9.1 Connectix Cable Systems

Category 6 UTP Cabling System

Compact Module

The Connectix Category 6 Compact Module is designed to provide one of the shallowest wall outlets on the market. They are the ideal solution wherever back-box depth is a problem.

Features & Benefits • Suitable for Gigabit Ethernet applications • Shallow design requires minimal back-box depth • Interchangeable with all other Euro modules and quarter blanks • Fits all standard Euro faceplates • Individually QA tested

The attractive high gloss finish and easy to use labelling system is identical to all other Connectix Cabling Systems Modules, making them interchangeable in most applications.

Specifications Width Depth Height Back-box Depth Material Finish IDC Labels IDC Blocks Conforms to

25 mm 21 mm 50 mm Minimum 15 mm recommended Polycarbonate/ABS thermoplastic resin, with grade UL94 V0 at 1.5 mm flame retardancy High gloss Individual colour coded to T568B 4-way industry standard IDC blocks ANSI/TIA-568-C Category 6 Specification

Category 6 Compact Modules can be fitted into single or dual gang Euro Faceplates and can be combined with quarter blanks and/or voice modules to provide the required configuration. Connectix Category 6 Modules are fully compliant with the ANSI/TIA Category 6 Standard. When used in conjunction with Connectix Category 6 Patch Panels and UTP Cable the user will get a link performance exceeding the Category 6 requirements.

Ordering Information Product Description Cat 6 Compact UTP RJ45 Euro Module

3.1

Part Number 008-000-001-20

©2016 Connectix E&OE

Updated 11/2016

Category 6 UTP Cabling System

2020 Series High Density Patch Panel

The Connectix 2020 Series Patch Panel is an alternative to the Category 6 High Density Elite Panel. It offers the same Category 6 performance as the standard panel but has been designed to present the cable termination IDCs horizontally on a tray at the rear, making termination and cable management easier.

Features & Benefits • Easy to install • Simple cable management • Suitable for Gigabit Ethernet applications • Adjustable recessed mounting version available • Mix and match copper and fibre in one panel • Manufactured in the UK

Category 6 High Density 24 way panels achieve optimum transmission performances by incorporating the highest quality components and innovative on-board compensation techniques.

Specifications Width Depth Height Fixing Centres Material Finish Socket Labels Cable Management IDC Labelling IDC Blocks Conforms to

483 mm (19”) 95 mm 1u (44 mm) 467 mm Mild steel sheet CR4 to BSEN 10130-1999 DC01 Matt black polyester paint Write-on silk screen on panel front Improved cabling facility with easy to use cable tie positions for left and right cable entry Colour coded to T568B Industry standard 4 way IDCs ANSI/TIA-568-C Category 6 Specification

This panels offer extended PowerSum characteristics and exceeds the ANSI/TIA-568-C specifications. When combined with Connectix Category 6 Modules and UTP Cable the link will perform well in excess of the Category 6 specification. LC, SC, ST and FC fibre modules are also available, complete with a Starlight compatible gland hole and integrated management tray. Blank modules can be included for future expansion.

Ordering Information Product Description Cat 6 24 Way High Density 2020 Panel 4 Port ST Fibre Module 2 Port SC Fibre Module 2 Port LC Fibre Module 2 Port FC Fibre Module

3.9

Part Number 009-001-001-40 009-001-040-65 009-001-040-70 009-001-040-80 009-001-040-85

©2016 Connectix E&OE

Updated 11/2016

Category 6 UTP Cabling System

Solid Cable

Category 6 Unshielded Twisted Pair Cable is designed for use in next generation data communications networks, and will comfortably support all present applications including Gigabit Ethernet.

Features & Benefits • Category 6 performance • External grade cable available • UL tested • Every box individually tested in the UK • Supplied metre marked for easy installation • Performance exceeding Category 6 specifications

Connectix Category 6 UTP Solid Cable offers the performance characteristics required by the ever-present Category 6 Standard. When used in conjunction with Connectix Category 6 Modules and Patch Panels the user will get a link performance exceeding Category 6 requirements.

Specifications Inner Conductor 23 AWG plain copper Insulation High density polyethylene Construction 4 twisted pairs cabled together with spline Colour Code Pair 1: White/Blue-Blue/White Pair 2: White/Orange-Orange/White Pair 3: White/Green-Green/White Pair 4: White/Brown-Brown/White Jacket PVC, PE (external) or Low Smoke Zero Halogen Overall Diameter 5.5 mm +/- 0.2 mm Weight (Kg/Km) 39.1 (PVC/PE)/41.2 (LSZH) Min Bending Radius Installation 50 mm Min Bending Radius Installed 25 mm Impedance 100 Ohm +/- 15 Ohm Capacitance < 5.6nF/100 m DC Resistance < 9 Ω/100 m Velocity Ratio 69% Operating Temperature Range -20°C to +60°C Installation Temperature Range 0°C to +50°C Conforms to ANSI/TIA-568-C Category 6 Specification LSZH Jacket Conforms to IEC 60332-1, IEC 61034 and IEC 60754

3.11

Ordering Information Product Description Cat 6 UTP PVC Solid Cable (Grey) Cat 6 UTP External Solid Cable (Black) Cat 6 UTP LSZH Solid Cable (Violet)

©2016 Connectix E&OE

Part Number 001-003-005-00X 001-003-005-10X 001-003-005-60X

Updated 11/2016

Fibre Optic Cabling

Sliding Patch Panels

The Fibrefox range of sliding patch panels are available with a wide range of adaptor types and populations. The panels are manufactured from mild steel and are finished in a black powder coating. The panels feature fully adjustable mounting brackets, numbered adaptor ports and a range of panel knock-outs to suit common gland sizes. The panels include a sliding tray for easy access to splices. Panels are supplied fully loaded and complete with splice management. Unloaded versions and other connector styles are available upon request. Features & Benefits • Easy access to splices from the front of the rack • LC, SC & ST versions available • High quality rigid mild steel construction • Rear cable gland knock outs • Adjustable mounting brackets for flush or recessed fitting • Fibre management kits included

Specifications Width Depth Height Weight Colour Cable Entry Gland Holes

9.3

Ordering Information Product Description Sliding Panel, 4 Duplex LC Multimode Sliding Panel, 8 Duplex LC Multimode Sliding Panel, 12 Duplex LC Multimode Sliding Panel, 16 Duplex LC Multimode Sliding Panel, 24 Duplex LC Multimode Sliding Panel, 12 Quad LC Multimode Sliding Panel, 16 Quad LC Multimode Sliding Panel, 18 Quad LC Multimode Sliding Panel, 24 Quad LC Multimode

Part Number 009-022-040-04S 009-022-040-08S 009-022-040-12S 009-022-040-16S 009-022-040-24S 009-022-040-48S 009-022-040-64S 009-022-040-72S 009-022-040-96S

Sliding Panel, 4 Duplex LC Singlemode Sliding Panel, 8 Duplex LC Singlemode Sliding Panel, 12 Duplex LC Singlemode Sliding Panel, 16 Duplex LC Singlemode Sliding Panel, 24 Duplex LC Singlemode Sliding Panel, 12 Quad LC Singlemode Sliding Panel, 16 Quad LC Singlemode Sliding Panel, 18 Quad LC Singlemode Sliding Panel, 24 Quad LC Singlemode

009-023-040-04S 009-023-040-08S 009-023-040-12S 009-023-040-16S 009-023-040-24S 009-023-040-48S 009-023-040-64S 009-023-040-72S 009-023-040-96S

Sliding Panel, 4 Duplex SC Multimode Sliding Panel, 8 Duplex SC Multimode Sliding Panel, 12 Duplex SC Multimode Sliding Panel, 16 Duplex SC Multimode Sliding Panel, 24 Duplex SC Multimode

009-022-020-04S 009-022-020-08S 009-022-020-12S 009-022-020-16S 009-022-020-24S

483 mm (19”) 200 mm 1u (44 mm) 2.8 kg (fully loaded) Black (RAL9004) 4 x 10 mm and 2 x 20 mm

©2016 Connectix E&OE

Updated 12/2016

Fibre Optic Cabling

Internal/External Tight Buffered Distribution Cable

The Fibrefox Multi-purpose Tight Buffered Distribution Cable provides a cost effective solution to all internal/external datacomms cabling requirements, particularly where on-site direct connections are the preferred termination technique.

Features & Benefits • Fire retardant LSZH jacket • Up to 24 fibres • Choice of fibre type and specification • Small diameter • Water and UV resistant • Internal or external use • Easy to handle • Small bending radius • Low cost

The cable consists of individually colour coded 900 μm secondary coated fibres, embedded in an E-glass yarn, and over sheathed with a single Low Smoke Zero Halogen (LSZH) outer jacket. The jacket is flame retardant, UV stabilised and extremely resistant to the ingress of moisture. A choice of multimode and singlemode fibre types and specifications are offered, with fibre counts from two to twenty four in the standard range.

Specifications Jacket Material Black LSZH Crush Resistance 1000 N/100mm² Min. Bend Radius 10 x cable diameter Min. Bend Radius (Load) 20 x cable diameter Temperature Range -20⁰C to + 70⁰C Number of Fibres 4 8 12 16 24 Cable Outer Diameter (+/- 0.2 mm) 5.0 6.2 6.8 7.2 8.0 Outer Jacket Thickness (mm) 1.0 1.0 1.05 1.1 1.15 LSZH Jacket Conforms to IEC 60332-1, IEC 61034 and IEC 60754

Ordering Information Product Description Tight Buffered OS2 9/125 (Black) Tight Buffered OM1 62.5/125 (Black) Tight Buffered OM2 50/125 (Black) Tight Buffered OM3 50/125 (Black) Tight Buffered OM4 50/125 (Black)

Their small diameter, lightweight and excellent environmental performance makes these cables ideal for installation in a broad range of network applications including LAN backbones, networks with mixed indoor and outdoor cabling, outdoor in flooded ducts and any premises distribution system.

Free Cut to Length Service Part Number 002-005-011-xx 002-005-005-xx 002-005-006-xx 002-005-004-xx 002-005-009-xx

Connectix hold extensive stock of multi purpose tight buffered distribution cables. We offer a fast turnaround cut to length service providing lengths to your exact requirements. This service is free of charge, and all orders from stock can be available for next day delivery.

xx = number of fibres

9.17

©2016 Connectix E&OE

Updated 12/2016

Cabinets

Floor Standing Cabinets

The range of 19” Floor Standing Cabinets are an ideal solution for housing network hardware and patching equipment. The robust design makes them suitable for use in IT departments and offices.

Features & Benefits • Ventilated top • Adjustable mounting posts • Lockable Perspex front door • Lockable and removable rear door • Cable access in base • 800 kg static load capacity • Supplied fully assembled

Ordering Information Product Description Floor Standing 12u 600w x 600d Floor Standing 18u 600w x 600d Floor Standing 21u 600w x 600d Floor Standing 24u 600w x 600d Floor Standing 27u 600w x 600d Floor Standing 39u 600w x 600d Floor Standing 42u 600w x 600d

Part Number RR-F1-12-P RR-F1-18-P RR-F1-21-P RR-F1-24-P RR-F1-27-P RR-F1-39-P RR-F1-42-P

Floor Standing 12u 600w x 800d Floor Standing 18u 600w x 800d Floor Standing 24u 600w x 800d Floor Standing 27u 600w x 800d Floor Standing 39u 600w x 800d Floor Standing 42u 600w x 800d

RR-F2-12-P RR-F2-18-P RR-F2-24-P RR-F2-27-P RR-F2-39-P RR-F2-42-P

Floor Standing 21u 800w x 600d Floor Standing 27u 800w x 600d Floor Standing 42u 800w x 600d

RR-F3-21-P RR-F3-27-P RR-F3-42-P

Floor Standing 27u 800w x 800d Floor Standing 27u 800w x 800d Floor Standing 42u 800w x 800d

RR-F4-27-P RR-F4-27-P RR-F4-42-P

The cabinets are available in various configurations and are supplied fully assembled. Each cabinet utilises a ventilated top and four 19” adjustable front and rear mounting posts. The cabinets feature lift-off sides and a lockable door for maximum access to the internal equipment, with cable access in the base for convenient routing of network cables. The side panels can be fitted with cabinet locks. The cabinet frameworks are finished in black with a Perspex lockable front door. These 19” Floor Standing Cabinets incorporate the essential features for data communication environments - security, durable construction, easy access and protection from dust or contamination for the network equipment.

Accessories A full range of cabinet accessories are available including; wall mounting frames, PDUs, fixed shelves, telescopic shelves, castors, cage nuts, baying kits, roof mounting fan units and plinths. See the cabinet accessories page.

11.5

©2016 Connectix E&OE

Updated 11/2016

Cabinets

Wall Mounting Cabinets

The compact design of the 19” Wall Mounting Cabinets make them ideal for smaller networks and workgroups.

Specifications Cable Access Holes

Width (mm)

63 mm x 343 mm (1 top 1 bottom) Height (U)

6

9

12

15

18

21

Height (mm)

325

455

590

720

855

990

Depth (mm)

The cabinets feature a ventilation slots in the top, have a lockable glass front door, and removable sides. The cabinet is finished in a high quality attractive black.

Weight (kg)

RR-W1

14

18

21

25

28

RR-W2

15

18

21

24

28

31

RR-W3

20

23

27

31

36

40

RR-W4

25

30

35

41

46

52

28

33

38

45

51

58

RR-W5

600

600

The cabinets are available in various sizes and are supplied fully assembled. Each cabinet comprises a welded steel frame and adjustable front and rear 19” mounting profiles. Cable access positions with removable plates are situated in the top and bottom of the cabinet.

Features & Benefits • Ventilated top • Adjustable mounting posts • Removable side panels • Removable cable plates access in base and top • Lockable glass front door • Supplied fully assembled

Ordering Information Product Description Wall Mounting Cabinet 6u 550 × 450 mm Wall Mounting Cabinet 9u 550 × 450 mm Wall Mounting Cabinet 12u 550 × 450 mm Wall Mounting Cabinet 15u 550 × 450 mm Wall Mounting Cabinet 18u 550 × 450 mm

Part Number RR-W1-6-G RR-W1-9-G RR-W1-12-G RR-W1-15-G RR-W1-18-G

Wall Mounting Cabinet 6u 550 × 550 mm Wall Mounting Cabinet 9u 550 × 550 mm Wall Mounting Cabinet 12u 550 × 550 mm Wall Mounting Cabinet 15u 550 × 550 mm Wall Mounting Cabinet 18u 550 × 550 mm Wall Mounting Cabinet 21u 550 × 550 mm

RR-W2-6-G RR-W2-9-G RR-W2-12-G RR-W2-15-G RR-W2-18-G RR-W2-21-G

Wall Mounting Cabinet 6u 600 × 450 mm Wall Mounting Cabinet 9u 600 × 450 mm Wall Mounting Cabinet 12u 600 × 450 mm Wall Mounting Cabinet 15u 600 × 450 mm Wall Mounting Cabinet 18u 600 × 450 mm Wall Mounting Cabinet 21u 600 × 450 mm

RR-W3-6-G RR-W3-9-G RR-W3-12-G RR-W3-15-G RR-W3-18-G RR-W3-21-G

Wall Mounting Cabinet 6u 600 × 550 mm Wall Mounting Cabinet 9u 600 × 550 mm Wall Mounting Cabinet 12u 600 × 550 mm Wall Mounting Cabinet 15u 600 × 550 mm Wall Mounting Cabinet 18u 600 × 550 mm Wall Mounting Cabinet 21u 600 × 550 mm

RR-W4-6-G RR-W4-9-G RR-W4-12-G RR-W4-15-G RR-W4-18-G RR-W4-21-G

Wall Mounting Cabinet 6u 600 × 600 mm Wall Mounting Cabinet 9u 600 × 600 mm Wall Mounting Cabinet 12u 600 × 600 mm Wall Mounting Cabinet 15u 600 × 600 mm Wall Mounting Cabinet 18u 600 × 600 mm Wall Mounting Cabinet 21u 600 × 600 mm

RR-W5-6-G RR-W5-9-G RR-W5-12-G RR-W5-15-G RR-W5-18-G RR-W5-21-G

11.6

©2016 Connectix E&OE

Updated 11/2016