [email protected] All other enquiries to; [email protected] Tamiya Model Magazine, ADH Publishing, Doolittle Mill, Doolittle Lane, Totternhoe, Bedfordshire, LU6 1QX, UK. Telephone; +44 (0)1525 222573 Editorial enquiries;+44 (0)7904 635 694 Fax; +44 (0)1525 222574. Back Issues; From £4.20 Inc. P&P. Back issues from #75 onwards (excluding #79) are available from the UK address below, or online at www.tamiyamodelmagazine.com

Reproduction in part of any text, photograph, or illustration without written consent from the publisher is strictly prohibited. While due care is taken to ensure the contents of Tamiya Model Magazine is accurate, the publishers and printers can not accept responsibility for errors and omissions. Advertisements are accepted for publication in Tamiya Model Magazine only on ADH Publishing’s standard terms of acceptance of advertising, copies of which are available from the advertising department. Please write to the address below. All editorial, advertising, circulation and subscription enquiries should also be directed to the UK address below.

Subscription rates are; 1 year (12 issues); £44 UK, £56 Europe, £69 Worldwide Binders; £8.50 + P&P (UK-£2.45, Europe-£4.45, Worldwide-£6.45). All prices include postage and packing. For all orders, please call (UK) +44(0)1525 222573 or visit www.tamiyamodelmagazine.com Digital subscriptions available from www.pocketmags.com

© ADH Publishing 2015

CONTACT INFO: Tel: +44(0)1525 222 573 Fax: +44(0)1525 222 574 Editorial enquiries: +44(0)7904 635 694 Doolittle Mill, Doolittle Lane, Totternhoe, Bedfordshire, LU6 1QX, UK www.tamiyamodelmagazine.com Editorial email: [email protected] Other enquiries: [email protected] www.tamiyamodelmagazine.com

The paper used on this title is from sustainable forestry

✁

TO MY NEWSAGENT... Please order Tamiya Model Magazine International for me and reserve/deliver a regular copy starting with issue:-

Name: .............................................................................................................................................................................................. Address: ........................................................................................................................................................................................... ............................................................................................................................................................................................................ ............................................................................................................................................................................................................ ............................................................................................................................................................................................................ Telephone: .......................................................................................................................................................................................

TMMI 240 October 2015

p 64-65 Contact NI 240MN.indd 65

65

28/08/2015 17:11

The Editor’s Page... Modern scale modelling’s has lost its great visionary

In the August issue, I dedicated this page to Mr Francois Verlinden (and his huge influence on me) and it was a joy to do so. This month, I am dedicating ‘The Editor’s Page’ to another famous modeller, but in contrast to the August issue, it is with a heavy heart. Howard Sheperd ‘Shep’ Paine was quite possibly the most important modeller there has ever been; he took scale modelling to a new level of realism and pretty much invented the modern hobby. On August 1st this year, this inspirational man passed away at the much too young age of 69. Sheperd Paine (right, in the red jumper) was born in Berlin (to American parents) and raised in New England, USA. He earned a BA from the University of Chicago, Illinois and worked in the field of military history as a freelance writer and artist. His modelling work is the stuff of legend, influencing the modelling styles of thousands of modellers (Mr Verlinden included) around the world. Below, we can see some of his models, courtesy of www. sheperdpaine.com. Please take a moment to say a private ‘thank you’ to Shep, as it was his work and dedication to scale modelling that shaped our wonderful hobby into the form that we know today. See you again on October 15th! [email protected]

Photo by Scott Taylor

"When you get into dioramas, you are creating a work of art. I don't use the word with a capital 'A' but you are creating a 3-D painting, and the satisfaction you get is much the same. In some ways, dioramas are so interesting because they combine so many elements in different forms: You are basically telling a story without words. It's like silent movies, except you don't have anybody moving” (Shep Paine to the Chicago Sun-Times)

SHEPERD PAINE, 1946-2015

p 66 EditorsPage 240MN.indd 66

02/09/2015 15:59

The Bovington Tiger D6820 Find us on facebook search Plastic Kits UK

p 67 Dragon 240.indd 8

Dragon Kits are distributed in the UK by The Hobby Company Limited, Knowlhill, Milton Keynes, MK5 8PG See the full Dragon range at www.hobbyco.net Dragon models are available from all good model shops

28/08/2015 16:36