Product Mix 2009XS 002, XS 600 - Wood preservatives 50980-09800 XS 002 PINOTEX IMPR.SEALER 20/200 L EST * * Very limited wood swelling. Gives biologic...
37 downloads
34 Views
523KB Size
PRODUCT MIX
2009
XS 002, XS 600 - Wood preservatives 50980-09800 XS 002 PINOTEX IMPR.SEALER 5010-004009 XS 600 IMP. SEALER WH 900 (70562-58669) 70828-xxxxx XS 600 IND.PINOTEX WB TINTED 5050-002001 XS 600 AQUA PRIMING OIL ("GRUNDOLJA" 70980-46166)
20/200 L
EST
25/1000 L
SWE
18 L
SWE
20/1000 L
SWE
** ** ** ☼
20 L
SWE
***
25 L
ITA
25 KG
ITA
25 KG
ITA
25 KG
ITA
25 L
SWE
20 L
SWE
☼ *** ** * ☼ ☼
20 L
SWE
***
No wood swelling, good filling and levelling. Gives protection against knot yellowing.
*** ☼
Good surface resistance, plastic look surface.
Very limited wood swelling. Gives biological protection for wood. Concentrate (dilute with water 1:9) for impregnation of pinewood. Low L price of mixture. Available in different colours, including SIKKENS color card. New
Pretreatment for claddings to minimize risk of cracking and decay. Gives protection against moisture uptake and wood rot.
Varnishes XV 500 - polyurethane 2575-001251 XV 500
D-DUR GL.27 (71420-00072)
XV 600, XV 610 - waterborne 101.36 XV 610 INTERMEDIATE SEALER 201.15.30 XV 610 HYDROTIX WB (70201-01530) 201.23.30 XV 610 HYDROTIX HSP 30 201.34.40 XV 600 TIX WB Gl.40 (71801-00340) 5100-010151 XV 600 AQUA GARDEN FURNITURE LASUR 5100-007251 XV 610 WA CLEAR TOP
Contains UV-filter, good surface resistance and outdoor properties.
New
Minimum losses during application as suitable for dipping, lowers price for system. Spray version is 101.35. New generation exterior varnish - less water sensitivity, cement resistant, good transparency
New
New generation exterior varnish - excellent outdoor durability, good stackability and high transparency.
OLD
Lower L price. Blushing may occure due humidity. Add 5% 70828-xxxxx to uniform shade.
New
Add 5% 70828-xxxxx to uniform shade on pinewood garden furniture. Flow-coat/ dipping application.
New
For interior part of Wood/Al windows. Good stackability, fast drying and nice transparency. Tintable by Aquaflex.
Exterior primers and topcoats XP 500 - polyurethane primer 2650-750001 XP 500 D-DUR PRIMER (70536-01149) XC 500 - polyurethane topcoats 2675-756251 XC 500 D-DUR TOPCOAT S0502-Y (71132-01907) 71132-xxxxx XC 500 D-DUR TINTED (2675-003251 (00)/-755251 (01) XP 600, XP 610, XP 650 - waterborne primers 5250-764001 XP 650 AQUA PU PRIMER (70536-46255) 5550-750001 XP 640 AQUA UV PRIMER GREY 5200-751001 XP 610 PRIMER 205 (70461-46205) 5200-757001 XP 610 PRIMER 225 (70461-46225) 5200-750001 XP 610 FLOW-COAT PRIMER (71983-02896) 5225-003001 XP 600 AQUA CLADDING PRIMER Base 00 and 01 (-770001) XC 610 - waterborne topcoats 5275-757251 XC 610 US-A 325 S0502-Y (71254-46409) 5275-756251 XC 610 US-A 325 RAL 9010 (71254-46408) 70254-4649x XC 610 US-A 325 TINTED (5275-005251 (00)/-761251 (01) 5275-775401 XC 610 US-A 336 S0502-Y 5275-778201 XC 610 AQUA COMBI WA 20 TX
20 L
SWE
16,2/18 L
SWE
20 L
SWE
20 L
SWE
20 L
SWE
20 L
SWE
120 L
SWE
20 L
SWE
20 L
SWE
20 L
SWE
10,8/18 L
SWE
20 L
SWE
20 L
SWE
*** ☼ ** ** ☼ ☼
** ** ☼ ☼ ☼
Tintable by Tintflex - available in different colours by NCS, RAL etc. Color cards.
Best stainblocking and adhesion even on vacum impregnated wood. WB topcoat can be applied wet-on-wet after 30 min.
New
UV curing product for exterior joinery - fast process. White version is 5550-751001. Gives limited protection against discoloration on resinuous wood and knots. Containes fungicides. Fast drying primer for exterior HDF. Good sandability. Even thick layers possible without cracks. For dipping and flow-coat technology. Good water repellant properties. SIKKENS analoque is RUBBOL WP 175 and WP 176.
New
Tinting bases for priming of claddings. Gives a good water resistance and adhesion.
Good stackability and surface hardness; Gl.35 is US-A 335 5275-755351. Good stackability and surface hardness, after 30 min. can be used wet on wet on PU or WB-PU primer. US-A 325 tinting bases by Aquaflex tinters. New
Quick drying and excellent surface hardness makes it suitable for exterior doors.
New
For interior parts of Wood/ Al windows. Quick drying, good surface hardness and good stacking properties. Can be used in 2 coats.
For industrial use only. This information is advisory and not legally binding. The statements are based on our present knowledge showing without any obligation the applications of our products. We recommend that you make tests to determine the suitability of a product for your particular purpose prior to use.
Interior putties, sealers and lacquers IS 100 - nitrocellulose sealers 151.40 IS 100 NC HIGH SOLID SEALER (71677-03340) 50401-00022 IS 100 NC-SEALER IL 100 - nitrocellulose lacquers 251.04.40 IL 100 EXTRANOBEL Gl. 40 50400-00030 IL 100 NC-LACQUER GL.30 50400-30030 IL 100 NITROCELL GL.30 1500-004081 IL 100 CELCOLINE 10 (71441-20119) 254.34.35 IL 100 NC DIPPING LACQUER 251.98.30 IL 100 NC-PU SELF-SEALER IS 200 - acid curing sealers 2025-001921 IS 200 SEALER (71431-09392) 2025-001931 IS 200 LIGHT SEALER (71431-09393) IL 200 - acid curing lacquers 2050-005311 IL 200 PLASTOFIX 96 GI.30 (71421-09631) 2050-002321 IL 200 PLASTOFIX EL.STAT (71421-01432) 2050-021201 IL 220 ELS 125 2050-009201 IL 200 DANSPEED 90 Gl.20 (71432-09020) 2050-008301 IL 200 SPEEDLINE RF Gl.30 (71432-02631) 2075-002201 IL 220 ES LACQUER Gl. 30 2050-005991 IL 200 PLASTOFIX 96 GLOSSY (71421-09699) 2050-019901 IL 220 IL 190 Gl. 90 25 L (70466-52189) 2050-020251 IL 220 IL 735 Gl.30 (70466-52199) IS 300 - polyester sealer 141.73 IS 300
THIX U.P.E SEALER
IS 500 - polyurethane sealers 111.22 IS 500 PU THIX HIGH SOLID SEALER (71676-00222) 111.21 IS 500 PU HIGH SOLID SEALER 110.04 IS 500 PU SEALER (71625-00104) 110.40 IS 500 LONG POTLIFE PU SEALER 411.39 IS 500 PU ISOLANTE (71675-03209) 131.52 IS 540 DUAL CURE SEALER PF 115 IS 500 FIRE RETARDANT PU SEALER IL 500 - polyurethane lacquers 211.27.30 IL 500 PU THIX HIGH SOLID LACQUER Gl.30 (71625-00227) 212.01.20 IL 500 PU HIGH SOLID LACQUER Gl.20 210.26.30 IL 500 PU MAT LACQUER (71625-00226) 210.00.25 IL 500 PU MAT ANTISCRATCH (71650-00025) 1.433.9523 IL 500 PUROLEIT LACQUER 1.433.9601 IL 500 PU-NC LACQUER 210.40.25 IL 500 LONG POTLIFE PU LACQUER 211.04.99 IL 500 PU HIGH GLOSSY LACQUER (71641-00104) 2525-006951 IL 500 D-DUR GLOSSY LACQUER (71420-00071)
25 L 20/195 L
25 L
ITA EST
ITA
20/195 L
EST
20/195 L
EST
*** **
High solid sealer with very good filling properties adhesion and flexibility.
*** ** * ☼ ☼ ☼
Good scratch resistance and levelling, shows wax-finishing effect.
20 L
SWE
25 L
ITA
25 L
ITA
20 L
SWE
20 L
SWE
20 L
SWE
25 L
SWE
25 L
SWE
20 L
SWE
20 L
SWE
20 L
SWE
20 L
SWE
25 L
SWE
20 L
SWE
*** *** * ** * * ☼ ☼ ☼
25 KG
ITA
***
25 L
ITA
25 L
ITA
5/25 L
ITA
25 L
ITA
5/25 L
ITA
*** *** ** ☼ ☼ ☼ ☼
25 KG
ITA
5/25 KG
ITA
25 L
ITA
25 L
ITA
5/25 L
ITA
25 L
ITA
25 L
ITA
25 L
ITA
25 L
ITA
5/25 L
ITA
20 L
SWE
Standard fast drying NC-Sealer with excellent sanding properties.
Standard NC-Lacquer with quick drying and good sanding properties. Economical in price per liter. Good sanding properties. IKEA compatible aromatic free lacquer for pine and spruce. Celcoline 25 is 1500-005201. New
Self-sealer with excellent slip and surface smoothness.
New
Higher build and better adhesion when adding 5% of hardener 315.15
** **
*** *** ** ** * * ☼ ☼ ☼
Clear precatalized (1K) and fast drying AC Sealer. Can be used in system with NC Top lacquer.
Whitish precatalized (1K) and fast drying AC Sealer. Especially designed for pinewood.
For el.stat spray incl. high speed bells and discs. Gives high buildt and resistant surface. OLD
For el.stat spray. Gives high buildt, but also flexible, resistant and smooth surface.
OLD
Economical alternative for el.stat spray, high solid content. All round lacquer with good ratio between solid content and drying time. Very fast drying lacquer with good wetting properties. Can be tinted with Aquaflex tinters.
New
1K AC self-sealer gives ample and resistant surface. Prevents sweating on pinewood knots.
High solid glossy AC-lacquer gives high build and resistant finish. OLD
High solid glossy AC-lacquer can be used to increase gloss of other AC products.
New
Good transparency and adhesion on exotic woods, flexibe - can be applied in many coats to build thick film.
Very high solid content, thix. In case of stains or low quality MDF use 411.39 as first coat.
Very filling thix PU sealer with good transparency and sandability. New
Multipurpose HS sealer with good build, elasticity, sandability and transparency. General PU-Sealer with good quality/ price ratio. Excellent sandability.
New
Long potlife (24h) PU Sealer with good sandability. PU-Sealer for improving adhesion and elasticity on MDF and wooden substrates.
New
PU-UV o.p. sealer designed for wooden kitchen cabinets. Fast curing and good sandability.
Fire retardant "Class 1" PU sealer for wooden substrates where fire prevention is required.
PU thix lacquer with good filling properties and flow. Good quality/ price ratio. New
High build self-sealer for closed pore finishing. No need for intermediate sanding. General PU-lacquer with very good filling and smoothness. High surface hardness and scratch resistance. UV absorber. Best PU for autom. spraying.
!!!
Excellent chemical and mechanical resistance and cold-check results. Fast drying
ok
Fast drying and good sandability.
New
Long potlife (24h) PU Lacquer. Can be used as self-sealer. High gloss 210.40.99. High glossy PU-lacquer. Polishing possible after 48-72h.
OLD
High glossy PU-lacquer with superior chemical resistance and fast drying. Good price!
217.11.20 2525-003201 211.57.35 220.50.30 OPNI 115.35
IL 500 IL 500 IL 500 IL 540 IL 500
PU ACRYLIC LACQUER (71217-01120)
25 L
ITA
DUADEN 25 (70420-55135)
25 L
SWE
PU PARQUET LACQUER Gl.60 (71644-00570) DUAL CURE LACQUER FIRE RETARDANT PU MAT LACQUER
IS 610, 640, 650 - waterborne sealers 103.01 IS 650 WB PU SEALER 3000-007001 IS 610 SANDOSEAL IL 610, 640, 650 - waterborne lacquers 203.01.20 IL 650 WB PU LACQUER Gl.20 3750-002301 IL 640 SUPERLUX WB UV COMBI LACQUER (71438-07730) 3750-003301 IL 640 CELCOLUX WB UV COMBI LACQUER (71438-36630) 3025-010301 IL 610 SUPERCRYL 30 3025-031301 IL 610 SUPERIOR 30 3025-022251 IL 610 AQUA INTERIOR Gl.30 (71423-07130) 3025-030151 IL 610 SUPERLINE 15 3025-033301 IL 610 AQUA LEAN 25 203.03.99 IL 650 WB PU GLOSSY LACQUER 203.02.30 IL 650 WB PU PARQUET LACQUER Gl.30 3750-003111 IL 640 CELCOLUX WB UV Base 00 200.10.25 IL 610 DIPPING LACQUER Gl.25 (200.10.25) 3025-006251 IL 610 AQUA ALLROUND 25 Gl.20 (71423-46116) 3025-014251 IL 610 AQUA KANTLACK Gl.25 (71423-46178) UV-curing putties, sealers and lacquers 0500-002001 IF 400 UV LIGHT FILLER (70520-57569) 4000-012001 IS 400 UV SEALER (71437-02494) 4000-013001 IS 400 UV SEALER (71437-02780) 4000-019001 IS 400 UV SEALER (3651) 4040-003001 IS 400 UV SPRAY SEALER PINOLUX (71437-36146) 4120-007301 IL 400 UV LACQUER (71437-02227) 4120-004251 IL 400 UV HARDTOP LACQUER (71437-04046) 4220-001201 IL 400 UV COMBILACQUER (71437-04120) 4120-001001 IL 400 UV LOW GLOSS LACQUER (71437-57572) 4120-005001 IL 400 UV GLOSSY LACQUER (71437-05000) 0500-009001 IL 400 UV SOLID EDGE 4230-003201 IL 400 UV SPRAY COMBI LACQUER
5 L
ITA
25 KG
ITA
5/25 KG
ITA
5/25 KG
ITA
20 L
5/25 KG
SWE
ITA
20 L
SWE
20 L
SWE
20 L
SWE
20 L
SWE
20 L
SWE
20 L
SWE
20 L
SWE
25 KG
ITA
10/25 KG
ITA
20 L
SWE
25 KG
ITA
20 L
SWE
20 L
SWE
20 L
SWE
20 L
SWE
20 L
SWE
20 L
SWE
20 L
SWE
20 L
SWE
20 L
SWE
20 L
SWE
20 L
SWE
20 L
SWE
20 L
SWE
20 L
SWE
☼ ☼ ☼ ☼ ☼
Very low yellowing self-sealer with good wetting and wax effect. Available with Gl. 35 and 5.
OLD
PU-lacquer for parquet or heavy duty furniture. Glossy and lower gloss also available. New
PU-UV lacquer for wooden kitchen cabinets. Fast curing and good stackability. Fire retardant "Class 1" PU lacquer for wooden substrates where fire prevention is required.
*** **
New
*** *** ** *** *** ** ** * ☼ ☼ ☼ ☼ ☼ ☼
New
*** *** *** * *** *** *** * ☼ ☼ ☼ ☼
Highest chemical and mechanical resistance. Can be used on AC sealer.
Excellent build and sandability. 1h time in between when 2 coats applied wet-on-wet. Sealer with excellent filling and sanding, good transparency on dark types of wood.
Excellent build and surface hardness For all types of wood. High chemical and mechanical resistance, good transparency. Price optimized version of WB-UV for all wood types. Good transparency.
New
Good filling and high surface resistance. Very transparent and tintable by Aquaflex tinters.
New
For short lines as gives early stackability and surface hardness. Very good wetting. Quick drying. Also available 71423-07105/ -07115/ -07160 and high visc. version -07131
New
Price optimized version of Supercryl 30. High surface resistance.
New
Price optimized version of Aqua Interior for economical treatment of wood.
New
Very good brilliance and surface hardness. Can be polished after 72 hours. WB-PU lacquer for flooring and heavy duty furniture. Application - brush, roller or spray gun.
New
This sealer/top-coat is tintable by Aquaflex colorants up to 25 imp. per litre. WB-dipping self-sealer with excellent build and surface hardness
OLD
Suitable for all kind of wood types. For finishing edges in stack. Very transparent, good wetting and filling. Can be tinted.
For light putty machine. Lower visc. is -005001(57577) and higher visc. is - 001001(57555). This thick sealer is very filling and transparent, has very good adhesion and sanding properties.
Good adhesion on pine knots and stain. Gives high build, excellent sanding and transparency.
New New
Economy range sealer with high build and good sanding to lower m2 price in system. Good on pine with knots. Tintable with TI 760 UV-TINTERS. Higher visc. is 4120-007401(2237). Mat is 4120-007171(2217).
Gives very hard and scratchproof surface. Very stable. Price optimized UV-curing self sealer. New
Very good scratch, abrasion and chemical resistance. Approved for children furniture.
New
Gives ample and resistant high gloss surface.
New
For edge coating machine and for extruder coating.
New
Very short and fast processing time. Better flow with pre-heating. Mat version is 4160-0012451.
For industrial use only. This information is advisory and not legally binding. The statements are based on our present knowledge showing without any obligation the applications of our products. We recommend that you make tests to determine the suitability of a product for your particular purpose prior to use.
Interior putties, primers and topcoats IP 100 - nitrocellulose primer 151.21/01 IP 100 NC-PRIMER WHITE IC 100 - nitrocellulose topcoats 50230-00011 IC 100 NC-ENAMEL WHITE IP 200 - acid curing primers 2100-751001 IP 200 SH-SURF PRIMER (70525-54115) 2100-754001 IP 200 TRÄFF PRIMER (70525-54181) 2100-753001 IP 200 PROFF PRIMER 150 (70525-54150) 2100-750001 IP 200 TRÄFF TIX PRIMER (70525-54112) 2100-001001 IP 200 PLASTICOLOR PRIMER (70462-01400) IC 200, IC 220 - acid curing topcoats 2150-780401 IC 200 PROFF 355 WHITE (70121-58969) 2150-765201 IC 220 TRÄFF 35 NCS 0502-Y (70104-53441)/ Gl.45 (2150-770251) 2150-600201 IC 200 PROFF 355 BLACK (70121-53132) 70121-472xx IC 200 PROFF TINTED 2150-002301 (00 Base)/ 2150- 751401 (01 Base) 70121-5349x IC 220 TRÄFF 480 TINTED 2150-004901 (00 Base)/2150- 772901 (01 Base) IP 500 - polyurethane primers 111.30/01 IP 500 PU PRIMER WHITE (71676-14300) 111.58/01 IP 500 PU PRIMER WHITE (71676-11158) 131.50/01 IP 540 UV DUAL CURING PRIMER PF 115/01 IP 500 FIRE RETARDANT PU WHITE PRIMER IC 501 - polyurethane topcoats 71256-XXXXX IC 500 TX 501 TINTED PU GLOSSY TOPCOAT (689.56.99 (00)/ 689.56.99/01 (01) 71655-XXXXX IC 500 TX 500 TINTED PU TOPCOAT (689.55.30 (00)/ 689.55.30/01 (01) 231.50.99/01 IC 540 UV DUAL CURING TOP COAT WHITE PO 115.35/01 IP 500 FIRE RETARDANT PU WHITE ENAMEL IP 610, 640, 650 - waterborne primers 103.01/01 IP 650 WB PU PRIMER 102.51/01 IP 640 WB UV PRIMER 3200-766001 IP 610 AQUA SURF 099 3200-756001 IP 610 AQUA PRIMER E (70568-46319) 3200-779001 IP 610 AQUA SPRAY PRIMER 107 IC 610, 640, 650 - waterborne topcoats 203.01.20/01 IC 650 WB PU TOP COAT WHITE 3875-753301 IC 640 PLASTOLUX 30 WB UV NCS 0502-Y (70238-04130) 3225-770201 IC 610 SUPERCRYL 20 NCS 0502-Y 3225-775301 IC 611 SUPERIOR 30 NCS 0502-Y 3225-761301 IC 610 AQUA INTERIOR OP NCS 0502-Y (70228-46482) 3225-776351 IC 610 SUPERCRYL TX 01 Base/ 00 Base is 3225-008351 71228-464xx IC 610 AQUA INTERIOR OP TINTED (3225-002301 (00 Base)/ - 758301 (01Base) IF 400, IP 400 - UV-curing putty, UV-curing primer 70520-09009 IF 400 UV ACRYLIC PUTTY WHITE 4250-753001 IP 400 UV PRIMER WHITE (527-1914) 4250-760001 IP 400 UV BASECOAT WHITE (70927-04000) 4290-750001 IP 400 UV SPRAY PRIMER WHITE IC 400 - UV-curing topcoat 4350-760401 IC 400 UV TOP COAT IKEA WHITE 5 Gl.55 (70138-36841) 4390-751301 IC 400 UV SPRAY TOP COAT WHITE
ITA
***
EST
**
20 L
SWE
20 L
SWE
20 L
SWE
20 L
SWE
20 L
SWE
*** ** * ☼ ☼
20 L
SWE
20 L
SWE
20 L
SWE
16,2/18 L
SWE
9,7/10,8 L
SWE
25 KG
20/195 L
25 KG
ITA
25 KG
ITA
25 KG
ITA
5/25 KG
ITA
9 L
ITA
9/18 L
ITA
25 KG
ITA
5/25 KG
ITA
25 KG
ITA
25 KG
ITA
20 L
SWE
20 L
SWE
1000 L
SWE
5/25 KG
ITA
20 L
SWE
20 L
SWE
20 L
SWE
20 L
SWE
12 L
SWE
9 L
SWE
20 L
SWE
20 L
SWE
20 L
SWE
20 L
SWE
20 L
SWE
20 L
SWE
** ☼ ☼ ☼ ☼
** * ☼ ☼
** ** ☼ ☼
Excellent hiding power, very good filling and sanding properties.
Standard NC top-coat with very good hiding power.
New
AC primer with good hang, sanding and flexibility. Very suited for MDF. Allround AC primer with good hiding power and excellent sanding properties. Very fast curing AC primer with excellent sanding properties. Thixotropic AC primer with high solid content (good filling and hiding power). Tintable with Tintflex tinters or with tinted topcoat
Fast curing topcoat with good stacking and resistant surface. NCS 0502-Y is 2150-752351.
OLD
Thix, good hang for example on indoor frames. Gl. 45or XC 211 are cheaper. Fast curing black topcoat with good stacking and resistant surface. Tinting bases where also gloss and thixotrophy can be adjusted. Structure effect by request.
Same as previous, but in high gloss.
Primer with good hiding power, filling and flexibility. Economical in price per liter. Very good hiding power and sandability. New
PU-UV fast curing primer with good filling, levelling and sandability. Fire retardant "Class 1" PU primer for wooden substrates where fire prevention is required.
PU tintable glossy topcoat with good scratch resistance. Polishing after 72h. PU tintable topcoat with good scratch resistance. For white use 210.55.25/01. New
Glossy PU-UV top-coat. Fast curing and good stackability. Good surface hardness. Fire retardant "Class 1" PU topcoat for wooden substrates where fire prevention is required.
*** *** *** ** *
New
Excellent build and sandability.
New
Good hiding power, adhesion and sandability.
New
Good hiding, filling and flexibility. Minimum swelling of wooden substrate.
New
Price optimized primer for MDF, flat panels and interior joinery (door skins).
*** *** *** *** ** ☼ ☼
New
Excellent build, surface hardness and light fastness.
Good water resistance and flexibility on MDF. Overcoat with WB and AC-topcoats.
High chemical & mechanical resistance. 01 Base is -763201 tintable by Aquaflex New New
High scratch and chemical resistance, good stacking. Gl.30 is 3225-767301. Suitable for short lines on UV primer or sealer. Best stacking. Not that good on 1K primer. Fast drying, good stacking properties; Gl.15 is 3225-766151 and IKEA 5 is 3225-763301.
New
High scratch and chemical resistance, good stacking. Can be overcoated by WB-UV clear.
Price optimized tinting bases for Aquaflex.
*** *** *** ***
New
*** ***
New
For roller priming of chipboard, hardboard and other wooden surfaces Excellent hiding and sanding properties. Prevents sweat out of parafin from MDF.
Hea kat vus, t äit vus ja häst i lihvit av.
St andar d NC- pinnavär v
AC- kr unt vär v hea lihvit avuse ja elast susega
St andar d AC- kr unt vär v
Kiir est i kuivav AC- kr unt vär v
Tiksot r oopne
Toonit av t oonim ispast ade ja pinnavär viga
Valge AC- pinnavär v
Tiksot r oopne
M ust AC- pinnavär v
Saadaval t oonid er inevat e vär vikaar t ide alusel - NCS- 2, RAL jne.
Kõr ge läige
St andar d PU- kr unt vär v
M adal lit r i hind
PU- UV kr unt vär v. Kiir est i kõvenev ja hea st aabeldat avus.
Tulekait se kr unt lakk.
Läikiv, saadaval er inevat es t oonides
Poolm at t , saadaval t oonid er inevat e vär vikaar t ide alusel - NCS- 2, RAL jne.
Läikiv PU- UV pinnavär v. Kiir est i kõvenev ja hea st aabeldat avus. Hea pinnat ugevus.
Tulekait se kr unt lakk.
Hea t äit vus, lihvit avus ja pinnat ugevus.
Hea lihvit avus, adhesioon ja st aabeldat avus.
Hea niiskuskindlus ja elast sus - sobib köögi- ja vannit oam ööbli viim ist lem iseks. Sobib WB- ja AC- pinnavär vide alla.
Hea niiskuskindlus ja elast sus - sobib köögi- ja vannit oam ööbli viim ist lem iseks. Sobib WB- ja AC- pinnavär vide alla.
Hea pinnat ugevus.
Kõr ge keem ilse ja m ehhaanilise vast upidavusega WB- UV- vär v, sobib st aabeldam iseks kohe peale kuivat am ist .
Kiir est i kuivav, häst i st aabeldat av
Kiir est i kuivav, häst i st aabeldat av
Kiir est i kuivav, häst i st aabeldat av
Saadaval er inevat es t oonides
Puit laast plaadi, har dboar di ja t eist e puit pindade paht eldam iseks
Väga hea lihvit avus
Excellent hiding after UV primer or sealer. IKEA 5 is -762001 and -763001. Suitable for wood and MDF/HDF.
Ample and resistant surface. Gl.25 is 4350-762251. New IKEA vers. 4350-777251.
For industrial use only. This information is advisory and not legally binding. The statements are based on our present knowledge showing without any obligation the applications of our products. We recommend that you make tests to determine the suitability of a product for your particular purpose prior to use.
Better flow with pre-heating.
UV- kõvenev kr unt vär v pihust am iseks. Sobib puit - , M DF/ HDF pindadele.
Saadaval er inevad t oonid ja läiked
UV-products for Parquet 3500-001001 IS 643 0635-300009 IF 483 0515-001009 IF 483 133.91 IF 483 4020-001001 IS 483 133.00 IS 483 4140-008001 IL 483 233.04.25 IL 483 4140-002901 IL 483 4140-005101 IS 483
WB UV ADHESION SEALER (71437-46624)
20 L
SWE
W-W UV PUTTY RUSTIC (70520-57391)
20 L
SWE
UV FILLER T (70520-57325)
20 L
SWE
UV PUTTY (70520-13391)
25 KG
ITA
W-W UV SEALER (71437-57395)
20 L
SWE
UV SEALER (71437-13300)
25 KG
ITA
W-W UV TOPCOAT (71437-57597)
20 L
SWE
UV MAT TOPCOAT
25 KG
ITA
W-W UV GLOSSY TOPCOAT
20 L
SWE
UV-OIL (71437-97104)
20 L
SWE
*** ☼ *** ☼ *** ☼ *** ☼ ☼ ☼
For industrial use only. This information is advisory and not legally binding. The statements are based on our present knowledge showing without any obligation the applications of our products. We recommend that you make tests to determine the suitability of a product for your particular purpose prior to use.
Improves adhesion on parquet made from exotic woods, less grain raising and good wetting by staining.
Dual-cure handputty for deeper damages and knots. Very good filling properties. Excellent filling and very transparent (good on dark woods). Good abrasion resistance. Used as just gelled adhesion sealer. Excellent wetting, good transparency and abrasion ("coin rest") resistance.
Gives very good abrasion resistance S-39 with good filling and transparency. Al Oxyde sealer gives very good Taber test results (wear resistance). Good transparency and wetting. Excellent abrasion (scratch) resistance. Good flow, hiding damages. Gloss stable. Good flow, superior hardness and mar resistance. Excellent chemical resistance. Also Gl.10 Good chemical and mar resistance. Can be added to other UV topcoats to increase gloss. Monomer free oil for roller-brushing-curing-stacking technology.
Products for glass IL 610, IC 610 - waterborne, 1-component 203.60.15 IL 610 WB LACQUER TEXTURED Gl.15 IL 650, IC 650 - waterborne polyurethane, 2-component 203.50.15 IL 650 WB PU LACQUER TEXTURED 203.50.15/01 IC 610 WB PU TOP COAT WHITE TEXTURED
25 KG
ITA
***
Sprayable textured lacquer for glass. Good adhesion on glass. Tintable with WB tinters.
25 KG
ITA
Sprayable WB-PU textured lacquer for glass. Good chemical resitance. Suitable for bathroom furniture.
25 KG
ITA
*** ***
WB-PU-s give better water resistance than 1K WB glass products.
For industrial use only. This information is advisory and not legally binding. The statements are based on our present knowledge showing without any obligation the applications of our products. We recommend that you make tests to determine the suitability of a product for your particular purpose prior to use.
Excellent adhesion on glass. Can be tinted with max. 15% WB tinters.
Hardeners HW 200 - hardeners for acid curing products 7200-003001 HW 200 HARDENER (70871-00870) 7200-002001 HW 200 HARDENER (70871-00802)
10/25 L
SWE
10 L
SWE
** ☼
Standard AC hardener for spray application or for curtain coater application.
*** *** *** *** *** *** *** ** ** ** *** * ☼ ☼ ☼ ☼ ☼ ☼
This hardener can also be used for isolating of pinewood knots before priming.
Slower hardener what can be used also for el.stat spraying or for roller coating.
HW 500, HW 650 - hardeners for polyurethane and waterborne polyurethane products
7000-012009 70871-01104 7000-008009 303.01 7000-007009 310.48 310.70 310.84 315.90 310.91 314.93 310.42 315.99 315.86 315.15 315.10 314.36 310.13
HW 500 HW 500 HW 650 HW 650 HW 500 HW 500 HW 500 HW 500 HW 500 HW 500 HW 500 HW 500 HW 500 HW 500 HW 500 HW 500 HW 500 HW 500
D-DUR HARDENER (70871-01085) D-DUR PUTTY HARDENER
5/ 12 L
ITA
0,6 L
ITA
HARDENER (70871-55933)
5 L
HARDENER (701950-30301)
2,5 KG
SWE
HARDENER (70871-55930)
5 L
SWE
HARDENER (71950-00048)
5 L
ITA
HARDENER (71950-03270)
5/ 12,5 L
ITA
HARDENER (71950-03284)
5/ 12,5 L
ITA
HARDENER (71950-03290)
5/ 12,5 L
ITA
HARDENER (71950-03291)
12,5 L
ITA
HARDENER (71950-03293)
12,5 L
ITA
HARDENER (71950-03296)
12,5 L
ITA
HARDENER
12,5 L
ITA
HARDENER (71950-03286)
12,5 L
ITA
HARDENER (71957-03215)
5/ 12,5 L
ITA
HARDENER (71950-03310)
5 L
ITA
HARDENER
2,5 L
ITA
HARDENER
12,5 L
ITA
ITA
For industrial use only. This information is advisory and not legally binding. The statements are based on our present knowledge showing without any obligation the applications of our products. We recommend that you make tests to determine the suitability of a product for your particular purpose prior to use.
Hardener for exterior WB-PU products. Hardener for interior WB-PU lacquers. Duaden 25 hardener. Not yellowing and flexible hardener for PU Acrylic lacquers. Slow. Non yellowing hardener what gives excellent flow and good gloss. Medium-fast. Universal and yellowing type of hardener. Medium-fast. Yellowing type of hardener what improves filling properties. Medium. Yellowing type of hardener for faster drying, but reduces flexibility. Fast. Non yellowing hardener for closed pore finishing, excellent flow. Medium-fast. Yellowing type of hardener for MDF. Medium. Hardener for glossy products. Excellent flow. Slow. Slow hardener suitable also for glossy products. Yellowing PU Isolante hardener with excellent flow. Very slow. Hardener for 211.57.35 PU Parquet lacquer. Medium. Hardener for PU-NC lacquer 1.433.9601 Hardener for long potlife PU products what gives good elasticity, but slower drying.
Thinners TW 100 - thinners for nitrocellulose products 950.02 TW 100 THINNER (71936-01202) 50800-00070 TW 100 THINNER TW 200 - thinners for acid curing products 6500-025001 TW 200 THINNER (62259) 6500-002001 TW 200 THINNER (62110) 6500-004001 TW 200 THINNER (62112) 50803-00011 TW 200 THINNER 50803-00155 TW 200 THINNER TW 400 - thinners for UV products 50803-09068 TW 400 THINNER 6500-009001 TW 400 REACTIVE UV-THINNER TW 500 - thinners for polyurethane products 50800-09148 TW 500 THINNER 50803-00218 TW 500 THINNER 70800-09193 TW 500 THINNER 910.73 TW 500 THINNER (71936-03073) 910.17 TW 500 THINNER (71936-03217) 910.22 TW 500 THINNER (71936-02202) 910.04 TW 500 THINNER 910.05 TW 500 THINNER
25 L
ITA
1 L
EST
25/200 L
SWE
25/200 L
SWE
25/200 L
SWE
20/195 L
EST
20/195 L
EST
20 L
EST
20 L
SWE
20 L
EST
20 L
EST
20 L
FIN
25 L
ITA
5/25 L
ITA
25 L
ITA
25 L
ITA
25 L
ITA
TW 600 - cleaning thinners for waterbased products 8500-070001 TW 600 THINNER MAKZOCLEAN 25 8500-069001 TW 600 THINNER AKZOCLEAN 25
L
SWE
L
SWE
** ☼
Medium thinner for Italian NC products. Can also be used with ST 770 stain concentrates.
*** *** *** ** **
Fast aromatic free thinner for NC and AC products.
Special additive (1-1,5%) to slower NC products drying in hot and humid conditions to avoid whitening deffect.
Slow aromatic free thinner for AC and NC products, for electrostatic spraying. Improves AC products drying with IR lamps. Aromatic free medium thinner for AC and NC products. Standard medium-fast thinner for AC and NC products. Medium-slow thinner for AC and NC products. Can be used also for electrostatic spraying.
☼ ☼
*** ** ** *** *** *** ☼ ☼
*** **
Used for cleaning of UV-equipment. Used if UV product viscosity is too high.
Slow aromatic free thinner for D-DUR. Gives prolonged pot life. Universal slow thinner for PU products. May be used also with NC products, if extremly slow drying is demanded. Thinner for D-DUR products, special for electrostatic spraying. Medium-slow thinner for PU products. Medium-fast thinner for Italian PU products. Slow thinner for PU products. NEW
Thinner for long potlife PU products.
NEW
Thinner for dual cure PU products.
NEW
Thinner for cleaning automated lines where is used WB products. Suitable also for solvent based products. Concentrate. Good cleanining properties.
OLD
Will be replaced by Makzoclean 8500-070001.
For industrial use only. This information is advisory and not legally binding. The statements are based on our present knowledge showing without any obligation the applications of our products. We recommend that you make tests to determine the suitability
TINTFLEX SYSTEM PRODUCTS
Tinting bases and tinters for solventborne products TX 200 - acid curing interior top coat tinting bases
2150-002301 2150-751401
TX 200 TX 200
BASE 00 CLEAR (70120-47200)
16,2 L
SWE
BASE 01 WHITE (70120-47211)
18 L
SWE
TRÄFF 480 BASE 00 (70120-53490)
9,7 L
SWE
TRÄFF 480 BASE 01 (70120-53492)
10,8 L
SWE
*** ***
TX 220 - acid curing interior top coat tinting bases
2150-004901 2150-772901
TX 220 TX 220
*** ***
TX 500 - polyurethane interior top coat tinting bases
689.55.30 689.55.30/01
TX 500 TX 500
BASE 00 (71655-00000)
9 / 16,2 L
ITA
BASE 01 (71655-00021)
9 / 18 L
ITA
BASE 00 (71256-00000)
9 L
ITA
BASE 01 (71256-00021)
9 L
ITA
*** ***
TX 501 - polyurethane interior top coat tinting bases
689.56.99 689.56.99/01
TX 501 TX 501
*** ***
XC 500 - polyurethane exterior top coat tinting bases
2675-003251 2675-755251
XC 500 XC 500
D-DUR BASE 00 CLEAR (70132-58902)
16,2 L
SWE
D-DUR BASE 01 WHITE (70132-58909)
18 L
SWE
COLORANT N100 (8800100) (70837-13100)
2,5 L
ITA
COLORANT N110 (8800110) (70837-13110)
2,5 L
ITA
COLORANT N111 (8800111) (70837-13111)
2,5 L
ITA
COLORANT Y120 (8800120) (70837-13120)
2,5 L
ITA
COLORANT Y122 (8800122) (70837-13122)
2,5 L
ITA
COLORANT Y123 (8800123) (70837-13123)
2,5 L
ITA
COLORANT Y126 (8800126) (70837-13126)
2,5 L
ITA
COLORANT Y127 (8800127) (70837-13127)
2,5 L
ITA
COLORANT R130 (8800130) (70837-13130)
2,5 L
ITA
COLORANT R135 (8800135) (70837-13135)
2,5 L
ITA
COLORANT R142 (8800142) (70837-13142)
2,5 L
ITA
COLORANT R144 (8800144) (70837-13144)
2,5 L
ITA
COLORANT B150 (8800150) (70837-13150)
2,5 L
ITA
COLORANT B154 (8800154) (70837-13154)
2,5 L
ITA
COLORANT B160 (8800160) (70837-13160)
2,5 L
ITA
COLORANT G180 (8800180) (70837-13180)
2,5 L
ITA
*** ***
Tinters for solventborne top coats
8050-750009 8050-600009 8050-601009 8050-500009 8050-501009 8050-502009 8050-503009 8050-504009 8050-508009 8050-251009 8050-252009 8050-253009 8050-200009 8050-201009 8050-150009 8050-450009
TI 100 TI 100 TI 100 TI 100 TI 100 TI 100 TI 100 TI 100 TI 100 TI 100 TI 100 TI 100 TI 100 TI 100 TI 100 TI 100
*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
For industrial use only. This information is advisory and not legally binding. The statements are based on our present knowledge showing without any obligation the applications of our products. We recommend that you make tests to determine the suitability
Tinting bases and tinters for waterborne products XC 610 - waterborne exterior topcoat tinting bases
5275-005251 5275-761251
XC 610 XC 610
*** ***
US-A 325 BASE 00 (71254-46492)
18 L
SWE
US-A 325 BASE 01 (71254-46493)
10,8 L
SWE
AQUA INTERIOR OP BAS 00 (70228-46440)
10,8 L
SWE
AQUA INTERIOR OP BAS 01 (70228-46465)
10,8 L
SWE
SUPERCRYL TX 01 BASE
10,8 L
SWE
SUPERCRYL TX 00 BASE
10,8 L
SWE
** ** *** ***
18/200 L
SWE
***
AQUAFL. COL. AN102 (70837-58102)
3 L
SWE
AQUAFL. COL. AN112 (70837-58112)
3 L
SWE
AQUAFL. COL. AN114 (70837-58114)
3 L
SWE
AQUAFL. COL. AY121 (70837-58121)
3 L
SWE
AQUAFL. COL. AY125 (70837-58125)
3 L
SWE
AQUAFL. COL. AY128 (70837-58128)
3 L
SWE
AQUAFL. COL. AR131 (70837-58131)
3 L
SWE
AQUAFL. COL. AR136 (70837-58136)
3 L
SWE
AQUAFL. COL. AR143 (70837-58143)
3 L
SWE
AQUAFL. COL. AR145 (70837-58145)
3 L
SWE
AQUAFL. COL. AB155 (70837-58155)
3 L
SWE
AQUAFL. COL. AB161 (70837-58161)
3 L
SWE
AQUAFL. COL. AG181 (70837-58181)
3 L
SWE
*** *** *** *** *** *** *** *** *** *** *** *** ***
IC 610 - waterborne interior topcoat tinting bases
3225-002301 3225-758301 3225-776351 3225-008351
IC 610 IC 610 IC 610 IC 610
New New
Base for wood impregnation sealer
5000-005001
XS 600
IND.PINOTEX WB CLEAR (70828-09000)
Tinters for waterborne top coats
8000-750009 8000-602009 8000-603009 8000-504009 8000-505009 8000-506009 8000-541009 8000-255009 8000-256009 8000-257009 8000-202009 8000-153009 8000-450009
TI 600 TI 600 TI 600 TI 600 TI 600 TI 600 TI 600 TI 600 TI 600 TI 600 TI 600 TI 600 TI 600
For industrial use only. This information is advisory and not legally binding. The statements are based on our present knowledge showing without any obligation the applications of our products. We recommend that you make tests to determine the suitability
STAINFLEX Stains
75546-xxxxx 70891-xxxxx 70825-xxxxx
ST 711 ST 910 ST 760
STAINFLEX PIGMENTED STAIN
5/10 L
EST
STAINFLEX STAIN
5/10 L
EST
STAINFLEX STAIN AQUA
5/10 L
EST
*** *** ***
Solventborne stain with micronized pigments.
*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
Tinter for SB stain.
Solventborne stain based on stain concentrates. Waterborne stain based on stain concentrates.
STAINFLEX Tinters and Base (ex TINTEX Stain Tinters and Base)
8050-506009 8050-302009 8050-604009 8050-254009 8050-507009 8050-451009 8050-151009 8050-751009 8050-001009 8200-601001 8200-503001 8200-301001 8200-504001 8200-252001 8200-250001 8000-752001 8200-506001 8200-150001 8500-031001
TI 711 TI 711 TI 711 TI 711 TI 711 TI 711 TI 711 TI 711 TI 711 TI 910 TI 910 TI 910 TI 910 TI 910 TI 910 TI 911 TI 911 TI 911 TI 911
SY23 YELLOW (70837-58048)
1 L
SWE
SY27 BROWN (70837-58049)
1 L
SWE
SN11 BLACK (70837-58050)
1 L
SWE
SR41 RED (70837-58051)
1 L
SWE
S031 ORANGE (70837-58052)
1 L
SWE
SG81 GREEN (70837-58053)
1 L
SWE
SB61 BLUE (70837-58054)
1 L
SWE
SW01 WHITE (70837-58055)
1 L
SWE
SC91 CLEAR (70837-58057)
1 L
SWE
STAIN CONC SN15 BLACK (5190)
1/5 L
SWE
STAIN CONC SY18 REDDISH YELLOW (5191)
1/5 L
SWE
STAIN CONC SY19 BROWN (5194)
1/5 L
SWE
STAIN CONC SY33 ORANGE (5192)
1/5 L
SWE
STAIN CONC SR40 RED (5193)
1/5 L
SWE
STAIN CONC SR50 BORDEAUX (5195)
1 L
SWE
STAIN CONC SW02 WHITE (70837-58095)
5 L
SWE
STAIN CONC SY17 YELLOW
1 L
SWE
STAIN CONC SB65 BLUE (70837-58096)
1 L
SWE
STAIN ADDITIVE SC93 (70837-58097)
5 L
SWE
Tinter for SB stain. Tinter for SB stain. Tinter for SB stain. Tinter for SB stain. Tinter for SB stain. Tinter for SB stain. Tinter for SB stain. Additive for SB stain. Stain concentrate for SB and WB stain. Stain concentrate for SB and WB stain. Stain concentrate for SB and WB stain. Stain concentrate for SB and WB stain. Stain concentrate for SB and WB stain. Stain concentrate for SB and WB stain. Stain concentrate for WB stain. Stain concentrate for WB stain. Stain concentrate for WB stain. Additive for WB stain.
STAINFLEX Stain Bases
50800-00101 50800-00202 6000-003011 6000-001021
ST 711 ST 711 ST 911 ST 911
STAINFLEX STAIN BASE STAINFLEX STAIN BASE AQUA STAIN CLEAR BASE AQUA STAIN CLEAR BASE SPRAY
195 L
EST
195 L
EST
20 / 1000 L
SWE
20 L
SWE
*** *** *** ***
Solventborne stain base. Solventborne stain base with ethanol content 10%. New
WB stain base for roller and flow coat application
New
WB stain base for spray application
STAIN Concentrates
1.604.3005 1.604.3015 1.604.3025 1.604.3035 1.604.3045 1.604.3055 1.604.3065 1.604.3075 1.604.3085 1.604.3105 889.20/13 889.20/07 889.20/28 889.20/06 889.20/09
ST 770 ST 770 ST 770 ST 770 ST 770 ST 770 ST 770 ST 770 ST 770 ST 770 ST 770 ST 770 ST 770 ST 770 ST 770
STAIN CONC. MAHOGANY (71604-03005)
5 L
ITA
STAIN CONC. PINE (71604-03015)
5 L
ITA
STAIN CONC. WALNUT (71604-03025)
5 L
ITA
STAIN CONC. LIGHT PINE (71604-03035)
5 L
ITA
STAIN CONC. DARK OAK (71604-03045)
5 L
ITA
STAIN CONC. LIGHT OAK (71604-03055)
5 L
ITA
STAIN CONC. CHERRY (71604-03065)
5 L
ITA
STAIN CONC. RED (71604-03075)
5 L
ITA
STAIN CONC. BORDEAUX (71604-03085)
5 L
ITA
STAIN CONC. SANDALWOOD (71604-03105)
5 L
ITA
STAIN CONC. RED WALNUT (71889-02013)
5 L
ITA
STAIN CONC. SKY BLUE 7249 (71889-02007)
5 L
ITA
STAIN CONC. ROSEWOOD (71889-02028)
5 L
ITA
STAIN CONC. GREEN 6248 (71889-02006)
5 L
ITA
STAIN CONC. BLACK (71889-02009)
5 L
ITA
*** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
950.02
TW 100
THINNER (71936-01202)
25 L
ITA
***
Solventborne stain base for ST 770 concentrates.
Patina 888.51/0151 889.01/3373
ST 765 ST 715
PATINA WB WALNUT (71885-10151)
5 L
ITA
10 L
ITA
*** ***
Antique look.
PATINA SB WALNUT (71889-13373)
Base
For industrial use only. This information is advisory and not legally binding. The statements are based on our present knowledge showing without any obligation the applications of our products. We recommend that you make tests to determine the suitability
Antique look.
Putties for exterior joinery 0840-750001 XF 650 AQUA PU FILLER (550-75000) 6025326 XF 300 WOODFILL (70542-67214) 0800-750009 XF 500 D-DUR PUTTY WHITE (70542-01103)
Other exterior joinery products 6003511 AW 600 KODRIN WV 470 (70542-47000) 5005800 AW 600 KODRIN WV 456 (70542-45600) 33999-66035 AW 600 MAINTENANCE KIT FOR EXT. JOINERY 6003251 AW 600 PFLEGESET (70936-03251)
Interior putties 0840-751001 IF 600
Special effects 590.01/28 IC 001 590.01/24 IC 001
*** *** ***
Good adhesion on wood, gives isolation of resinous areas and knots of pinewood. Good filling and sanding properties. No loss of volume while curing. Applied by Woodfill dozingpistol 6025325 (53999-60125).
Stops the updake of water through V-joints. High elasticity, excellent adhesion to wood and primers. Quick drying.
GER
☼ ☼ ☼ ☼
SWE
☼
Designed for application by extruder. Developed for filling finger joints on mouldings.
☼ ☼
Metallic effect paint which can be overcoated by NC or PU lacquers.
☼ ☼ ☼
Accentuates the wood structure. Can be used in contact with food stuff.
12 L
NL
0,82 L
NL
3/12 L
NL
0,32 L
GER
0,25/ 0,75 L
GER
PCS 2x250 mL PCS
ITA
AQUA LINE FILLER
200 L
SILVER METALLIC
10 L
ITA
GOLDEN METALLIC
10 L
ITA
Oils 8500-001001 1000-004009 1000-003009
IS 002 IS 002 IS 002
PINEWOOD OIL (70416-01700)
Waxes 3000-012001 3000-010001
IS 610 IS 610
AQUA WAX 2328
20 L
SWE
AN-TEAK OIL
5 L
SWE
FINISHING OIL
5 L
SWE
1000 L
SWE
20 L
SWE
AQUA TEX
☼ ☼
For industrial use only. This information is advisory and not legally binding. The statements are based on our present knowledge showing without any obligation the applications of our products. We recommend that you make tests to determine the suitability of a product for your particular purpose prior to use.
On bare wood use as 2K putty. For filling small holes on primer can be used as 1K.
Deters the updake of water in the endgrain. Excellent adhesion to wood and primers. Quick drying. Contains renewer XS 600, restorer XV 600, brush, sanding pad, rubber gloves and soft cloth.
2- kom p. polüur et aan paht el. Sobib D- DUR vär vi ja kr undiga. Viim ist lem at a puidul kasut a 2- kom ponent sena. Väikest e vigast ust e par andam iseks kr unt vär vil võib kasut ada 1- kom ponent sena.
2- kom p. polüur et aan paht el. Sobib D- DUR vär vi ja kr undiga. Viim ist lem at a puidul kasut a 2- kom ponent sena. Väikest e vigast ust e par andam iseks kr unt vär vil võib kasut ada 1- kom ponent sena.
Tum edat e puidulikide ( t eak, palisander jne) õlit am iseks. NB! O ksüdat ivselt kuivav t oode - isesüt t im ise oht .
Tum edat e puidulikide ( t eak, palisander jne) õlit am iseks. NB! O ksüdat ivselt kuivav t oode - isesüt t im ise oht .
Kom plekt i kuulub hooldusvahend, par anduslakk, pint sel, lihvpadi, kum m ikindad ja pehm e lapp.
First use special cleaner for surface. After complete drying apply maintenance milk with a cloth.
Tum edat e puidulikide ( t eak, palisander jne) õlit am iseks. NB! O ksüdat ivselt kuivav t oode - isesüt t im ise oht .
M et allik ef ekt vär v
Metallic effect paint which can be overcoated by NC or PU lacquers.
Ample oil for surface treatment of dark types of wood (e.g. teak and palisander). Gives mat and smooth surface. For after treatment and maintenance of lacquered surfaces. Gives nice deep outlook.
More resistant alternative to oil tratment of stained pinewood. Can be overcoted by clear wax. Can be tinted by UV stain concentrates.
Polishable fast drying wax gives rustic water repellant surface. 5% of used binder containing stain can be added.
Tum edat e puidulikide ( t eak, palisander jne) õlit am iseks. NB! O ksüdat ivselt kuivav t oode - isesüt t im ise oht .
Tum edat e puidulikide ( t eak, palisander jne) õlit am iseks. NB! O ksüdat ivselt kuivav t oode - isesüt t im ise oht .
Lakit ud pindade jär elt ööt lem iseks või vär skendam iseks. NB! O ksüdat ivselt kuivav t oode - isesüt t im ise oht .
Tum edat e puidulikide ( t eak, palisander jne) õlit am iseks. NB! O ksüdat ivselt kuivav t oode - isesüt t im ise oht .
Tum edat e puidulikide ( t eak, palisander jne) õlit am iseks. NB! O ksüdat ivselt kuivav t oode - isesüt t im ise oht .
Additives Additives for solventborne products
8500-040001 8500-035001 8500-032001 789.78
AW 200 AW 200 AW 400 AW 500
MATTING PASTE (70870-00501)
5 L
SWE
TIX PASTE (70870-00665)
5 L
SWE
UV MATTING PASTE (70870-00431)
5 L
SWE
MATTING PASTE (70870-78978)
5 KG
ITA
*** *** *** ***
5 L
SWE
***
*** *** *** ***
Matting agent for NC and AC products. Thixotropic paste for NC and AC products. Matting agent for UV products. Matting agent for PU products.
Additives for waterbased products
8500-021001
AW 600
DEFOAMER FOR WB (70870-00732)
Additives both for solventborne and waterborne products
70838-06000 70838-07000 70838-05378 70838-05380
AW 200 AW 200 AW 200 AW 200
FLONAC MS-10
25 KG
FIN
FLONAC MS-20
25 KG
FIN
TEXTURE 5378W (25 MICR)
68,04 KG
DEN
TEXTURE 5380W (40 MICR)
68,04 KG
DEN
Colour charts
33999-80001 8520-000419-000 8520-000369-000 8520-000531-000 8520-000541-000
XS 600 CARD
PCS
EST
NCS CASCADE 980 COLORCHART (33999-78830)
PCS
SWE
RAL COLORCHART (33999-78824)
PCS
SWE
NORDIC EFFECT COLORCHART
PCS
SWE
STAINFLEX COLOR CHART
PCS
SWE
*** *** *** *** ***
For industrial use only. This information is advisory and not legally binding. The statements are based on our present knowledge showing without any obligation the applications of our products. We recommend that you make tests to determine the suitability
Silver perlescent powder Golden perlescent powder Texture powder with average grid size 25 microns. Texture powder with average grid size 40 microns.
RUS
EST
ПЕРЕЧЕНЬ ПРОДУКТОВ
TOOTEVALIK
XS 002, XS 600 - Деревозащитные средства
XS 002, XS 600 - Puidukaitsevahendid
Varnishes
Лаки наружного применения
Lakid välistingimustesse
XV 500 - polyurethane
XV 500 - polyurethane
XV 500 - полиуретановый
XV 500 - polüuretaan
XV 600, XV 610 - waterborne
XV 600, XV 610 - waterborne
XV 600, XV 610 - водоразбавляемые
XV 600, XV 610 - vesialusel
Exterior primers and topcoats
Exterior primers and topcoats
Грунтовки и финишные краски наружного применения
Krunt- ja pinnavärvid välistingimustesse
XP 500 - polyurethane primer
XP 500 - polyurethane primer
XP 500 - полиуретановый грунт
XP 500 - polüuretaan kruntvärv
COPY
ENG
PRODUCT MIX PRODUCT MIX XS 002, XS 600 - Wood preservatives
XS 002, XS 600 - Wood preservatives
Varnishes
XC 500 - polyurethane topcoats
XC 500 - polyurethane topcoats
XC 500 - полиуретановые краски
XC 500 - polüuretaan pinnavärvid
XP 600, XP 610, XP 650 - w aterborne primers
XP 600, XP 610, XP 650 - waterborne primers
XP 600, XP 610, XP 650 - водоразбавляемые грунты
XP 600, XP 610, XP 650 - vesialuselised kruntvärvid
XC 610 - waterborne topcoats
XC 610 - waterborne topcoats
XC 610 - водоразбавляемые краски
XC 610 - vesialuselised pinnavärvid
Interior putties, sealers and lacquers
Interior putties, sealers and lacquers
Шпатлѐвки, грунты и лаки для внутрикомнатного использования
Pahtlid, krunt- ja pinnalakid sisetingimustesse
IS 100 - nitrocellulose sealers
IS 100 - nitrocellulose sealers
IS 100 - нитроцеллюлозные грунт-лаки
IS 100 - nitrotselluloos kruntlakid
IL 100 - nitrocellulose lacquers
IL 100 - nitrocellulose lacquers
IL 100 - нитроцеллюлозные лаки
IL 100 - nitrotselluloos lakid
IS 200 - acid curing sealers
IS 200 - acid curing sealers
IS 200 - грунт-лаки кислотного отверждения
IS 200 - happekõvenevad kruntlakid
IL 200 - acid curing lacquers
IL 200 - acid curing lacquers
IL 200 - лаки кислотного отверждения
IL 200 - happekõvenevad pinnalakid
IS 500 - polyurethane sealers
IS 500 - polyurethane sealers
IS 500 - полиуретановые грунт-лаки
IS 500 - polüuretaan kruntlakid
IL 500 - polyurethane lacquers
IL 500 - polyurethane lacquers
IL 500 - полиуретановые лаки
IL 500 - polüuretaan lakid
IL 610, 640, 650 - waterborne lacquers
IL 610, 640, 650 - waterborne lacquers
IL 610, IL 640, 650 - водоразбавляемые лаки
IL 610, IL 640, 650 - vesialuselised lakid
UV-curing putties, sealers and lacquers
UV-curing putties, sealers and lacquers
Шпатлѐвки, грунты и лаки УФ-сушки
UV-kuivavad pahtlid, krunt- ja pinnalakid
Interior putties, primers and topcoats
Interior putties, primers and topcoats
Шпатлѐвки, грунты и краски для внутрикомнатного использования
Pahtlid, krunt- ja pinnavärvid sisetingimustesse
IC 100 - nitrocellulose topcoats
IC 100 - nitrocellulose topcoats
IC 100 - нитроцеллюлозные краски
IC 100 - nitrotselluloosvärvid
IP 200 - acid curing primers
IP 200 - acid curing primers
IP 200 – грунтовки кислотного отверждения
IP 200 - happekõvenevad kruntvärvid
IC 200, IC 220 - acid curing topcoats
IC 200, IC 220 - acid curing topcoats
IC 200, IC 220 - краски кислотного отверждения
IC 200, IC 220 - happekõvenevad pinnavärvid
IP 500 - polyurethane primers
IP 500 - polyurethane primers
IP 500 - полиуретановые грунтовки
IP 500 - polüuretaan kruntvärvid
IC 501 - polyurethane topcoats
IC 501 - polyurethane topcoats
IC 501 - полиуретановые краски
IC 501 - polüuretaan pinnavärvid
IP 610, 640, 650 - waterborne primers
IP 610, 640, 650 - waterborne primers
IP 610, 640, 650 - водоразбавляемые грунтовки
IP 610, 640, 650 - vesialuselised kruntvärvid
IC 610, 640, 650 - waterborne topcoats
IC 610, 640, 650 - waterborne topcoats
IC 610, 640, 650 - водоразбавляемые краски
IC 610, 640, 650 - vesialuselised pinnavärvid
IP 400 - UV-curing primer
IP 400 - UV-curing primer
IP 400 - грунтовка УФ-сушки
IP 400 - UV-kuivav kruntvärv
IC 400 - UV-curing topcoat
IC 400 - UV-curing topcoat
IС 400 - краска УФ-сушки
IC 400 - UV-kuivav pinnavärv
Putties for exterior joinery
Putties for exterior joinery
Шпатлѐвки для наружных окон и дверей
Pahtlid aknatööstusele
TINTEX Красители
TINTEX Peitsid
TINTEX Stains TINTEX Stains Furniture oil and wax
Furniture oil and wax
Мебельные масла и воски
Mööbliõlid ja vahad
Hardeners
Hardeners
Отвердители
Kõvendajad
Thinners
Thinners
Разбавители
Lahustid
Другие продукты
Lisatooted
TINTEX SYSTEM PRODUCTS
ПРОДУКТЫ ТОНИРОВОЧНОЙ СИСТЕМЫ TINTEX
TINTEX SÜSTEEMI TOOTED
Tinting bases and tinters for solventborne products
Тонировочные базовые краски и тонеры для продуктов на основе разбавителей
Lahustibaasiliste toodete toonimispõhjad ja toonerid
TX 200 - acid curing interior top coat tinting bases
TX 200 - тонировочные базы красок кислотного отверждения внутрикомнатного использования TX 200 - happekõvenev pinnavärv sisetingimustesse, toonimispõhjad
TX 500 - polyurethane interior top coat tinting bases
TX 500 - тонировочные базы полиуретановых красок внутрикомнатного использования
TX 500 - polüuretaan pinnavärv sisetingimustesse, toonimispõhjad
TX 501 - polyurethane interior top coat tinting bases
TX 501 - тонировочные базы полиуретановых красок внутрикомнатного использования
TX 501 - polüuretaan pinnavärv sisetingimustesse, toonimispõhjad
XC 500 - polyurethane exterior top coat tinting bases
XC 500 - тонировочные базы полиуретановых красок наружного применения
XC 500 - polüuretaan pinnavärv välistingimustesse, toonimispõhjad
Tinters for solventborne top coats
Тонеры для тонировочных базовых красок на основе разбавителей
Lahustibaasiliste toodete toonerid
Tinting bases and tinters for waterborne products
Тонировочные базовые краски и тонеры для водоразбавляемых продуктов
Vesialuseliste toodete toonimispõhjad ja toonerid
XC 610 - waterborne exterior topcoat tinting bases
XC 610 - тонировочные базы водоразбавляемых красок наружного применения
XC 610 - vesialuseline pinnavärv välistingimustesse, toonimispõhjad
IC 610 - waterborne interior topcoat tinting bases
IC 610 - тонировочные базы водоразбавляемых красок внутрикомнатного использования IC 610 - vesialuseline pinnavärv sisetingimustesse, toonimispõhjad
Tinters for waterborne top coats
Tinters for waterborne top coats
Тонеры для тонировочных базовых водоразбавляемых красок
Vesialuseliste toodete toonerid
TINTEX Stain Tinters and Base
TINTEX Stain Tinters and Base
Тонеры красителя TINTEX Stain и базы
TINTEX peitsi toonerid ja toonimispõhjad
TINTEX Stain Tinters
TINTEX Stain Tinters
Тонеры красителя TINTEX Stain
TINTEX peitsi toonerid
TINTEX Stain Bases
TINTEX Stain Bases
Базы красителя TINTEX Stain
TINTEX peitsi toonimispõhjad
Additives
Additives
Модифицирующие добавки
Lisandid
Additives for solventborne products
Additives for solventborne products
Добавки для продуктов на основе разбавителей
Lisandid lahustibaasilistele toodetele
Additives both for solventborne and waterborne products
Добавки для продуктов на основе разбавителей и водоразбавляемых продуктов
Lisandid lahustibaasilistele ja vesialuselistele toodetele
Hardware for TINTEX SYSTEM
Оборудование для тонировки
TINTEX SÜSTEEMI seadmed
Tinting machines Tinting machines
Тонирующие машины
Toonimismasinad
Shaker Colour charts
Шейкер Цветовые карты для красок и красителей Тонеры и база деревозащитного средства Тонеры для деревозащитного средства База деревозащитного средства Перспективные продукты
Raputi Värvikaardid Puidukaitsevahendi toonerid ja toonimispõhi Puidukaitsevahendi toonerid Puidukaitsevahendi toonimispõhi Perspektiivsed tooted
Other products Other products TINTEX SYSTEM PRODUCTS Tinting bases and tinters for solventborne products
TX 200 - acid curing interior top coat tinting bases
TX 500 - poly urethane interior top coat tinting bases
TX 501 - poly urethane interior top coat tinting bases
XC 500 - poly urethane exterior top coat tinting bases
Tinters for solventborne top coats
Tinting bases and tinters for waterborne products
XC 610 - waterborne exterior topcoat tinting bases
IC 610 - waterborne interior topcoat tinting bases
Additives both for solventborne and waterborne products
Hardware for TINTEX SYSTEM
Tinters and base for w ood impregnation sealer
Tinters for wood impregnation sealer
Base for wood impregnation sealer
Prospective products
Shaker Colour charts Tinters and base for wood impregnation sealer Tinters for wood impregnation sealer Base for wood impregnation sealer Prospective products
For industrial use only. This information is advisory and not legally binding. The statements are based on our present knowledge showing without any obligation the applications of our products. We recommend that you make tests to determine the suitability of a product for your particular purpose prior to use. IS 300 - polyester sealer IF 400, IP 400 - UV-curing putty, UV-curing primer UV-products for Parquet HW 200 - hardeners for acid curing products
For indust r ial use only. This inf or m at ion is advisor y and not legally binding. The st at em ent s ar e based on our pr esent knowledge showing wit hout any obligat ion t he applicat ions of our pr oduct s. We r ecom m end t hat you m ake t est s t o det er m ine t he suit abilit y of a pr oduct f or your par t icular pur pose pr ior t o use.
IS 300 - polyester sealer IF 400, IP 400 - UV-curing putty, UV-curing primer
UV-products for Parquet HW 200 - hardeners for acid curing products
HW 500, HW 650 - hardeners for polyurethane and waterborne polyurethane products
HW 500, HW 650 - hardeners for polyurethane and waterborne polyurethane products
TW 100 - thinners for nitrocellulose products TW 200 - thinners for acid curing products TW 500 - thinners for polyurethane products TINTFLEX SYSTEM PRODUCTS TINTFLEX SYSTEM PRODUCTS TX 220 - acid curing interior top coat tinting bases Stain concentrates and Base Stain concentrates and Base Concentrates Concentrates Base Base Special effects Special effects Putties for interior use Putties for interior use IF 100 - solventborne putties IF 100 - solventborne putties IF 610 - waterborne putties IF 610 - waterborne putties IS 610, 640, 650 - waterborne sealers IP 100 - nitrocellulose primer IP 100 - nitrocellulose primer Products for glass Products for glass TW 100 - thinners for nitrocellulose products
TW 200 - thinners for acid curing products
TW 500 - thinners for polyurethane products
TX 220 - acid curing interior top coat tinting bases
IS 610, 640, 650 - waterborne sealers
IL 610, IC 610 - waterborne, 1-component
IL 650, IC 650 - waterborne poly urethane, 2-component
Patina Oils
IL 610, IC 610 - waterborne, 1-component IL 650, IC 650 - waterborne polyurethane, 2-component
Patina Oils
Только для промышленного применения. Данная информация носит рекомендательный характер и не является юридически обязывающей. И поскольку конкретные условия Ainult tööstuslikuks kasutamiseks. Antud info on soovituslik производства находятся вне зоны контроля производителя, последний не может нести ega ole juriidiliselt siduv. Et viimistluse kvaliteet sõltub paljudest полной ответственности за результаты работ, на которые оказывают влияние местные meist olenematutest asjaoludest, siis vastutab selle eest toote факторы. Мы рекомендуем перед использованием провести испытания в целях kasutaja. Soovitame enne kasutamist viia läbi testid, et определения пригодности данного материала для вашей конкретной цели. otsustada, kas antud toode sobib vastavatesse tingimustesse. IS 300 - полиэфирный грунт-лак IS 300 - polüester kruntlakk IF 400, IP 400 - шпатлѐвка УФ-сушки, грунтовка УФ-сушки IF 400, IP 400 - UV-kuivav pahtel, UV-kuivav kruntvärv продукты УФ-сушки для паркета UV-tooted parketile HW 200 - отвердители для кислотных продуктов HW 200 - kõvendajad happekõvenevatele toodetele HW 500, HW 650 - отвердители для полиуретановых и водоразбавляемых полиуретановых HW продуктов 500, HW 650 - kõvendajad polüuretaan ja vesialuselistele polüuretaan toodetele TW 100 - разбавители для нитроцеллюлозных продуктов TW 100 - lahustid nitrotselluloos toodetele TW 200 - разбавители для продуктов кислотного отверждения TW 200 - lahustid happekõvenevatele toodetele TW 500 - разбавители для полиуретановых продуктов TW 500 - lahustid polüuretaan toodetele ПРОДУКТЫ ТОНИРОВОЧНОЙ СИСТЕМЫ TINTFLEX TINTFLEX SÜSTEEMI TOOTED TX 220 - кислотная краска внутрикомнатного использования, тонировочные базы TX 220 - happekõvenev pinnavärv sisetingimustesse, toonimispõhjad Концентраты красителя и база Peitsi kontsentraadid ja baas Концентраты Kontsentraadid База Baas Спецэффекты Spetsiaal efektid Шпатлѐвки для внутрикомнатного использования Pahtlid sisetingimustesse IF 100 - шпатлѐвки на основе разбавителей IF 100 - lahustibaasilised pahtlid IF 610 - водоразбавляемые шпатлѐвки IF 610 - vesialuselised pahtlid IS 610, 640, 650 - водоразбавляемые грунт-лаки IS 610, 640, 650 - vesialuselised kruntlakid IP 100 - нитроцеллюлозная грунт-краска IP 100 - nitrotselluloos kruntvärv Отделочные материалы для стекла Tooted klaasile IL 610, IC 610 - водоразбавляемые однокомпонентные IL 610, IC 610 - vesialuseline, 1-komponentne IL 650, IC 650 - водоразбавляемые, полиуретановые, двухкомпонентные IL 650, IC 650 - vesialuseline polüuretaan, 2-komponentne Патина Patina Масла Õlid
