£4.20 February 2015 ISSUE 232
5 BA-10 BRONEAVTOMOBIL
FULL
BUILDS
INSIDE THIS ISSUE
www.tamiyamodelmagazine.com
Hobbyboss’s new 1:35 BA-10 armoured car, full-build
DIG THE NEWEY BREED Revell’s 1:24 Red Bull RB8 ‘Mark Webber’, full-build
PACIFIC PIRATE Tamiya’s F4U-1A Corsair is complete!
Painting a science-fiction figure, Weathering a Tamiya T-55, plus kits, books and accessories…
p 01 CoverTMMI 232MN.indd 1
18/12/2014 09:38
Tamiya Model Magazine International Vol 230
www.hobbyco.net Find us on facebook search Tamiya UK
p 02 HobbyCo 232.indd 8
15/12/2014 10:41
BA-10 BRONEAVTOMOBIL Hobbyboss’s new 1:35 BA-10 armoured car, full-build PAGE 16
Issue 232 February 2015 EDITOR Marcus Nicholls
[email protected]
Contents 4 NEWS DESK New kit and model product news 6 PIECE ON EARTH! Time to relax, with some 1,000 piece jigsaw puzzles! DIG THE NEWEY BREED Revell’s 1:24 Red Bull RB8 ‘Mark Webber’, full-build PAGE 8
22 CONTAINS GRAPHIC DETAIL How to paint the 70mm Rogue Trooper from the 2000AD comic series 28 SOMETHING IN THE AIR TONIGHT... A selection of new and recent aircraft models from Eduard 40 NEW RELEASES ACCESSORIES New and recently issued modelling accessories 44 ANY COLOUR, SO LONG AS IT’S GREEN! Weathering one of Tamiya’s most popular armour kits, the Russian T-55 52 NEW RELEASES KITS We’re back to our normal format this month! 56 A LARGE-SCALE MEDIUM, WELL DONE! Revell’s new 1:144 United States Navy Landing Ship Medium, previewed 58 BOOK REVIEWS New scale modelling-related books, reviewed
PACIFIC PIRATE Tamiya’s 1:32 F4U-1A Corsair is complete! PAGE 30
60 DIORAMA IDEAS A well known shot of the US Army M8 Greyhound named ‘Colbert’ 64 CONTACTS Where to buy the products used and reviewed in TMMI 66 THE EDITOR’S PAGE The Editor’s thoughts on scale modelling topics
Do you live outside the UK and want Tamiya Model Magazine delivered direct to your home, anywhere in the world? Just email us at;
[email protected] Or call +44 (0)1525 222573, fax +44 (0)1525 222574 GMT Subscription rates for 1 year (12 issues) are: Within UK: £44, Europe: £56, Worldwide/USA: £69 ($108 US aprx)
Join TMMI at facebook.com!
HOW TO CONTACT US:
TELEPHONE: (UK) 01525 222573 FAX: (UK) 01525 222574 EDITORIAL EMAIL:
[email protected] ALL OTHER ENQUIRIES:
[email protected] ADDRESS: ADH Publishing,
Doolittle Mill, Doolittle Lane, Totternhoe, Bedfordshire, LU6 1QX, UK Tamiya Model Magazine is published monthly by ADH Publishing. Reproduction in part or whole of any text, photograph or illustration without written permission from the publisher is strictly prohibited. While due care is taken to ensure the contents of Tamiya Model Magazine is accurate, the publishers and printers cannot accept liability for errors or omissions.
TMMI 232 February 2015
p 03 Contents 232MN.indd 3
3
18/12/2014 09:44
Newsdesk IN BRIEF... TAMIYA 1:12 Ducati 1199 Panigale S Matte Black (Finished Model) 1:32 Raikiri (MA Chassis) 1:32 Diospada Premium (AR Chassis) 1:12 XB Lowride Pumpkin (M-06) 1:10 Raybrig NSX Concept-GT (TT-02) 1:10 R/C Tractor Kumamon Version (WR-02G) Air Control Valve hobbyco.net
If you have news of forthcoming model, armour, aircraft or car events, changes of address or just interesting information to share, please write to: TMMI Newsdesk, ADH Publishing, Doolittle Mill, Doolittle Lane, Totternhoe, Bedfordshire, LU6 1QX, UK Tel: 01525 222573 Fax: 01525 222574 Email:
[email protected]
NEW FROM TAMIYA 1:72 LOCKHEED MARTIN F-16CJ (BLOCK 50) FIGHTING FALCON W/FULL EQUIPMENT Tamiya released a new 1:72 kit of the F-16CJ last year but it wasn't issued with underwing ordnance. Now though, the kit will come with a full payload in this special edition, which will please many aircraft modellers! www.hobbyco.net
ARMA HOBBY 1:48 TS-11 Iskra bis DF armahobby.com MASTERPIECE MODELS The Corr-U-Gator masterpiecemodels. com
1:16 RC FULL-OPTION JGSDF TYPE 10 MBT We ran a small image of the 1:16 Type 10 MBT last issue and here are some factory photos of the model's details. Full review in TMMI soon! www.hobbyco.net
DRAGON MODELS 1:35 Saladin armoured car hobbyco.net HAULER 1:48 Russian AA tank T-90 (Mikromir) 1:48 British tank destroyer IIC Achilles (Tamiya) 1:35 Farm horse drawn wagon 1:35 Latrine hauler.cz PROFIL24 1:24 Porsche 906 L Le Mans 1966 profil24-models.com
The Type 10’s barrel has an auto-leveling feature.
REALITY IN SCALE 1:35 Roadside shrine 1:35 Small road section 1:35 Large factory facade 1:72 Airfield hangar realityinscale.com REVELL 1:35 GTK Boxer GTFz 1:72 Dassault Rafale M 1:72 Mirage 2000D 1:48 Jaguar Gr1 Gr3 revell.de/en SUPAFIX Supafix APX4 ultra strength adhesive and reinforcing filling powders supa-fix.com
4
A selection of views showing the Type 10’s details and mechaniscal features.
February 2015 TMMI 232
p 04-05 News 232MN.indd 4
23/12/2014 12:55
NEW FROM REVELL 1:48 F-15E STRIKE EAGLE
Revell's F-15E comes with separate air-brake flaps (open or closed), four GBU-10 Bombs, two GBU-15 Bombs, four Sidewinder guided missiles, LANTIRN pods and a detailed cockpit with ejection seats and instrument panels. www.revell.de/en
www.grandprixmodels.com
NEW FROM MENG KITS ON THE WAY!
Jorgensen-Eagle Offy – 1st Indy 500 1975 Unser 1:43 resin & metal kit by Formula Model
In the pipeline from Meng are some great new kits; 1:35 WW1 German A7V tank, 1:35 US Cougar 6X6 MRAP, 1:35 Achzarit 'Late', 1:35 US Explosives Specialists and even a set of 1:35 vending machines! www.creativemodels.co.uk
NEW FROM REVELL
1:350 USS NEW JERSEY BB-62 (1982)
NEW FROM DEAGOSTINI 1:8 MCLAREN HONDA MP4/4
Now you can build your own 1:8 model of Ayrton Senna’s famous McLaren MP4/4 Formula 1 car, courtesy of Kyosho and DeAgostini. This highly detailed model is delivered in twenty exciting monthly build phases (check out the website below), and we'll be documenting this spectacular project in TMMI over the coming months, so if you are working on this model too, follow our build! shop.deagostini.co.uk
On the way from Revell is a magnificent 1:350 kit of the USS New Jersey, as she appeared in 1982. The kit will come with metal gun barrels, self-adhesive wooden decking, photo-etched parts and metal anchor chain. www.revell.de/en
Porsche 907C – Vila Real 1971 Guedes 1:43 painted resin kit by Axel’R
WIN REVELL KITS! Win the 1:72 SAAB JAS 39C Gripen! Porsche 911SC Gr4 – 1st Mille Miglia Rally 1981 1:24 resin kit by Arena
TMMI is offering you the chance to win some cool Revell kits of all types, scales and subjects! This time, it’s the 1:72 SAAB JAS 39C Gripen
NEW FROM REVELL
1:24 TRABANT 601S UNIVERSAL '25 JAHRE MAUERFALL' A very special Trabant was created in October 2014; to mark the 25th anniversary of German reunification, artists from the Leipzig Graffiti Association decorated the car with scenes depicting the Fall of the Wall. This unique piece of four-wheeled at was auctioned off and the proceeds donated to the German Children's Cancer Aid charity. The kit includes a decals to replicate the special livery! www.revell.de/en
p 04-05 News 232MN.indd 5
All you need to do is answer this question; Q; From which country does SAAB originate?
Fiat Mefistofele 1923 1:12 plastic kit by Italeri
You can email your answers to the address below or send a postcard to our main office address. Please don’t forget to add your name and postal address so we can send you your prize!
In addition to over 250 ranges of models, Grand Prix Models also publish our own magazine, Four Small Wheels.
[email protected] Revell Saab JAS 39C Gripen Tamiya Model Magazine International ADH Publishing, Doolittle Mill, Doolittle Lane, Totternhoe, Bedfordshire, LU6 1QX, UK In conjunction with Revell Ltd. www.revell.de/en
Please contact us for details and free sample copies
Grand Prix Models
4 Thorpe Close, Thorpe Way Banbury, Oxon, OX16 4SW. Telephone UK 01295 278070 Fax 01295 278072 from outside UK +44 1295 278070 Fax +44 1295 278072
[email protected]
18/12/2014 09:46
GIFT PREVIEW
EUROGRAPHICS PUZZLES
E C E I P ! H T R A E N O piece puzzle! 0 0 ,0 1 a h it w , x Time to rela
6
February 2015 TMMI 232
p 06-07 Jigsaw Pre 232MN.indd 6
18/12/2014 09:48
T
amiya Model Magazine, naturally, is all about model kits of all shapes, sizes and subjects but sometimes we even need to take a break from our hobby when it gets a little too intense! And what better way than a jigsaw puzzle, particularly if the subject is something close to our hearts; tanks! These two jigsaws are new from Eurographics and consist of 1,000 parts each, more than enough to keep you busy for several hours. 'World War II tanks' measures around nineteen by twenty-seven inches in size and features over thirty vehicles from the conflict
(all shown in model-form) and each with a descriptive caption. 'History of Tanks' is the same size and features tanks from the World War I, 2 post-war and modern era. Both are well made and at just £12.99 each, they are great value for money! ● MODEL SPEC EUROGRAPHICS PUZZLES; HISTORY OF TANKS, WORLD WAR II TANKS NUMNBER OF PIECES; . . . . . . . . . . . . 1000 MATERIALS: . . . . . .CARD, COLOUR PRINT FINAL SIZE; 19¼” x 26 5/8” (48.89 x 67.63cm) Availability: www.puzzlesandplay.co.uk www.creativemodels.co.uk TMMI’S OPINION? A fun way to unwind from an intense modelling session and it still features some favourite subjects!
TMMI 232 February 2015
p 06-07 Jigsaw Pre 232MN.indd 7
7
18/12/2014 09:48
FULL-BUILD: MODEL MOTORSPORT REVELL 1:24 RED BULL RB8 ● KIT NO.07075
NE
W E
S
ebastian Vettel dominated the Formula One World Championship from 2010 until 2013 while driving for the Red Bull Racing Team. His team-mate during these seasons was Australian F1 veteran Mark Webber, who competed in the series driving for various teams since 2002 until his switch to the World Endurance Championship for 2014. As a fan of Webber’s, I wanted to build a model to celebrate his career in Formula One. A couple of years ago, Revell Germany took on a challenge which no other model manufacturers had for a long time - they released affordable kits of modern Formula One cars. The first three released were the Ferrari F10, Mercedes W01 and McLaren MP4-25, all from the 2010 season. Despite their success, Revell waited a long time before releasing any more, however the end of 2013 saw a new release from the company; the Red Bull RB8. At a fraction of the price of the current Tamiya releases, one might expect Revell’s offering to be lacking in quality, however this is not the case. Yes, it does have its downfalls, but overall, and with a bit of work, it can build into a good-looking model. I had two kits for this build, and I used one of them as a ‘trial’ for many parts, in order to find the best way of building/painting certain assemblies such as the front and rear wings which proved difficult.
U
8
February 2015 TMMI 232
p 08-14 RedBull 232MN.indd 8
18/12/2014 14:04
W DIG EY TH BR E EE D Jake seaso Kilshaw b n and u descr ilds Revell ibes h 's ow h 1:24 Red e res olved Bull RB8 fro some challe m the 20 1 nges with 2 Formula the d ecals. 1 ..
TMMI 232 February 2015
p 08-14 RedBull 232MN.indd 9
9
18/12/2014 14:05
FULL-BUILD: MODEL MOTORSPORT REVELL 1:24 RED BULL RB8 ● KIT NO.07075
V FRONT WING
To start the build, I searched through the sprues, which were all moulded in blue plastic, for all of the body parts which would need painting in the Red Bull blue. In total, I counted twenty-eight parts, plus an extra two for the halves of the air intake, which would be painted yellow. The instruction manual suggests that each of the front wing pieces should be painted and decalled separately, however after a failed attempt doing this, I started again by gluing four parts (the end-plates and top parts) to the main wing. This made painting easier and minimised the risk of glue destroying the paint and decals. However, this created an issue in that the ‘Red Bull’ decals would need modifying to fit under the part where it attaches. To do this, I cut the decal and when I applied it, I slid it around the part in question.
There is a grand total of twenty-eight body parts, however the rear wing and part of the front wing was assembled.
REAR WING
A similar method was employed for the rear wing assembly. The inside faces of the endplates are entirely covered by a carbon fibre decal, however my first attempt of following the instructions and assembling the parts after painting/ decalling once again proved unsuccessful and so I cut the decal into three parts so that it fit around the wing elements. The rest of the bodywork assembly was fairly straightforward.
The carbon fibre decals are a fantastic addition to the kit, and completely transform the chassis.
PAINT
To paint the blue parts, I used Tamiya TS-89 Pearl Blue, a colour which was released for Tamiya’s own Red Bull kit, the RB6. As with any other TS paint, I decanted it and sprayed the first coats through the airbrush, as not to waste paint and to ensure an even
Both the rear (pictured) and front suspension parts also have CF decals, which were applied over a base of Tamiya TS-14 (gloss) Black.
colour. In order to improve the sheen and to bring out the pearl effect, I applied the final coat directly from the can. The only masking required on the bodywork was the yellow around the headrest. The air-intake parts were separate from the body, but the headrest is attached. To paint this, I
The moulded-on seatbelts would be acceptable as they are, however the author chose to remove them.
sprayed it and the air-intake with Revell Aqua Colour, not a paint I would usually use, but I needed a yellow which would perfectly match the nose decal, and a 9:1 mix of yellow:orange was suggested in the instructions. After this had dried for forty-eight hours, I masked it and painted the blue.
The completed seatbelts, made out of red-painted masking tape and various photo-etch buckles from the spares box.
10 February 2015 TMMI 232
p 08-14 RedBull 232MN.indd 10
18/12/2014 14:04
DECALS
The yellow was painted with Revell Aqua Color, and was masked before spraying the bodywork in TS-89 Pearl Blue.
As the rear wing was assembled before painting, the inside endplate decals need cutting into three pieces to fit.
The two smaller segments were applied next, ensuring there were no gaps.
The decals came on a very large sheet, and with different options, for different races and also to allow the builder to decide how to tackle the yellow area on the nose. It would be possible to paint it yellow and then add logos on top, or to use a single decal combining the yellow patch and the logos. I chose the second option, and although it required a lot of Micro Sol to conform around the part, I found it easier than painting and masking the yellow. The majority of the decals are of a high quality, however the ‘Red Bull’ logos on the side-pods (it is worth noting at this point that I glued the side-pods to the cowling before painting for a similar reason as I mentioned regarding the front wing assembly) proved
challenging, due to the complex shape of the air intakes. At first, I found it impossible to apply these decals, however I tried again with a different set, and cut them in order to ease application. On both decals, I cut the two words away from each other, and also separated each of the letters of the ‘bigger’ words on each side (‘Red’ on left side and ‘Bull’ on right side). This worked much better, and once I had made sure they all matched up, leaving no blue gaps, they look like a single decal. I used a similar method on the black decals which cover the areas around the exhaust exits. These come as a single black decal, which is very difficult to apply around the complex shapes. For these, I cut each decal into five parts, which meant there were simpler
U
TMMI 232 February 2015
p 08-14 RedBull 232MN.indd 11
11
18/12/2014 14:05
FULL-BUILD: MODEL MOTORSPORT REVELL 1:24 RED BULL RB8 ● KIT NO.07075
The completed front wing is very complicated!
V curves for the individual
pieces to conform around. Another pair of decals which caused issue were the main 'bull' decals on the top of the engine cover. At first, I thought that the best way of handling these would be to cut each decal into three pieces, one for each part (air intake, main engine cover, rear engine cover), however I soon discovered that this was not the best method, and instead it was easier to apply the decals as a whole. I did this, and allowed them to dry for a few hours. After this, I carefully brushed some Micro Sol in order to push them into conforming to the part. I have found that with the decals Revell use, it is best to be careful
when applying decal softener because using too much can melt and stretch them. Most of the time, I applied the Micro Sol over two or three sessions, a little at a time.
It would be better if the ‘Pirelli P Zero’ decals were the same type of decal as found in Tamiya kits, as these fall off easily.
gave the decals a smooth, even base to adhere to. The parts assembled easily, and look very impressive when adorned with their decals. At the front of the car, the
parts also have CF decals, however the assembly is more challenging due to the difficulty of attaching the parts directly to the bodywork. Despite this, it
SUSPENSION
I found the rear suspension assembly to be one of the kit’s strongest features. I was surprised to find a comprehensive set of carbon fibre decals for the floor pan, gearbox and suspension arms included. This is something that is rare to find in plastic kits, especially considering the ‘budget’ price of this offering! For each of these parts, I painted them in Tamiya TS-14 (Gloss) Black, again decanted and through the airbrush. This The decals around the exhaust exit needed cutting in order to conform around the curved shape.
12 February 2015 TMMI 232
p 08-14 RedBull 232MN.indd 12
18/12/2014 14:05
is still simple to assemble these and once again, the CF decals give a fantastic finish.
INTERIOR
Unfortunately, the seatbelts which are moulded onto the seat look very poor, and so I sanded these off and made my own, using strips of masking tape painted red, and various photo-etched buckles from both 1:20 F1 cars and 1:24 road cars. I find it interesting that Revell didn’t just include a decal for seatbelts; the instructions make no mention of them, and the finished photos from Revell show that they have just been painted black to match the seat. The steering wheel has a single decal for all of the buttons, which looks surprisingly realistic and saved me the difficulty of painting each of the individual buttons. The assembly of the parts in the interior was very simple, and built up with no problems at all.
WHEELS
Included are four fantastic slick tyres, with no seam line or imperfections on them. A separate sheet of decals has two sets of eight tyre decals, one white (hard) and one yellow (medium). Whilst these decals look very good, they don’t adhere well to the tyres, and it would be better for either a photo-etched stencil or transfers (such as those included in Tamiya kits) to be used. Whilst stencils are available to buy from aftermarket manufacturers, they are designed for 1:20 kits, and not 1:24. The decals eventually lifted, and so I had to replace them with a second set.
CONCLUSION
Overall, this is a very good kit, with some fantastic details such as carbon fibre decals. It is unfortunate that there are no seatbelts included, however with about hour's hour’s work, it is possible to make some realistic ones yourself. Some of the decals (‘Red Bull’ logos on side-pods for example) seem to have not
U TMMI 232 February 2015
p 08-14 RedBull 232MN.indd 13
13
18/12/2014 14:05
FULL-BUILD: MODEL MOTORSPORT REVELL 1:24 RED BULL RB8 ● KIT NO.07075
V been thought out very well
in design, however with some work, it is possible to make these work. I would recommend that the wings should be assembled before painting and decalling (all of the rear wing, and the first two pairs of parts onto the front wing), but this means that some cuts will need to be made in the decals. Yes, this kit has it’s issues, but at around one-third of the price of Tamiya’s RB6 and for a fairly similar result (albeit smaller), it is definitely worth it. ●
Revell’s RB8 captured the look of the car perfectly, and although it’s not in the ‘accepted’ Formula 1 scale of 1:20, it still looks great - and at a great price too.
The complex front wing can be appreciated in this view, as well as the front suspension elements, which are virtually in scale thickness.
MODELSPEC REVELL 1:24 RED BULL RB8 KIT NO.07075
Materials;
Injection-moulded polystyrene, soft vinyl tyres, waterslide decals
Paints used;
Tamiya TS-89 Pearl Blue, TS-14 (Gloss) Black, Revell Aqua Colour (9:1 mix of yellow/orange)
Availability;
Revell kits are widely available from good model shops. www.revell.de/en
14 February 2015 TMMI 232
p 08-14 RedBull 232MN.indd 14
18/12/2014 14:05
JaboG 32, Tactical Air Meet 80, Rammstein air base, June, 1980
s/n 63-13269, 58th CTTW, Luke AFB, U.S.A., 1982 Marinefliegergeschwader 2, September, 1986
JaboG 33, Decimomannu AB, Sardinia, 1964 Marinefliegergeschwader 1, Hannover Airport, 1980
FULL-BUILD: MILITARY VEHICLE HOBBYBOSS 1:35 SOVIET BA-10 ARMOURED CAR ● KIT NO.83840
A BRONEAVTOMOBIL BY HOBBYBOSS!
Martin Šiška builds Hobbyboss's new 1:35 BA-10 'broneavtomobil' (armoured car) and gives it a well-worn, whitewash finish
D
evelopment of Soviet armoured fighting vehicles dates back to the mid 1920s when the first prototype of the BA-27 was created. Successive upgrades in the form of the BA-3 and BA-6 lead to the most modern version, the BA-10. The basis for all these vehicles was the three-axle chassis from the Soviet GAZ-AAA cargo truck, which was built
under license from Ford. The four-man crew was made up of a driver and machine gunner who sat in the vehicle hull, plus the loader and the commander, who was also a gunner, were sitting in the turret. The vehicle was armed with two DT 7.62mm machine guns plus a 45mm calibre '20-K' gun. So the BA-10 had pretty decent firepower, given that it was 'only' an
armoured truck. Armoured protection constituted plating of 15mm, which could only resist a light machine gun. BA-10s were deployed in the Winter War in Finland, the occupation of Poland, in the defence of Moscow and Stalingrad. I even saw a photo on the internet of a BA-10 in service of Iran. Many machines were captured by the Finnish army and even more fell into the
hands of the German army. For modellers who like 'beutepanzer', this is good subject as there are a lot of photos of the BA-10 in Wehrmacht service to be found on the internet and also in the hands of the SS. There were 3,311 units produced in three versions and the base version was upgraded with newer radio plus railroad version.
16 February 2015 TMMI 232
p 16-20 BA10 232MN.indd 16
18/12/2014 09:49
Hull and turret are made with a slide mould.
The tyres have nicely moulded logos in Cyrillic text.
The weakest points are the doors, which have fine depressions and slightly soft rivet detail.
The kit includes a nice, one piece barrel. Detail view of the photo-etched sheets.
Included with the kit is a nicely moulded engine, which just needs some wiring and extra details.
THE HOBBYBOSS KIT
The box contains nine sprues of high quality, sand-coloured plastic which does not break even when working on thin parts. One clear sprue provides light lenses. The tyres are in black vinyl and two sheets of photo-etched parts plus decals for Finland, Germany and two Soviet camouflaged machines will also be found in the box. This vehicle is as much an icon of the Soviet Army as the T-34, only on four wheels. The old kits from Eastern Express and Zvezda have long been available, but now there's a decent kit for decent money. If it did have such a complex and delicate chassis (plus some mild pitfalls in parts-fit), it could be assembled in a few hours. Thus, it takes a little longer time, but I managed to complete it in just three weeks. After a challenging model of T-34 abandoned in Afghanistan, I wanted to build something simple and quick and I was impressed by the BA-10 kit. ●
The decal sheet provides four camouflage schemes.
Assembled chassis is highly detailed, but also delicate.
The tyres are quite soft and do not fit all that well to the wheels, so on the recommendation of his friend Jindřich Šteřbáček, the author filled them with Milliput putty for increased strength and while it was still soft, fitted them to the wheels.
Weld-seams were made with stretched sprue, cemented In this picture we can see the wire added to along the joint line of the hull and lower armour plates as on the headlight. the real machine.
TMMI 232 February 2015
p 16-20 BA10 232MN.indd 17
17
23/12/2014 12:57
FULL-BUILD: MILITARY VEHICLE HOBBYBOSS 1:35 SOVIET BA-10 ARMOURED CAR ● KIT NO.83840
The base mixture was lightened with XF-4 Yellow Green and some areas of the model were lightened in places. The author also painted the periscope covers and lights with different shades of green from Vallejo. In this state the contrast looks awful, but after a whitewash and weathering it will be just right.
The assembled model; the wheels have been sprayed with Mr Surfacer.
The model was sprayed with paints mixed by eye using Tamiya XF-67, XF-5, XF-62, as the Soviets used many shades of green.
The author tried the technique of speckling on oil paints to imitate small chips, which modeller Martin Kováč uses. It also does not matter if it looks too exaggerated here, because 80% of the chips will be concealed under the whitewash and weathering.
To achieve the effect of chipping and also streaked lime whitewash camouflage, an initial layer of almost transparent white must be first sprayed. After spraying two layers of 'Worn Effect' (AK Interactive), XF-2 Flat White was sprayed, with a small drop of green added.
With a brush dipped in warm water, the white colour was loosened in patches to reveal the base green. This forms a very good base for further paint effects.
Photos of detail 'mapping'. This technique involves the layering of white paint to create different textures and appropriate scratches/streaks of lime whitewash. It is clear to see in these pictures.
The whole model after mapping with white oil paint. Using white, the author also painted around some raised details where lime would resist being rubbed off.
The left-front side after 'mapping' from the door forwards. The rear end of the hull-side is yet to be treated. Note the difference between the surface with and without this technique.
18 February 2015 TMMI 232
p 16-20 BA10 232MN.indd 18
18/12/2014 09:49
el
with this
ight.
For the turret numbers the author used Tamiya Masking Tape on which he drew numbers, then cut them out. Precision wasn't essential here, as the numbers would have been loosely painted hand-freehand by the crew or at the depot.
In preparation for the oil paints, the author used colour-washes in combination with Mig Productions' Neutral Wash in the shallower areas and AK's Winter Streaking Grime in the deeper shadows.
Through the mask, the author lightly sprayed the numbers almost transparently, using red from the Vallejo range.
After the colour-washes the author started work on the rendering technique, where oil paints were used to achieve the desired effects, in the exact places where he wanted them. It's not quite like fading, which is technique used on whole surfaces to form of a faded effect.
The author took pictures of this technique so it could be better understood. The first layer was a faded green as a background. He used a mixture of oil paints mixed with olive green shades and buff. This mixture was applied to the desired location and then blended in.
The author finally added more depth to the edge with a dark brown oil colour and blended it in. This colour can also be used to deepen the effect in the middle but in moderation.
Dark rust-coloured oil paint was used here, but a brown colour-wash can also be used, which is also quite useful when creating rust effects. Light rusty shades mixed with yellow or pale orange-red are not very suitable for models with winter camouflage.
Finally, the author softened the edges of the effect which can be seen in the photo. With this technique the modeller can variable amounts of diluted oil paint to create even more layered effects.
Mini Review... PLUS MODEL AERO LINE 1:48 AH-1 COBRA CREW ITEM no.AL4049 www.creativemodels.co.uk
View of the shovel in its basic colours and after detailing with brown and rust toned oil colours.
These two figures, cast in fine grey resin, are the perfect addition to an AH-1 Cobra attack helicopter. Both are sculpted in relaxed positions and wear the ‘bone dome’ crew helmet. Excellent detail and cast flawlessly.
TMMI 232 February 2015
p 16-20 BA10 232MN.indd 19
19
18/12/2014 09:50
FULL-BUILD: MILITARY VEHICLE HOBBYBOSS 1:35 SOVIET BA-10 ARMOURED CAR ● KIT NO.83840
After the oil paints, it was time for pigments. Two mixtures were used; dark and light, both mixed from Mig Productions' Russian Earth, Light Dust and Concrete pigments. These mixtures were first applied over the chassis and then pigment fixer was applied.
Since the surface was looking too ‘dry’, the author used ‘Fresh Mud’ from AK interactive, which was sprayed into corners and under fenders, thus creating a wet patches.
The whole model after rendering. Compare this photo with the image taken after just the colour-wash on page 19; you'll notice the difference!
Using the same mixtures, the wheels were given the mud treatment too. They were fixed with Tamiya X20A thinner so that the pigment could still be wiped off some places.
Hobbyboss have done a wonderful job of capturing the BA-10’s lines in this new-tool production. Excellent detail and generally good fit of parts.
MODELSPEC HOBBYBOSS 1:35 SOVIET BA-10 ARMOURED CAR KIT NO.83840
Materials;
Injection-moulded sandcoloured polystyrene, photoetched brass, soft vinyl tyres, waterslide decals
Paints and materials;
Tamiya Acrylics XF-2 Flat White, XF-4 Yellow Green, XF-5 Flat Green, XF-62 Olive Drab, XF-67 NATO Green Mr Hobby Mr Surfacer, AK Interactive Worn Effect, Winter Streaking Grime, Fresh Mud, Mig Productions' Neutral Wash
Availability; The ‘hairspray technique’ worked extremely well on the horizontal surfaces as can be seen here.
Note the darker, slightly rusted edges around the turret hatch, where they’d been handled by the crew.
Hobbyboss kits are available from Creative Models; www.creativemodels.co.uk
20 February 2015 TMMI 232
p 16-20 BA10 232MN.indd 20
18/12/2014 09:50
C
M
Y
CM
MY
CY
CMY
K
PAINTING TECHNIQUES: SCIENCE-FICTION FIGURE DARK WORLD CREATIONS 70MM 2000AD ROGUE TROOPER
CONTAINS GRAPHIC DETAIL Rogue Trooper – a genetically engineered super soldier or GI (Genetic Infantrymen) was created by Gerry Finley-Day and artist Dave Gibbons for the 2000AD comic series back in 1981. Now it’s 2014 and Alex Long shows how he tackles the computer engineered 70mm scale miniature created by Dark World Creations.
F
or those of you who have never read 2000AD, or at least the editions featuring Rogue Trooper, here’s a quick introduction to his character. Rogue's story takes place on a planet called 'Nu Earth' which has an environment poisoned by biological and chemical weapons used during the perpetual years of civil war between the Southers and the Norts. Much of the story is inspired by WWII, the American Civil War and the Cold War and includes distinct references to these conflicts. Created by the Southers to withstand the harsh atmosphere, the virtually invulnerable 'Genetic Infantrymen' are nonetheless betrayed by the Traitor General and slaughtered at the Quartz Zone Massacre. Only Rogue survives, managing to salvage the Bio-chips – implants designed to save the personalities of dead GI’s – of three comrades; Helm, Bagman and Gunnar. He implants these Bio-chips into his helmet, backpack and rifle. With his superior strength, skill and super tough blue skin Rogue embarks on a mission to hunt down the Traitor General and the Nort commanders.
22 February 2015 TMMI 232
p 22-26 RogueTrooper 232MN.indd 22
18/12/2014 09:51
1
2
Finely cast parts in high quality resin.
ASSEMBLY
The first thing I have to say about this kit is the sculpt and casting is absolutely outstanding. This is the first time I’ve painted a digitally sculpted figure and I have to say I’m impressed. Aside from the excellent detailing, the fit of parts is amazing. The arms clip in seamlessly and line up 100% accurately with Gunnar the rifle. Helm, Rogues helmet, actually has an audible click when placed on his head, so perfect is the fit. He’s as well engineered as a miniature as he is in the comics! Photo 1 shows the kit in parts, straight from the box. As well as the resin parts, some photo etch and copper wires are included, making up the chin straps and cords attaching the pouches on each thigh. Some small pilot holes were drilled in the pouches to facilitate a deeper attachment of the wire, see photo 2. For ease of painting and generously aided by the fact that the arms fit so well that they can easily be attached after painting, Photo 3 shows the main body assembled to a point ready to receive some paint, with the parts separated and pinned to wooden blocks. To illustrate the ease of fitting the additional parts Photo 4 shows the arms, Gunnar and Bagman loose fitted. With minimal clean-up of parts required the assembly was pretty straightforward and only took around 30 minutes.
Pilot holes drilled using a 0.5mm drill. 3
4
5
All ready for spray from the airbrush.
7
The Flat Black primer coat. 6
I always involve the airbrush with my figure painting.
Test fitting of the arms and weapon shows how neatly this figure fits together. 8
The top down spray of base colour really helps define the shade and highlight areas.
9 Invaluable for acrylic paints – the wet palette.
10
PAINTING
I always prefer to work up from a black so an airbrushed base coat of Scale 75’s Scale Color Flat Black SC-00 has been applied to the whole figure and parts, see Photo 5. The flesh is first on my agenda and it’s one of the most striking aspects of Rogue Trooper. Via the airbrush Rogue has received a top down spray of Scale Color Sky Blue SC-50. This helps speed up the coverage of the black and also gives a natural reference for the shade and highlight areas. See Photos 6 – 8. With the brush work next, the wet palette (Photo 9) is loaded up with all the colours I’ll need for the blue flesh. Six shades of blue are mixed (Photo 10) stemming
U
Mixes stay usable for days and even weeks which is essential for consistency of colour.
The areas of natural shade are easy to see.
11
12
13
Picking out the initial highlights with the brush.
Rouges eyes have painted with Vallejo Fluorescent Yellow.
Using a pale flesh instead of white to highlight the blue skin helps take the harshness out of the highlights.
TMMI 232 February 2015
p 22-26 RogueTrooper 232MN.indd 23
23
18/12/2014 09:51
PAINTING TECHNIQUES: SCIENCE-FICTION FIGURE DARK WORLD CREATIONS 70MM 2000AD ROGUE TROOPER 14
15
16
Colour choices for the equipment.
Using the airbrush for base coats save at least an hours brushwork.
Thin washes of paint blend easily into the finely pigmented spray coat.
V from the mid-tone of Sky
Blue, the three colours to the right have Caribbean Blue SC-49 and Pale Skin SC-17 added in increasing amounts, the three to the left have Mediterranean Blue SC-51, Deep Blue SC-55 and Flat Black SC-00 added in a similar fashion. This actually leaves seven shades including the mid-tone Sky Blue for me to work with. Beginning with the highlights, progressive layers of very thin paint are applied using the lightest of the mixes. The transitions 17
19
Work has begun on the shoulder straps.
Side view of the pouch in progress.
towards the mid-tone are quickly applied working from right to left on the wet palette toward the Sky Blue. Due to the very matt nature of the paint which is aided by the fact that the first couple of layers are airbrushed, the thinly brushed layers soak nicely into the surface, allowing controlled transitions. Exactly the same goes for the shades, only working from left to right on the palette. The wet palette enables me to work very quickly, Photo 11 shows the initial highlights which, aided 18
20
The pouches and belt receive some attention.
by the top down airbrush coat, have already significantly defined the torso’s musculature. Further highlights are added, as seen in Photo 12, along with Rogue's glowing eyes. Photo 13 shows the progression of the arms, it’s always wise to be mindful of the final position of parts when painting them separately so as to maintain the correct lighting. Happy with the stage the flesh has reached I have now moved onto the equipment using the following colours, listed from dark to light; 21
Vallejo USA Olive Drab 70889, Arabic Shadow SC-22, Iroko SC-27, Basic Flesh SC-20 and Thar Brown SC-61 (Photo 14). Again using the airbrush I have primed the separate parts (Photo 15) with Arabic Shadow SC:22. After masking off the torso with cling-film I have also primed the trousers and pouches with the same colour. Although the trousers won’t end up this colour it’s still a good ground to apply their final green shade. Photo 16 shows the initial brushed highlighting and shading Transitions are becoming smoother with sharper highlights.
Rear view still requiring more refining.
24 February 2015 TMMI 232
p 22-26 RogueTrooper 232MN.indd 24
18/12/2014 09:51
25
22
23
24
Some metallics are added to the rifle with darker washes to come later.
Bagman and the canteen are nearing completion.
My colour selection for the trousers.
given to the equipment. In photos 17 to 23 we can the progress of all the equipment and straps, again built up with multiple thin layers paint from the wet palette. For Rogue’s trousers I used a trio of greens Autumn Green SC-48, Sherwood green SC-44 and Field Grey SC-46, to produce six shades (Photos 24 – 25) of green. I began by painting all the highlights in the bright Autumn Green, see Photos 26 and 27, which looks pretty harsh initially but is quickly toned down with the application of the Sherwood Green mid-tone (photo 28). Some shadows are added using the Field Grey (Photo 29) but with
the contrast between dark and light still quite raw successive filters of the mixed mid-tones are used to gradually ease the transitions. With both legs now finished the boots and Helm have been painted using the same set of colours already present on the wet palette, only mixed in differing combinations. For example the green for Helm was achieved by mixing some of the Caribbean Blue from the flesh mix into the Sherwood Green from the trousers. The Metallic colours are again Scale 75 paints – Black Metal SC-63, Cobalt Alchemy SC-68 and Emerald Alchemy SC-69 – along with
some washes of Citadel Badab Black and Asurman Blue. The Arms, Gunnar and Bagman have all been glued in place (Photo 30) and all of a sudden he’s nearly done! Photos 31-33 show the figure complete after a final half hours work on the base.
THE PLINTH
Presentation for your model should always be an important factor and never just an afterthought. It’s something to be considered before any paint has touched the model, as the excitement of painting 30 a new kit can often take over from the practical and artistic consideration required
26
27
28
29
Picking out the highlights in the brightest highlight.
It looks rough at this stage but the point is to create a light reference.
Some mid-tones added between the highlights.
Using thin washes of mid-tone over the entire area help bring the extremes of dark and light together.
Mini Review... XTRADECAL BRISTOL BLENHEIM & BOLINGBROKE IV & IVF ITEM no.Z72215 www.hannants.co.uk
The wet palette not only keeps the paints workable but also at the right consistency.
when selecting a base and nameplate. Luckily for me I already had an appropriate plinth in my stash, a round resin base made by MDP (Model Display Products). Again quite luckily the packaging contained two perfectly sized Rogue Trooper graphics taken from the comic book, on each side of the box. Ideal for making a stencil! After some careful work with the scalpel (Photo 34) I managed to make two stencils. The other bonus with the packaging is that the outer layer of card is a
U
Happy to get the arms on and see Rogue fully assembled.
With Airfix launching a new-tool Blenheim Mk.IV to follow their new Mk.I, this new decal set from Hannants’ ‘Xtradecal’ line are timed perfectly. Markings for RAF, RCAF, Free French, Portuguese and Royal Hellenic air forces – plus captured examples – will all be found on the sheet, so the modeller is offered a wide range of markings to choose from. All are printed to Xtradecals’ high standard and colour instructions are provided.
TMMI 232 February 2015
p 22-26 RogueTrooper 232MN.indd 25
25
18/12/2014 09:52
PAINTING TECHNIQUES: SCIENCE-FICTION FIGURE DARK WORLD CREATIONS 70MM 2000AD ROGUE TROOPER
V lovely gloss finish and very
strong, so I was able to soak the card in water a peel off a gossamer thin layer of the gloss top layer for my stencils. After spraying the base black the first stencil is applied (Photo 35) by wetting the back and allowing it to stick to the base. Then the base was sprayed grey and the stencil removed (Photo 36). Following that the second stencil is applied over the black outline area, masked off and sprayed red, the result is seen in Photo 37. After some tidying up with a brush and a couple of coats of Tamiya semi clear gloss it’s done. One home-made nameplate made by recycling the box!
31
32
CONCLUSION
33
This miniature was an absolute joy to paint for a number of reasons. Firstly being a fan of 2000AD and having such a perfectly rendered version of Rogue Trooper to work on was so great. The model is totally accurate in all aspects, finely cast, well detailed and was clearly born from true respect for the original art of the 2000AD comics. From a figure painting perspective if you ever have the opportunity to paint blue flesh then take it! The figure offered different challenges to my usual historical miniatures and taking on different subjects can only help broaden skills in my opinion. ●
MODELSPEC
34
35
36
DARK WORLD CREATIONS 70MM 2000AD ROGUE TROOPER
Materials
Resin, photo-etched brass.
Paints used;
Scale Color Acrylics; SC-00 Flat Black, SC-17 Pale Skin, SC-20 Basic Flesh, SC-22 Arabic Shadow, SC-27 Iroko, SC-44 Sherwood Green, SC-46 Field Grey, SC-48 Autumn Green, SC-49 Caribbean Blue, SC-50 Sky Blue, SC-51 Mediterranean Blue, SC-55 Deep Blue, SC-61 Thar Brown, SC-63 Black Metal, SC-68 Cobalt Alchemy, SC-69 Emerald Alchemy. Vallejo Acrylics; 70889 USA Olive Drab, 70950 White, 70951 Black, 70995 German Grey. Tamiya Acrylics; X-35 Semi Clear Gloss.
References used;
Rogue Trooper – Future War, published by Titan Books Ltd, ISBN-10 1840234817
Availability
34. I was able to get these stencils so thin they could have been used as decals!
37
35. Just wetting the back was enough to attach the first stencil to the base securely 36. Lining up the second stencil over the black outline was tricky work 37. I opted for red lettering for a more dramatic effect
www.darkworldcreations.com
26 February 2015 TMMI 232
p 22-26 RogueTrooper 232MN.indd 26
18/12/2014 09:52
FIATMefistofele No 4701 1:12 model kit modèle réduit
21706 c.c.
www.italeri.com
scale echelle
Model unique in terms of technology and accuracy, consists of over 500 pieces to be assembled partially with screws. Opening bonnet Highly detailed engine Working steering
Driven by E. A. D. Eldridge from 1923 to 1925.
Decals sheet, clear sheet and box with screws, rope and other parts
3899 IVECO Stralis Hi-Way
1:24
3892 Volvo VN 780
1:24
Super Decal Sheet for 2 versions • Chromed adhesive • Chromed whel rims
2744 Wessex HAS.1
1:48
5619
Vosper MTB 74 St. Nazaire raid
Photo-etched fret, clear sheet, screws and ropes included
1:35
Royal Navy MTB 74
St. Nazaire raid 28 March1942
KIT PREVIEW
EDUARD AIRCRAFT KITS
A selection of new and recent aircraft models from Eduard
SOMETHING IN THE AIR
E
duard, the Czech-Republic based company, are perhaps best known for their vast range of photo-etched detail sets that they have built up over many years for every conceivable model subject. But they also offer a line of full kits, some tooled by themselves and others using plastic parts licensed from other manufacturers.
Released recently is the limited edition kit entitled 'Danger Zone' (referring to the film 'Top Gun') which uses Hobbyboss parts for the F-14 Tomcat, along with Eduard's own photo-etched brass (some of which is pre-coloured), 'Brassin' resin components (pilots' seats, wheels/tyres, jet nozzles and more) plus pre-cut canopy masks and an extensive new
decal sheet with six high-vis options. Also brand new and moulded by Eduard themselves is a gorgeous new 1:48 'ProfiPACK' kit of the WW1 Siemens-Schuckert D.III fighter, offering state of the art plastic parts plus photo-etched brass and colourful decal options. Eduard have also re-issued two of their complex but excellent 1:48 Fw190s, 1:48 Lavochkins
28 February 2015 TMMI 232
p 28-29 Eduard Pre 232MN.indd 28
18/12/2014 09:53
1:48 SiemensSchuckert Werke D.III (8256)
1:48 Messerschmitt Bf110E Heavy Fighter (8203)
1:48 Fw190A Nachtjäger (8177)
1:48 Fw190A-8 (84120)
1:48 Danger Zone Grumman F-14 Tomcat (1192)
1:48 La-5N, La-7 (1189)
AIR TONIGHT... La-5 and La-7 in a one-box set (which includes a fabulous reference book, albeit in Czech language), Bf110E Heavy Fighter and more, listed here. So, if you haven't tried an Eduard aircraft full-kit, why not try one, they are very impressive and will test your modelling skills! ●
MODEL SPEC Availability: Eduard products are available from; www.eduard.com and www.creativemodels.co.uk TMMI’S OPINION? A excellent and varied range of kits offering something for everyone, from WW2 to the (almost) modern day.
1:72 La-7 (7425)
1:72 MiG-15 (7423)
TMMI 232 February 2015
p 28-29 Eduard Pre 232MN.indd 29
29
18/12/2014 09:53
FULL-BUILD: MILITARY AVIATION TAMIYA 1:32 F4U-1A CORSAIR ● KIT NO.60325
C I F I C A P 2 . t P , E T PIRA Spencer Pollard completes Tamiya’s new F4U-1A Corsair in RNZAF colours, the second version of the sublime new 1:32 kit
L
ast month we took a detailed look at this very impressive new kit from Tamiya, offering some hints and tips on its construction, ready for final painting and assembly. If you’ve stayed with us this far, you’ll know that this is a kit to enjoy, all of the pieces being well detailed and precisely engineered, fit and finish being almost perfect. This time around we’ll showcase the completed model and
offer a few photographs of the model during painting and weathering. Though we’ve not created a true ‘step-by-step’ feature, you will hopefully find enough to spur you on, should you want to either build this kit, or something similar for your own collection. In terms of tools and techniques, this model has been painted with Gunze Sangyo paints and weathered simply with Tamiya Acrylics and oil
paint washes. Though the finish looks complex, it really isn’t, fine layers of colour being built up over a basic camouflage scheme that needs little more than some forward planning and the careful application of paint. Thankfully, the model is designed is such a way as to facilitate the breaking down of the airframe into smaller subassemblies that can be worked on individually and then brought together
U
30 February 2015 TMMI 232
p 30-38 F4U1A Pt2 232MN.indd 30
18/12/2014 09:55
2
TMMI 232 February 2015
p 30-38 F4U1A Pt2 232MN.indd 31
31
18/12/2014 09:55
FULL-BUILD: MILITARY AVIATION TAMIYA 1:32 F4U-1A CORSAIR ● KIT NO.60325
V in one sitting. In this case
we had the fuselage and inner wings; the outer wing panels; the individual flaps; the undercarriage legs, wheels and doors; the engine and cowling panels and finally, the canopy. The fit is such that these sections can be painted and weathered and then brought together with no fear of gaps or other fit issues, everything dropping into place to be held there with little more than a brush full of liquid glue, or a drop of cyanoacrylate. Though the kit offers two attractive aircraft on its decal sheet, the fact that we had built a number of American aircraft for both our Corsair book and this magazine, forced us to look for something a little different. Initially we looked at a Fleet Air Arm version, but once again Brett Green had that covered so we chose to build a Royal New Zealand Air Force (RNZAF) F4U-1A – but which one? Leafing through our references and online, there were plenty of choices, some in three-tone camouflage and some in overall Gloss Sea Blue.
With the main sub-assemblies complete, the open areas were masked off with Tamiya masking tape. The open nose and the cockpit were both carefully masked, their edges having already been sprayed with the exterior colours to facilitate this process.
A close-up of the nose reveals my system for masking off open areas such as this, a long piece of tape being used for the outer rim, followed by carefully applied smaller pieces, within.
Masking the lower wing and its open wheel bays is a breeze thanks to the inclusion of one-piece, closed bay doors. Though the bays may well have been painted Gloss Sea Blue in reality, the use of Interior Green adds a further degree of interest and helps to break up the overall blue colours scheme.
U
The model was fully painted using Gunze Sangyo acrylics. The rear end was first sprayed with H332 Light Aircraft Grey (white being too stark on a weathered model such as this) followed by C366 Intermediate Blue and then Tamiya XF-18 Medium Blue. The rear end was then masked and the nose and wings sprayed with a lightened Gloss Sea Blue mixed from C365 Gloss Sea Blue cut through with a few drops of H65 RLM65 Light Blue. All of the colours were thinned 50/50 with Mr Color Leveling Thinner before being glazed on in very thin layers. Once happy with the application of the paint, the model was left overnight to dry.
Though the upper wing looks as if it was ‘pre-shaded’ it has actually been post-shaded and post-highlighted with multiple layers of lightened and darkened shades of the basic Gloss Sea Blue mix: lightened with increasing layers of RLM 65 and then darkened with drops of Semi Gloss Black and full strength GSB. The trick here was to work slowly, create very subtle shifts in tone and not work on too great an area at any one time.
32 February 2015 TMMI 232
p 30-38 F4U1A Pt2 232MN.indd 32
23/12/2014 12:59
www.creativemodels.co.uk
Mod
el b
yW ayn
eH
ui
lb
de
Mo
re
oo
yM
rem
e yJ
Get Creative!
HOBBYBOSS, VALLEJO, MODEL MASTER, MINIART, MASTER BOX, AK INTERACTIVE, MIG PRODUCTIONS, PLUS MODEL AND MANY MORE...
Unit 6-10, Honeysome Ind Est., Honeysome Road, Chatteris, Cambs. PE16 6TG
www.creativemodels.co.uk Tel: +44(0)1354 760022
p 33 CreativeModels 232.indd 1
15/12/2014 10:49
FULL-BUILD: MILITARY AVIATION TAMIYA 1:32 F4U-1A CORSAIR ● KIT NO.60325
V Being careful with variants
was important; though many of these looked like -1A variants, many were -1Ds so cross-referencing became paramount and then the perfect aircraft was found… Flicking through my books, one aircraft stood out, a spliced together F4U-1A that was reconstructed from the rear end of NZ5272 and the forward section of a recently repainted NZ5307. This aircraft was then renumbered NZ5307, before being placed back in service with 1SU/18 Squadron flying from Guadalcanal during October of 1944. The difference in colours between these two sections was appealing and would help create a visually different looking model. All I needed to do was find some decals for the national markings, these coming from a Ventura sheet (V3269) that supplied the necessary markings for an overall GSB F4U-1 from No.30 Servicing Unit. The remaining markings came from generic sheets of letters and numbers. If you wish to complete your model in these colours, Xtradecal have produced a sheet of markings that include this scheme. Numbered X32057, it should be available from Hannants by the time this issue goes to press. Over the next few pages we’ll take you through the completion of this model, offering a few hints and tips along the way. This then is our F4U-1A Corsair – we hope you like it! ●
The national insignia on the real aircraft were created by overpainting the U.S Navy markings and applying new insignia where missing. Here. You can see not only those variations in terms of design, but also location, the newer, lighter items painted by the RNZAF personnel, being further out on the wing than their US counterparts.
34 February 2015 TMMI 232
p 30-38 F4U1A Pt2 232MN.indd 34
The tail was painted in the same way, care being taken to ensure that the colours looked to have faded equally. Though the upper blue colour was distinct when first applied to these aircraft, over time and subjected to the ravages of use in the Pacific, it faded to a level where it was almost indistinguishable from the Intermediate Blue used on the fuselage sides. That being so, the colours were shaded and highlighted and then both the GSB and Intermediate blue oversprayed with fine layers of light blue to further blend them together. Happy that the model looked good, everything was sprayed with three thin layers of Tamiya X-22 Clear ready for the decals. The Ventura decals worked like a charm, settling down perfectly over the delicate surface detail with the aid of Daco’s Strong setting solution and Gunze Sangyo’s Mr Mark Softer. With the decals dry, Tamiya X-22 Clear was mixed with three drops of Gunze Sangyo Flat Base to create the most wonderful, satin varnish. Thinned with around 60% Leveling Thinner, the varnish was glazed over the model until the paintwork was perfectly smooth and even. Note how the use of the varnish has helped bring out all of those different tones applied earlier.
The markings around the tail are a mixture of Ventura decals and Xtradecal numbers: the black numbers coming from sheet X32021 ‘RAF Serial Letters, Numbers and Royal Navy 8”and 4” Black’ and the white numbers on the rudder from sheet X32022 ‘RAF Serial Letters, Numbers and Royal Navy 8” and 4” White’. The rudder numbers should actually be orange-yellow, conflicting information guiding me to use white. If I have some time, I may change them to the correct colour…
18/12/2014 09:56
ectly etting s dry, o Flat ound il the of the arlier.
With the masking removed, the cockpit opening comes into view. This image gives you a good idea of why accurate masking is so important to the look of a detailed model such as this.
Weathering is in full swing! The panel lines have been carefully defined with thin washes of Raw Umber oil paint, darkened with Humbrol Matt Black and then thinned with white spirit. Once in place, a very thin mix of Tamiya Flat Black and Red brown, thinned with 90% Mr Color Thinner was used to further define the panels and add extra layers of dirt and degradation on the surface of the model.
The application of the black/red brown mix has been particularly successful around the tail, the very thin nature of this paint allowing fine build-ups of colour without fear of overdoing the effect. Note the delicate paint chips added using Vallejo acrylics.
Compare this shot of the upper wings with those seen earlier. The application of further layers of dirt and grime along with delicate paint chips has really brought these sections to life. Note the repair patch on the starboard wing. This was made from a rectangle of aluminium plumber’s tape, oversprayed with Tamiya Neutral Grey.
TMMI 232 February 2015
p 30-38 F4U1A Pt2 232MN.indd 35
35
18/12/2014 09:57
FULL-BUILD: MILITARY AVIATION TAMIYA 1:32 F4U-1A CORSAIR ● KIT NO.60325
The beautifully detailed engine is now at home within its cowling. The cowling panels have been painted, shaded and highlighted, but as yet, not fully weathered – this will be done once the engine is fixed to the rest of the airframe.
Knowing that the front end of this aircraft had recently been painted in GSB, the application of paint ships was kept intentionally low. Note the metallic chips around the cockpit sill and the revealed primer around the wing root and edges of the engine access panels.
Mini Review... ZVEZDA 1:100 GERMAN LIGHT ARMOURED CAR SD.KFZ.222 ITEM no.6157 www.hobbyco.net
One of the latest additions to Zvezda’s line of miniature armour is the familiar Sd.Kfz.222. As with other releases in the line-up, the detail is remarkably good, with the grilles atop the hull delicately rendered. The chassis is provided as an individual part, offering better detail than if moulded in with the hull.
36 February 2015 TMMI 232
p 30-38 F4U1A Pt2 232MN.indd 36
18/12/2014 09:57
The painted and weathering undercarriage units, each finished to match the surrounding camouflage from each different aircraft.
The canopy sections painted and unmasked. A quick polish and these will be ready to fix in place.
TMMI 232 February 2015
p 30-38 F4U1A Pt2 232MN.indd 37
37
18/12/2014 09:56
FULL-BUILD: MILITARY AVIATION TAMIYA 1:32 F4U-1A CORSAIR ● KIT NO.60325
How To Build Tamiya's 1:32 F4U-1 Corsair In this eighty-four page book, Tamiya's Birdcage version of the F4U-1 kit is explored in great depth, with detailed, step-by-step construction, superdetailing, painting and weathering guides, plus original wartime reference photos of the Birdcage Corsair in action. Although it's for the Birdcage version, there is a huge amount of information that is also relevant to the F4U-1A too. Order now from www.adhbooks.com
The RNZAF markings transform the look of the Corsair, making it an attractive alternative for modellers. As standard, the kit includes US schemes only.
One wing folded and one extended was possible on the Corsair, so this is not an unrealistic scenario.
38 February 2015 TMMI 232
p 30-38 F4U1A Pt2 232MN.indd 38
18/12/2014 09:57
p 39 AirbrushCo 232.indd 8
15/12/2014 10:50
New Releases
Please turn to page 60 for the
The latest photo-etched sets, resin parts, figures and accessories to enhance your scale models...
What’s in the box?
AD; ACETATE DIALS, CC; CAST CERAMIC (PLASTER), CMA; CAST METAL ALLOY, CP; CHROMED PARTS, DT; DRY TRANSFER (DECALS), EPS; EXTRUDED PLASTIC SECTION, F; FABRIC, IM; INJECTION MOULDED (PLAST MC; METAL CHAIN, MMA; MACHINED METAL ALLOY, MW; METAL WIRE, MT; METAL TUBING, NM; NYLON MESH, PE; PHOTO ETCH, PCM; PRE-CUT MASKS, R; RESIN, SVT; SOFT VINYL TYRES (OR TUBING), VF; VINYL
TAMIYA, JAPAN
www.tamiya.com www.hobbyco.net FIGURE SET This new set from Tamiya comprises four Imperial Japanese Army officers (two standing, two seated) at a briefing session. The standing figure is a tank commander and wears a protective helmet and goggles. Included with the set is a table, two chairs and ammunition crates, along with a field telephone set, cable reel plus other items of army kit. Superbly sculpted; the hands are particularly well formed. 1:35 JAPANESE ARMY OFFICER SET (35341)
TAMIYA, JAPAN
www.tamiya.com www.hobbyco.net DETAIL SET Tamiya chose to release this barrel and breech set for the new Jagdpanzer IV simultaneously with the kit. It consists of a single sprue for the gun breech parts, some small polycaps and a machined aluminium gun tube. It adds a nice touch of detail to the model and it well priced at around £10 and less, in some places. 1:35 GERMAN JAGDPANZER IV /70(V) LANG METAL GUN BARREL SET (12660)
40 February 2015 TMMI 232
p 40-42 NR Access 232MN.indd 40
18/12/2014 09:59
Accessories
ION MOULDED (PLASTIC), ITL; INDIVIDUAL TRACK LINKS, LCC; LASER CUT CARD, LLT; LINK AND LENGTH TRACKS, R TUBING), VF; VINYL FIGURES, VF; VACUUM FORMED (PLASTIC), WC; WOVEN CORD, WS; WATERSLIDE (DECALS)
EDUARD, CZECH REPUBLIC
www.eduard.com www.creativemodels.co.uk www.hannants.co.uk MODEL ACCESSORY SETS Airfix’s new-tool C-47 Skytrain comes in for some PE attention this month, with exterior parts, surface panels, seatbelts, landing flaps, cargo belts and a pre-cut masking set. This already good kit can be taken even further now! 1:72; • C-47 landing flaps (72588) for Airfix • C-47 exterior (72587) for Airfix • C-47 surface panels (72590) for Airfix • C-47 cargo seatbelts (73514) for Airfix • C-47 interior self-adhesive (73513) for Airfix • Blenheim Mk.I interior self-adhesive (73512) for Airfix • Blenheim Mk.I landing flaps (72591) for Airfix • Blenheim Mk.I bomb bay (72592) for Airfix • Blenheim Mk.I exterior (72589) for Airfix • F4U-1A interior self-adhesive (73515) for Revell 1:48; • Typhoon Mk.Ib Bubbletop (49684) for Italeri/Hasegawa • Typhoon Mk.Ib Bubbletop landing flaps (48824) for Italeri/Hasegawa • EMB-314 Super Tucano exterior (48820) for Hobbyboss • Spitfire Mk.V landing flaps (48822) for Airfix • La-5FN upgrade set (48823) for Eduard • SSW D.III seatbelts fabric (49070) for Eduard • Spitfire Mk.Vb interior self-adhesive (49695) for Airfix • Do215 landing flaps (48819) for ICM 1:35; • Merkava IID (36279) for Academy • Merkava IID armour shields (36280) for Academy • Achzarit basket (36285) for Meng • Achzarit TOGA armour (36286) for Meng 1:32; • F-104C exterior (32363) for Italeri • F-104C interior self-adhesive (32819) for Italeri • F-104C electronic equipment (32820) for Italeri • F-104C gun bay (32822) for Italeri • F-104C1 seatbelts (32824) for Italeri • F-104A interior self-adhesive (32823) for Italeri ZOOM SETS; • F4U-1A self-adhesive (SS515) for Revell • La-7 Weekend (SS520) for Eduard 1:72 MASK SETS; • MiG-15 Weekend (CX375) for Eduard • Blenheim Mk.I (CX398) for Airfix • F-35 (CX399) for Hasegawa • C-47 (CX401) for Airfix • F4U-1A (CX402) for Revell • Stirling Mk.IV (CX403) for Italeri • La-7 Weekend (CX405) for Eduard 1:48 MASK SETS; • C-130J (EX438) for Italeri • Bf109E-1/E-3 (EX439) for Eduard
TAMIYA, JAPAN
www.tamiya.com www.hobbyco.net DETAIL SET, MATERIALS Tamiya's 1:24 Toyota 86/GT86 gets a set of carbon-fibre effect decals for the bonnet, roof and boot-lid, plus the wing mirrors, side inserts, dashboard and door card inserts. Pre-formed decals and a detailed application guide are plus-points. Also new are two packs of 'Heat Shrinking Pla-plate' in B6 size, clear and white. 1:24 TOYOTA 86/GT86 CARBON PATTERN DECAL SET (12659) HEAT SHRINKING PLA-PLATE B6 CLEAR (70214) HEAT SHRINKING PLA-PLATE B6 WHITE (70215)
AK INTERACTIVE, SPAIN
www.creativemodels.co.uk New items from AK have keyed into the WW1 theme, with paint sets for tanks and uniforms presented in attractive packs. The paints come in 17ml bottles which need a good shaking to ensure the pigment is stirred up. Very useful! WWI FRENCH COLORS, AFV SERIES (AK4050) WWI BRITISH COLORS, AFV SERIES (AK4040) WWI BRITISH UNIFORMS, FIGURE SERIES (AK3080) WWI GERMAN UNIFORMS, FIGURE SERIES (AK3090) WWI FRENCH UNIFORMS, FIGURE SERIES (AK3100) PAINT STRIPPER (AK186) TMMI 232 February 2015
p 40-42 NR Access 232MN.indd 41
41
18/12/2014 10:00
New Releases
Please turn to page 60 for the
The latest photo-etched sets, resin parts, figures and accessories to enhance your scale models...
What’s in the box?
AD; ACETATE DIALS, CC; CAST CERAMIC (PLASTER), CMA; CAST METAL ALLOY, CP; CHROMED PARTS, DT; DRY TRANSFER (DECALS), EPS; EXTRUDED PLASTIC SECTION, F; FABRIC, IM; INJECTION MOULDED (PLASTIC), ITL; INDIVIDUAL TRACK LINKS, LCC; LASER CUT CARD, LLT; LINK AND LENGTH TRACKS, MC; METAL CHAIN, MMA; MACHINED METAL ALLOY, MW; METAL WIRE, MT; METAL TUBING, NM; NYLON MESH, PE; PHOTO ETCH, PCM; PRE-CUT MASKS, R; RESIN, SVT; SOFT VINYL TYRES (OR TUBING), VF; VINYL FIGURES, VF; VACUUM FORMED (PLASTIC), WC; WOVEN CORD, WS; WATERSLIDE (DECALS)
INSIDE THE ARMOUR
www.insidethearmour.com ARMOUR CONVERSION This set provides all you need to convert Tamiya's 1:35 T-55A kit into the T-54 variant. The box includes a new turret, replacement engine deck, a full set of roadwheels and fender stowage boxes cast in resin. An aluminium main gun barrel is also provided, plus a heap of other items (including photo-etch) with excellent instructions. T54 EGYPTIAN (CONVERSION) (ITA35189)
LEOPARD WORKSHOP
leopardclub.ca ARMOUR ACCESSORIES These new resin road wheel sets are designed to be used with Meng, Takom and Italeri/Revell kits. Improved detail is on show and only a little clean-up is needed on each wheel. • 1:35 LEOPARD 1 REPLACEMENT ROAD WHEELS AND IDLERS, WHEELS TYPE 1 (LW001-1) • 1:35 LEOPARD 1 REPLACEMENT ROAD WHEELS AND IDLERS, CURVED INNER RIM TYPE 2 (LW002) • 1:35 LEOPARD 1 SPARE WHEELS (LW006)
MASTERPIECE MODELS, USA
masterpiecemodels.com DIORAMA ACCESSORIES New from Masterpiece Models is a section of Soviet era runway base, with the distinctive hexagonal patter to each concrete slab. The base is cast in lightweight resin and measure twelve inches square. Available in 1:48 and 1:32. Also new is 'The Sandbox', a sander that can fix to a vacuum cleaner to draw away dust; extremely useful when sanding resin. 1:48 SOVIET RUNWAY BASE (MMSV-003) 1:32 SOVIET RUNWAY BASE (MMSV-004) THE SANDBOX
SUPAFIX, UK
www.supa-fix.com GLUE SET This pack of gap-filling adhesive comprises two 10ml bottles of low viscosity cyanoacrylate glue plus two 10ml bottles of reinforcing powder. This latter material is sprinkled 'dry' into a gap and the CA glue then careful poured on, setting hard in a few seconds. It can be filed and sanded once cured. Very interesting! SUPAFIX APX4 ULTRA STRENGTH ADHESIVE AND REINFORCING FILLING POWDERS
ZERO PAINTS
www.hiroboy.com PAINT SET This new double set of paints was formulated specifically to match the colours (and yellow decal) of Tamiya's 1:12 Lotus 49, previewed last issue, and we are proud to say that TMMI had a hand in their creation! The British Racing Green comes in a 60ml bottle and the Yellow in a 30ml bottle as less is needed. The perfect way to paint this magnificent kit! TAMIYA LOTUS 49 SET (ZP-1281)
42 February 2015 TMMI 232
p 40-42 NR Access 232MN.indd 42
18/12/2014 10:01
MODELLING TECHNIQUES: MILITARY VEHICLE TAMIYA 1:35 T-55A RUSSIAN MEDIUM TANK ● KIT NO.35257
ANY COLOUR, SO LONG AS IT'S GREEN! Chris Jerrett describes his processes for weathering up one of Tamiya's most popular armour kits, the Russian T-55
P
eople often ask me to recommend post-war tank to build and without hesitation I always recommend Tamiya's 1:35 T-55. The real tank was manufactured in the thousands (20,000 to be exact), it has served in many armies and is still in service today so finding an interesting way to finish it is not a problem. The only thing about my recommendation, is I have never built and finished the kit myself! I only based my opinion on viewing the kit parts, so it was high time to get cracking on this iconic beast and construct one of my own. Modellers like to depict their Tamiya T-55s from various armies from around the world, but I seldom see a Soviet T-55; maybe the plain green paint is not that interesting. So, a Soviet tank it shall be! The kit has parts and decals for five versions, so forming a plan using references was step one. I decided to make my model unique by swapping some kit parts for resin parts that represent earlier tank parts and a box that had a little better detail. At
this point I like to get the heavier work done while there are no small parts on the kit, to avoid damage (Image 1). Some filling and sanding is required in certain areas, although the fit of parts for the kit in general are the best you'll encounter. (Image 2). I cut away all the fenders both front and rear as these are often removed after they are damaged. The Soviet forces in Afghanistan had limited resupply, so once the fenders where gone there was no immediate replacement (Image 3). I rebuilt the hinge detail with plastic rod and card. (Image 4). The kit's plastic turret handles are well done, but I had concerns for the delicate plastic part holding up during the intensive finishing stages, so wire replacements were fabricated and fitted. (Image 5). I used lead foil to remake the exhaust's heat cover, simply by pressing a piece of the foil onto the kit part to producing more realistic ribbing. (Image 6). Other extras used on this model include a metal barrel from Jordi Rubio, Friulmodel metal
tracks and tow-cables from Eureka. These cables are made from pliable wire with cast resin end-pieces. (Image 7). I finished off the build by adding the pipework to the fender fuel tanks using wire, one downside to a T-55 build. Also, the wooden splash plate on the front of the hull was replaced with one I made from plastic card, with some wood grain scribed into the plastic using a scalpel blade. Now the build is complete, it's time to paint. (Image 8)
PAINTING THE MODEL
Painting started with a primer coat and for this I used an acrylic based paint From AK interactive. The paint is pre-mixed and ready to go, straight from the bottle, drying to a smooth, satin sheen. I chose to use black as I wanted to have all recessed areas darkened. (Image 9). As I wanted to finish the model with a rusty appearance from the long fight in the Afghan climate, I started with a rust layer that would be covered and
U
44 February 2015 TMMI 232
p 44-50 T55 232MN.indd 44
18/12/2014 14:07
1
Here we can see the replacement hand-grabs on the turret side, added by the author.
TMMI 232 February 2015
p 44-50 T55 232MN.indd 45
45
18/12/2014 14:07
MODELLING TECHNIQUES: MILITARY VEHICLE TAMIYA 1:35 T-55A RUSSIAN MEDIUM TANK ● KIT NO.35257
3
2
5
4
6
7
V then revealed using paint
chipping fluid (hairspray will work too). For the rust tone I mixed Tamiya X-6 Orange with X-9 Brown (both gloss paints) to create a rusty brown look. I then gave this a gloss clear coat as the next layer would be easier to remove from the smoother surface of the gloss paint. (Image 10).
8
The assembled model, ready for paint. Note the non-standard Jordi Rubio gun barrel.
ANY SHADE OF GREEN!
For the Russian green tone, just about anything will do, as the greens the Russian Army use have a wide variety of tones. I find in my research and in travelling to tank museums that there are as many tones of Russian green as there are Russian vehicles! That being said, I wanted to use a darker green for this project. For my colour I mixed Tamiya XF-13 JA Green with XF-81 RAF Dark Green. White or black paint were added for the highlighted areas and low recessed areas. Some of the rear panels were left off the main hull to ease painting and to create a variety of tones, representing faded paint (Image 11). Now the turret hull and parts were sprayed with chipping fluid (Image 12) and when the fluid was dry (fifteen minutes) I began the chipping process. The areas
9
U
The model was initially base-coated in matt black.
10
Over the black, a layer or rust tones was applied.
46 February 2015 TMMI 232
p 44-50 T55 232MN.indd 46
23/12/2014 13:00
Airbrush Thinner Our Ultimate Airbrush Thinner is specifically formulated to work with ALL brands of acrylic modellers paint. Our blended formula of six ingredients ensures a fast drying, smooth finish every time, no matter what brand of modelling acrylic paint you use.
Airbrush Cleaner Our fast & effective Ultimate Airbrush Cleaner is specifically formulated to work with ALL brands of acrylic modellers paint and all types of airbrush. Our cleaner is not overly aggressive and will not ruin the seals in your airbrush. We have also added a blue dye to the cleaner to be able to distinguish it from our thinner.
Weathering Wash Ultimate Weathering Wash has been formulated with several key non-toxic ingredients to bring you a superior clay based wash to add detail and realism to your model. The six vibrant colours in our range cover the most widely used in modelling. Be aware, the wash will dry slightly lighter than the colour of the bottle and a good shake and stir is recommended before use. Photo-Etch Placer Our photo-etch placer is a re-usable wax based positioning stick that will help you to hold and place even the smallest piece of photo-etch or styrene. A real helping hand when dealing with the more fiddly side of modelling. Modellers Sanders Our range of specially produced Ultimate Modellers Sanders provide an excellent abrasive solution for the discerning modeller. Uniquely shaped they are provided in several grits (100/180/220/220/1200) and a buffer. They are long lasting and washable, which will allow them to be used to their maximum potential with the minimum of waste. Thinny Sticks Our range of Thinny Stick Sanders have been developed specifically to help modellers get to those hard to sand areas on all genres of models. They come in three grits (180/240/1200) and are uniquely shaped to accommodate all your fine sanding scenarios. They are made from the same high quality materials as our Modellers Sanders and are available in packs of six. Thinny Sponges Our Thinny Sponges are designed to compliment our Thinny Stick range. They come in one grit 220, but being a softer sponge it’s equivalent to nearly a 300 grit like the full size Ultimate Modellers Sanders. This will prove to be the go to sander on your bench.
email:
[email protected]
We proudly sponsor p 47 Ultimate 232.indd 8
©adhpublishing.com
web: www.umpretail.com
15/12/2014 11:14
MODELLING TECHNIQUES: MILITARY VEHICLE TAMIYA 1:35 T-55A RUSSIAN MEDIUM TANK ● KIT NO.35257 11
12
13
V where I wanted the chips to
appear were rubbed with a stiff brush dipped in water. The green paint layer sits on top of the chipping fluid and when the water penetrates it, the fluid softens, allowing the green layer on top to lift off in realistic-looking flakes. (Image 13). To keep it realistic I didn't go too far with the chipping. A subtle appearance is what you want to achieve as this is the first step to creating the rust tones (Image 14). The decals were now applied over a clear coat, which is important to protect the soft finish of the chipped layer below (Image 15). After some regular colour-washes of thinned enamels I started with the chipping. I used Vallejo paints for this as it brushes well and covers very well. The chip work started with lightened shades of the green top coat (Image 16). At this point – before the next phase of the chipping – I used green oil paints to blend and fade all the different tones of the main camouflage paint. I simply brushed it on with a fine paint-brush at the edges, then drew it inward on panels with a wide brush moistened with artist's thinner (Image 17). With so many tones of green I like to create an overlaying coloured 'filter' (or glaze) to bring them all together. I sprayed on a light layer of Tamiya X-25 Clear Green diluted with X-22 Clear and thinned with Tamiya Lacquer Thinner. (Image 18). I now followed up with the rust, applying a rust tone in the centre of the light green areas. A piece of sponge can help speed up this process (Image 19). Oil paints were then used to add rust tones and further chipping to the model's surface. I used the same technique to move the oil paint into position as I did with the green tones. I mixed up slightly different shades for various parts of the model to avoid a uniform appearance (Image 20).
Some panels were left off the main hull to ease painting.
The turret, hull and other parts were Water penetrates the top layer, softening sprayed with chipping fluid. the chipping fluid, allowing the green to lift off in realistic flakes. 15
14
Subtlety is what you want to achieve; the first step in creating the rust tones.
the greatest amount of dirt would accumulate. By starting here the colour of the dirt can be established and then replicated in smaller amounts on the top surfaces. I started by completely covering the lower hull with Tamiya XF-72 JGSDF Brown sprayed with the airbrush on low pressure, the paint thinned with 65%
16
The chipping started with lightened tones of the green top layer. 19
Patches of rust were simulated with dark brown, applied with a sponge. 22
The turret number decals were applied over a clear coat, essential in getting them to conform properly.
water to create a dusty look (Image 21). I use the same paint and technique to create dust spots on the top surfaces. The lower hull was covered in a dirt mix of one part real dirt, three parts dust-coloured pigment, one part plaster and two parts Tamiya thinner X-20A. The mixture was plastered on in
17
Green oil paints were used to blend and fade the different paint tones. 20
a random pattern (Image 22). The tone can be adjusted later with darker or lighter pigment colours, flicked on with a stiff brush; I never concern myself with the tone being right or wrong! Multiple applications are required to give it some depth. The pigment I used in the heavy dirt mix was then used on the top
18
An overlaying green-coloured glaze unified the various greens. 21
Oil paints were used to add rust tones The author airbrushed the lower hull and to the model’s surface. with Tamiya XF-72 JGSDF Brown. 23
24
THE WEATHERING
Weathering begins on the lower hull where, obviously,
The lower hull was covered in a ‘dirt mix’ made with real dirt and dust-coloured pigments.
Pigments were used on the upper surfaces where dust might accumulate.
To fix the dust in place, a proprietary fixer from AK interactive was used.
48 February 2015 TMMI 232
p 44-50 T55 232MN.indd 48
18/12/2014 14:08
25
surfaces where dust would accumulate. I simply applied the powder with a fine brush (Image 23). To fix the dust in place I used a proprietary pigment fixer from AK interactive. This is an enamel-based fluid so it can be coloured with enamel paints. (Image 24). I wanted to create an extra-used look to my model, with grease and other various fluid build-ups in and around moving parts. For this, I simply use oil paints to create a black/ brown oily tone I add slow-dry compound to get a thick, glossy mix. The greasy grunge is then carefully appliedwithafinebrush(Image25). To add depth to the dust and dirt I added small amounts of my previous dirt mix on the top surfaces where dirt might accumulate. The mix crumbles easily once it has dried for a day or two. (Image 26)
To create a greasy look, black/brown oil paints were applied by brush. 28
Vallejo paints were used to touch in further highlights, by paint brush.
THE FINISH
With all the weathering done, it was time to fine-tune the effects and revive some effects that may have been buried by the
26
27
More ‘dirt mix’ was applied to the top Pre-mixed enamel washes were used surfaces to enhance to effect. to recreate highlights. 29
‘Wet Effects’ from Mig Productions, was applied with a fine brush.
preceding stages. I first used various enamel colours to recreate highlights (for this I use commercial pre-mixed colours) which are great products that allow you to
30
Pigment was used to create steel highlights; this must be very subtle.
concentrate more on the finish and less on mixing the right tones (Image 27). I then re-highlighted some of the raised surface detail, using Vallejo paints in a
U
TMMI 232 February 2015
p 44-50 T55 232MN.indd 49
49
23/12/2014 13:01
MODELLING TECHNIQUES: MILITARY VEHICLE TAMIYA 1:35 T-55A RUSSIAN MEDIUM TANK ● KIT NO.35257
Views of the finished model reveal the multi-layered finish the author has described on previous pages. By working in this way, a more visually engaging effect can be created, which is much more satisfying to look at than a one-dimensional, single layered finish.
V variety of shades of the
main top coat (Image 28). When a big chunk of steel and metal heats and cools, condensation is inevitable. To create this look of moisture, I used 'Wet Effects' from Mig Productions, which is basically diluted gloss varnish. This was applied with a fine brush (Image 29).
For an ‘boring’ overall green tank, it has many shades and tones of weathering.
FINAL TOUCHES
The final brush work was the silvering of parts that may see continual buffing from the crew. Once again, pigments were used (Image 30). Now that I have completed this iconic military vehicle and model kit, I have to say I was right with all my recommendations. This is one great kit and my research into the tank service has opened up some other possibilities for future builds. ●
MODELSPEC TAMIYA 1:35 T-55A RUSSIAN MEDIUM TANK KIT NO.35257
Paints & materials used;
Tamiya Acrylics; X-6 Orange, X-9 Brown, XF-13 JA Green, XF-81 RAF Dark Green, XF-2 White, XF-1 Flat Black, X-25 Clear Green, X-22 Clear, XF-72 JGSDF Brown, Tamiya Lacquer Thinner AK Interactive; Chipping Color (711), Oil Colors (various shades), European Earth (AK-042), Pigment Fixer (AK-048), Enamel Washes, Dark Steel (AK-086)
The heavy Friulmodel tracks add the perfect finishing touch to the T-55, which had very pronounced ‘track sag’.
Extras used;
Bison Decals (35101), Jordi Rubio barrel (TG65), SKP lenses for T55 (SKP183), Armorscale Soviet Aerial Mount (S35-004), Eureka XXL tow cables (ER-3506), Friulmodel tracks (ATL-01)
Availability;
Tamiya model kits are widely available from good model shops. AK Interactive, Mig Productions, Vallejo; Creative Models; www.creativemodels.co.uk
50 February 2015 TMMI 232
p 44-50 T55 232MN.indd 50
23/12/2014 13:02
Halifax Modellers World
29 Union Street, Halifax, HX1 1PR
A Selection of New Releases... Military TAKOM AFV CLUB DRAGON TRUMPETER
Mark IV Tadpole Tank.................................£49.99 AEC Matador Mid Prodn............................£49.99 British Saladin Mk.II Armoured Car.........£45.00 Scud-B Ballistic Missile & Launcher.......£89.00
Aircraft TAMIYA ACADEMY AIRFIX TRUMPETER
1/32 Vought F4U-1A Corsair.......................£94.99 1/48 F-4J Phantom.......................................£39.99 1/48 Gnat Red Arrows.................................£16.99 1/48 DH Hornet F1........................................£26.99
Tel/Fax 01422 349157 Shop Hours:Mon,Tues,Thur 10.30-17.30, Wed closed, Fri 10.30-17.00, Sat 9.30-17.00, Sun 10.30-16.30
POST & PACKING UK £2.00
www.halifaxmodellersworld.co.uk
p 51 ADs Collated 232.indd 2
15/12/2014 11:33
New Releases A selection of the latest full kits in plastic, resin, metal and more!
What’s in the box?
AD; ACETATE DIALS, BB; BASE BOARD, CC; CAST CERAMIC (PLASTER), CMA; CAST METAL ALLOY, CP; CHROMED PARTS, CPS; CLEAR PLASTIC SHEET, DT; DRY TRANSFER (DECALS), EPS; EXTRUDED PLASTIC SECTION, F; FABR MW; METAL WIRE, MT; METAL TUBING, NM; NYLON MESH, PE; PHOTO ETCH, PCM; PRE-CUT MASKS, R; RESIN, SVT; SOFT VINYL TYRES (OR TUBING), VF; VINYL FIGURES, VFP; VACUUM FORMED (PLASTIC), WC; WOVEN COR
TAMIYA, JAPAN
JAGDPANZER IV /70 (V) LANG SD.KFZ.162/1 www.hobbyco.net SCALE; 1:35 • MATERIALS: IM, SVT, WS KIT NUMBER; 35340 We looked at this new kit briefly last issue, and of course there’ll be a fullbuild article coming up soon. Now we actually have the full-production model in hand, it’s interesting to see the features close at hand. The kit comes in a smaller than expected box with truly magnificent box-art, emphasising the low-slung stance of the vehicle. Just four sprues plus upper and lower hulls will be found in the box, all moulded in standard sand-yellow polystyrene. The tracks are the one-piece style, soft vinyl type and are excellent. Even if you do not like this type of track, don’t just fling them in the bin, they really are very good. Surface detail on the kit plastic parts is superb and Tamiya’s ability to engineer parts for a watertight fit is widely in evidence. MN
It’s good to know that a modern Tamiya rendition of this significant WW2 German design now exists One-piece tracks are not for everyone, regardless of how good they are
TAMIYA, JAPAN
SUBARU BRZ STREET CUSTOM www.hobbyco.net SCALE; 1:24 MATERIALS: IM, SVT, PCM, PEB, WS KIT NUMBER; 24336 In this ‘Street Custom’ edition of the 1:24 Subaru BRZ we have new wheels, exhausts, body trim and engine bay brace, plus black or white body stripes in decal form. A well detailed engine, the block of which is cleverly moulded in with the front wheel-arch liners is supplied and with the ancillary parts added it looks excellent. Chromed tips are provided for the revised exhaust, while the new wheels come in satin chrome. Found within the decal bag are two extremely welcome additions; a sheet of pre-cut window masks for the windscreen’s black edges and chromed and self-adhesive mirror faces and badge plates, excellent stuff. MN
An appealing street version of the BRZ with some neat new custom goodies Nothing bad to report here!
52 February 2015 TMMI 232
p 52-55 NR Kits 232MN.indd 52
18/12/2014 10:04
Kit Reviews
STIC SECTION, F; FABRIC, IM; INJECTION MOULDED (PLASTIC), ITL; INDIVIDUAL TRACK LINKS, LCC; LASER CUT CARD, LLT; LINK AND LENGTH TRACKS, MC; METAL CHAIN, MMA; MACHINED METAL ALLOY, MR; METAL ROD, TIC), WC; WOVEN CORD, WS; WATERSLIDE (DECALS)
REVELL, EUROPE PLUS MODEL, CZECH REPUBLIC
US MOTOR GRADER www.creativemodels.co.uk SCALE; 1:35 • MATERIALS: R,PE, WS KIT NUMBER; 426 Plus Model offer some weird (in a good way) and wonderful kits and their latest will please many armour modellers who are looking for something a little different to build. It’s a road scraper of the type used by the US forces from the 1940s, 1950s and right up to the Vietnam War and also by civilian engineers. Perhaps the best known users of this machine was the United States Navy Construction Battalion, the famous ‘SeaBees’, who used them in the Pacific to build landing strips for US aircraft. The kit is cast in pale greengrey resin plus a sheet of photo-etched brass, waterslide decals and some copper wire. Also in the box is a clearto-follow instruction booklet and a CD of images that show the model during construction which is very useful. A complex but fantastically original kit with a huge amount of detail. MN
Wonderfully inventive subject choice, highly detailed castings with lots of weathering potential Some experience working with resin and photo-etched metal will be required
VW GOLF I GTI www.revell.de/en SCALE; 1:24 • MATERIALS: IM, WS KIT NUMBER; 070702 Even after several decades, the VW Golf Mk.I is still one of the best car designs of all time and examples in good condition can still demand impressive quantities of cash. This new-tool kit from Revell is therefore very welcome, and a mighty fine job they have done of it. One look at the bodyshell alone shows that the designers have studied the car in detail; its profile appears to be spot-on. The model comes with full engine detail, suspension system and a comprehensive interior which includes options for a left or righthand drive vehicle (dashboard and foot pedal positions), a nice touch. The iconic golfball gear-knob is replicated in miniature and decals are provided for the tartan seat panels inserts; fantastic! MN
A motoring icon with an accurate profile and full detail inside and out Impossible to criticise here – it’s a Golf GTi Mk.I! TMMI 232 February 2015
p 52-55 NR Kits 232MN.indd 53
53
18/12/2014 10:04
New Releases A selection of the latest full kits in plastic, resin, metal and more!
What’s in the box?
AD; ACETATE DIALS, BB; BASE BOARD, CC; CAST CERAMIC (PLASTER), CMA; CAST METAL ALLOY, CP; CHROMED PARTS, CPS; CLEAR PLASTIC SHEET, DT; DRY TRANSFER (DECALS), EPS; EXTRUDED PLASTIC SECTION, F; FABR MW; METAL WIRE, MT; METAL TUBING, NM; NYLON MESH, PE; PHOTO ETCH, PCM; PRE-CUT MASKS, R; RESIN, SVT; SOFT VINYL TYRES (OR TUBING), VF; VINYL FIGURES, VFP; VACUUM FORMED (PLASTIC), WC; WOVEN COR
ZVEZDA, RUSSIA
SD.KFZ.251/1 AUSF.B STUKA ZU FUSS www.hobbyco.net SCALE; 1:35 • MATERIALS: IM, WS KIT NUMBER; 3625 This model from Russian model manufacturer Zvezda we have the company’s excellent Sd.Kfz.251 ausf. B (early variant) with new, additional parts to create the multiple ‘Stuka Zu Fuss’ wurfrahmen rocket launcher system. It transforms the workaday ‘251 into a fearsome-looking ‘Stuka on foot’ rocket launcher version, giving the modeller some appealingly complex structures to assemble. Three rows of bolt-on, tubularframework mounts straddle the fighting compartment, to which the rocket rounds are fitted, within there wooden launch ‘boxes’. The kit is well detailed and comes with individual-link tracks and a complete engine, viewable through the open access hatch. MN
A fascinating conversion on the ‘251 hull, turning the humdrum halftrack into a deadly rockethowitzer Individual link tracks require some patience to assemble
EDUARD, CZECH REPUBLIC
M4A1 SHERMAN PROFIPACK www.eduard.com SCALE; 1:35 • MATERIALS: IM, PE, SVT KIT NUMBER; 3716 In this new release from Eduard, we have the superb plastic mouldings from Asuka (formerly Tasca) masking up the bulk of the tank, with supplementary photo-etched set from Eduard providing mud guards and mounting strips, tool brackets, M2 .50cal parts plus other useful items and a new sheet of decals for two D-Day/Normandy Shermans and two machines based in Italy, 1944. The kit parts are sublime, making this easily the best out-of-the-box M4A1 yet produced, and with the extra metal parts and new markings, it really is a fantastic production. MN
Superb Asuka Model (Tasca) mouldings, plus excellent Eduard photo-etch Very few if any issues here, although it’s a complex kit and not a quick build
54 February 2015 TMMI 232
p 52-55 NR Kits 232MN.indd 54
18/12/2014 10:05
Kit Reviews
STIC SECTION, F; FABRIC, IM; INJECTION MOULDED (PLASTIC), ITL; INDIVIDUAL TRACK LINKS, LCC; LASER CUT CARD, LLT; LINK AND LENGTH TRACKS, MC; METAL CHAIN, MMA; MACHINED METAL ALLOY, MR; METAL ROD, TIC), WC; WOVEN CORD, WS; WATERSLIDE (DECALS)
KITTYHAWK, CHINA
OV-10D BRONCO www.hannants.co.uk Scale; 1:32 • Materials; IM, PE, WS Kit number; KH32003 This is a kit that we have been pretty excited about at TMMI and now it’s here, it is fascinating to see it ‘in the plastic’. Kittyhawk have really gone to town with this model and the parts breakdown is extensive and complex; seven large sprues of grey polystyrene make up the airframe and ordnance with a large clear sprue for ‘that’ canopy.. The latter area is crucial to the success of the model and sensibly, it has been broken down into individual panels which should ease both the masking/ painting process as well as fitting to the model. The airframe is beautifully rendered with fine recessed panel lines and even finer rivet lines, all well within scale and authentic-looking. The cockpit is highly detailed (just as well with so much on show) and both turboprop engines depicted in full and able to be seen thanks to cowlings that can be installed in the open position. MN
An amazing looking kit with a ton of detail in all the key areas. Three markings options (X2 USMC, X1 USN) included Not one for the faint of heart, or short of time!
WINGNUT WINGS, NEW ZEALAND
HANSA-BRANDEBERG W.12 EARLY www.wingnutwings.com Scale; 1:32 • Materials; IM, PE, WS Kit number; 32036 Wingnut Wings did well with their Hansa-Brandenburg W.29, mainly, we suspect, due to the relative lack of rigging required; the kit is now sold out. This new release should also do well; the W.29’s cousin may be a biplane but it still has minimal wirework and should therefore appeal to modellers (like me) who are rigging virgins... As with all their preceding WW1 aircraft kit releases, this new model consists of gorgeous grey plastic sprues crammed with refined parts covered on all surfaces with extraordinary levels of detail. The instructions are some of the best in the business and it comes with sheets of amazing decals, providing the lozenge camouflage fabric. Utterly wonderful. MN
Some of the best model kits ever released and this reduced-rigging W.12 should sell well, so buy now! Any criticism would be cruel, this is an absolute beauty TMMI 232 February 2015
p 52-55 NR Kits 232MN.indd 55
55
18/12/2014 10:05
KIT PREVIEW REVELL 1:144 US NAVY LANDING SHIP MEDIUM (EARLY) ● KIT NO.05123
Rain guards are moulded over the bridge windows.
A LARGE-SCALE MEDIUM, WELL DONE! Revell’s latest ship kit depicts the United States Navy LSM and comes with a complement of tanks, armoured cars and trucks
T
his very attractive new kit from Revell depicts a WW2 United States Navy LSM, a medium-size vessel designed specifically for beach landings. Over 550 LSMs were used from the middle of 1944 onwards by the US Navy in the Pacific Theatre of Operations while fighting the Imperial Japanese forces. They formed the main component of the US amphibious force, with a loading capacity of an LSM roughly equivalent to a mechanized platoon. The LSM had an anchor at the stern, allowing the ship to pull itself off the beach independently, thereby offering a quick turn-around in action. The LSM had double bow-doors and steel ramp for direct vehicle disembarkation onto the beach. The entire central
channel was built as an open deck for vehicles and equipment, with a pair of defensive gun turrets just behind the bow, amidships and above the stern, each mounting a 20mm Oerliken gun. Revell’s model is in the scale of 1:144, half the size of 1:72, so the kit is of a good size (443mm) as you can see in the photos below. The hull is split in half lengthways and as the ship has a flat bottom, there should be no need for any cutting to depict it in a seascape/landing scene. The bow doors and ramp are hinged and can be posed in the open or closed positions and a display based is included in the box to show off the model in its full-hull configuration. Revell haven’t been stingy with a cargo load for the model; they
provide three M4 Shermans, three M8 Greyhounds (a few were deployed to the PTO) and three GMC trucks to fill the deck, plus decals for four ships, all USN based in the Pacific; LSM-14, 1944, LSM-133, 1944, LSM-201, 1945 and LSM-210, 1945. The only thing missing is a crew; in this scale, fully-round figures would be needed and they would bring a touch of human life and scale to this otherwise excellent kit. ●
MODEL SPEC SCALE: . . . . . . . . . . . . . . . . . . . . . . . . . 1:44 MATERIALS: . . . . . . . . . . . . . . . . . . IM, WS Availability: Good model shops everywhere www.revell.de/en TMMI’S OPINION? A excellent kit with a high level of detail and lots of diorama potential. A handful of USN crew figures would really bring it to life.
Detail view of the hull’s belly plate.
The massive anchor, used to unbeach the LSM after unloading.
Detail on the underside of a gun-tub.
Forward upper section of deck with ladders to the bow.
Close-up of a structural element.
In these views we can appreciate the side of the model as it sits in the Editor’s hand. The flat bottom will allow for easier seascape creation.
Ship’s boats are well detailed. Bow doors feature internal rib detail.
The model comes with a selection of M4 Shermans, M8 Greyhounds and GMC trucks, all very well detailed.
56 February 2015 TMMI 232
p 56 RevellLSM Pre 232MN.indd 56
Strengthening ribs under a platform.
18/12/2014 10:12
NEW in the ‘HOW TO BUILD...’ series HOW TO BUILD... REVELL 1:32 SPITFIRE MK.IIA The name Spitfire has now become synonymous with an entire island people, and their battle to maintain their freedom in the shadow of the Nazi jackboot. The very shape and sound of the Spitfire seems to still invoke and embody the usually reserved pride of the British person. It is probably true to say that Reginald Mitchell’s beautiful aircraft design is one of the most easily recognised and much-loved shapes that ever took to the skies. When actual mass production of the Spitfire ceased in 1948, over 20,000 machines had been built, and operated by over thirty countries around the world. This iconic series saw service with the RAF right up until the mid-1950s. It also saw service with the Irish Air Corps as late as 1961; a full 26yrs after the flight of the prototype K5054. Revell has now released an all-new 1:32 scale Supermarine Spitfire Mk.IIa. With some minor modifications, this model may also be built as a Mk.I or a Mk.Va. Over the course of five Chapters, James Hatch examines the kit contents in detail, describes construction of the model with lavish illustrations, and points out the areas of the kit that may be improved and corrected. This new book features an exhaustive step-by-step guide to construction; plus a painting and weathering tutorial. A number of essential reference resources are also included. More than 200 photos, a reference guide, and photos of the kit sprues are all included - a must have before you build the model!
Only
£9.95
plus p&p
ALSO AVAILABLE Visit adhbooks.com for details PLACE YOUR ORDER NOW ON TEL: 01525 222573 FAX: 01525 222574
✁
Revell 1:32 Spitfire Mk.IIa book HOW TO BUILD... SPITFIRE Name ..................................................................................................................... Address................................................................................................................ ...................................................................................................................................
Please debit my credit/debit card for £ ....................................... Visa
Mastercard
Maestro
P&P: UK; £2.00 Europe; £4.00 World-Wide airmail; £6.00 Cheques payable to: ADH Publishing Ltd.
other .............................
Card No. .................................................................................................... Expiry date................................. Start date ........................................
...................................................................................................................................
Security Number (last 3 digits on signature strip) ............................
Post/zip code ...................................................................................................
Issue No (if applicable) ........................................................................... Date ............................................................................................... Please mail this form to; ADH Publishing, Doolittle Mill, Doolittle Lane, Totternhoe, Bedfordshire, LU6 1QX, United Kingdom Tel; +44(0)1525 222573 Fax; +44(0)1525 222574 Online; www.adhbooks.com (Photocopies of this form are acceptable)
Country ................................................................................................................ Telephone Number.......................................................................................
Signature .....................................................................................
www.adhbooks.comwww.adhbooks.comwww.adhbooks.com p 57 Spitfire Book 232.indd 8
15/12/2014 11:17
Book Reviews GOT A NEW BOOK? IF YOU ARE A PUBLISHER WITH A NEW MODELLING RELATED TITLE TO PUBLICISE, WHY NOT SEND IN A COPY FOR REVIEW HERE?
341 SQUADRON, 60 YEARS
IOANNIS LEKKAS, EAGLE AVIATION www.eagleaviation.gr • ISBN 978-960-93-6058-6 The Hellenic Air Force has had some iconic aircraft in its inventory over the years, including the F-86 Sabre, Northrop F-5A, F-5B and more recently, the F-16. It is the latter aircraft that forms the majority of this book’s content and it is given a detailed and very stylish presentation within the eighty-four+ hard-bound pages. Specifically, the book commemorates sixty years of 341 Squadron, established in July 1954 and from a modeller’s perspective it offers some fantastically clear and sharp images of the F-16, showing structural and technical details as well as paint finishes, weathering effects and markings. A wonderful production with excellent photography. MN
TRACKS AND WHEELS, THE DEFINITIVE GUIDE FOR ALL KIND OF EFFECTS; NATURE, WEATHERING ETC
RUBÉN GONZALES, MICHEL PÉREZ, AK INTERACTIVE www.creativemodels.co.uk The focal-point of a model truck or tank is quite often its wheels or tracks and if they are not realistically treated they can make or break the finished effect. This new book aims to address any problems you might have in this area, with eighty-four+ pages on how to prepare and realistically paint and weather wheels, tyres, tracks and tank roadwheels. Excellent quality colour photography, arranged in easy to follow sequences make this easy to follow. As you might imagine, the finishing materials are by AK Interactive, but as they are of excellent quality and tailored to specific modelling tasks, it’s not a problem; if you prefer to use other materials then just substitute them where appropriate. A very handy companion to have by the workbench. MN
58 February 2015 TMMI 232
p 58-59 Books 232MN.indd 58
18/12/2014 10:14
DAS VERGESSENE AS, DER JAGDFLIEGER GERHARD BARKHORN
LEICHTE FELDHAUBITZE 18 GW II LE.F.H.18/2 ‘WESPE’ AND ‘HUMMEL-WESPE’, NUTS & BOLTS VOLUME 33
J.BASCHIN, M BLOCK, H TIPPMANN, NUTS & BOLTS www.historexagents.com Volume 2 in the Nuts & Bolts series was on the Wespe SPH, but the latest edition, No.33 completely supersedes it, with many more pages and material; it’s certainly not just a minor upgrade. Within its not insubstantial 188 pages we are given a very thorough treatment of the subject, from an extensive selection of wartime images (black and white, in action shots taken by PK photographers and crews, plus some factory photos), detailed drawings of the le.F.H.18M howitzer that armed the Wespe, plus drawings of the vehicle itself. Following this we have colour profiles that exhibit the surprising variety of camouflage schemes applied to the Wespe, then a generous selection of photos showing preserved examples of the gun and the vehicle in various collections worldwide. We finish up with a modelling section that features Tony Greenland’s superb 1:35 AFV Club le.F.H.18 and heavily up-detailed Tamiya Wespe, also in 1:35. A fantastic production that’ll be an essential companion for anyone wanting to construct a highly detailed, accurate replica of this well known WW2 SPG. MN
BERND BARBAS, LUFTFAHRTVERLAG START www.luftfahrtverlag-start.de ISBN 978-3-941437-22-7 Gerhard Barkhorn scored a massive 301 ‘kills’ while flying on the Eastern Front with Jagdgeschwader 52 in World War Two, which, after Erich Hartmann, made him the second highest-scoring fighter pilot of the conflict. However today, he is almost forgotten. This impressive new 208+ page, hard-bound book from German publisher Luftfahrtverlag Start chronicles Barkhorn’s wartime experiences with Jagdgeschwader 2 over the English Channel, Jagdgeschwader 52, Jagdgeschwader 6 and finally Jagdverband 44. The book is produced to an extremely high standard, using glossy art-paper to make the very best of the many wartime photographs that make it so irresistible to modellers and WW2 historians alike. Excerpts from original combat reports offer the reader a chance to get a taste of the dramatic events of aerial combat, and maps are included throughout to show where the action took place. But it is the fabulous and rare wartime photos, a good number of which are in real colour, scanned from original Agfa slides (not colourised) that are the star of the book, making it worth every penny of the fifty-four Euro asking price. If you’re into Luftwaffe subjects and also want to read up on one of Germany’s most unsung aces, this book is unmissable. MN
TMMI 232 February 2015
p 58-59 Books 232MN.indd 59
59
18/12/2014 10:14
MODELLING PROJECTS US ARMY M8 GREYHOUND
dIORAMA IDEAS... This month, a well known shot of the US Army M8 Greyhound named ‘Colbert’ (USA 6033442-S)
P
robably one of the best known US Army M8 Greyhounds is C-30 ‘Colbert’ of 3rd Platoon, C Company, 82nd Armored Reconnaissance Battalion, 2nd Armored Division. The vehicle sits in the street of a Normandy town as the crew observe a terrace of houses on fire. Of note for modellers is the extensive stowage on the outside of the turret; there wasn’t much space inside for crew gear. Other interesting details include the rear-facing .50cal heavy MG, the tied-back radio aerial and what appear to be bright metal tin cans on the hull-side stowage rack behind the front wheel. ●
In model form Tamiya’s 1:35 M8 was released quite a few years back but is still a superb model, with the company’s legendary standards of parts-fit and fine detail. ‘Colbert’ is such a well known machine, it forms one of the subjects on Tamiya’s decal sheet. In the years following the model’s release, many aftermarket products have been issued, offering replacement resin wheels, photoetched sheet metal replacement parts and more, so you can really go to town on the model. Italeri also offer their own 1:35 kit of the Greyhound and it’s a good quality production; perhaps not as refined as Tamiya’s model but good in its own right. Tamiya also offer the model in 1:48. www.hobbyco.net
60 February 2015 TMMI 232
p 60 DioramaIdea 232MN.indd 60
18/12/2014 10:15
NEW in the ‘HOW TO BUILD...’ series HOW TO BUILD... TAMIYA’S ARMOUR KITS IN 1:35 Though the modelling world is awash with an incredible variety of military vehicle kits from a huge number of different companies, one stands head and shoulders above the others in terms of originality, buildability and fun. That company is Tamiya, who have consistently provided the budding enthusiast with some of the finest kits available in the scale of 1:35. This new book brings together five detailed features that will show what is possible from this extensive range of kits. In so doing, it offers hints and tips, detailed step-by-step guides and written descriptions on all manner of techniques from basic construction, through detailing, painting and realistic weathering. No stone is left unturned in the quest to inspire the modeller to complete similar projects for themselves. It really is a one-stop-shop for the budding military modeller! Within its 84 pages you will five find features that take you through the construction and painting of the ‘Easy Eight’ Sherman, Nashorn, Elefant, Gama Goat and Tiran 5, all expertly put together by our renowned team of authors, Spencer Pollard, Brett Green and Marcus Nicholls, who have created one of the finest collections of modelling features ever published, on this famous range of kits. This then is the world of Tamiya’s wonderful 1:35 military vehicle kits plus p&p – we hope that you enjoy your visit!
Only
£12.95
ALSO AVAILABLE Visit adhbooks.com for details PLACE YOUR ORDER NOW ON TEL: 01525 222573 FAX: 01525 222574
✁
Tamiya’s Armour Kits in 1:35 book HOW TO BUILD... ARMOUR Name ..................................................................................................................... Address................................................................................................................ ...................................................................................................................................
Please debit my credit/debit card for £ ....................................... Visa
Mastercard
Maestro
P&P: UK; £2.00 Europe; £4.00 World-Wide airmail; £6.00 Cheques payable to: ADH Publishing Ltd.
other .............................
Card No. .................................................................................................... Expiry date................................. Start date ........................................
...................................................................................................................................
Security Number (last 3 digits on signature strip) ............................
Post/zip code ...................................................................................................
Issue No (if applicable) ........................................................................... Date ............................................................................................... Please mail this form to; ADH Publishing, Doolittle Mill, Doolittle Lane, Totternhoe, Bedfordshire, LU6 1QX, United Kingdom Tel; +44(0)1525 222573 Fax; +44(0)1525 222574 Online; www.adhbooks.com (Photocopies of this form are acceptable)
Country ................................................................................................................ Telephone Number.......................................................................................
Signature .....................................................................................
www.adhbooks.comwww.adhbooks.comwww.adhbooks.com p 61 Armour Book 232.indd 8
15/12/2014 11:19
BuyersGuidesBuyersGuidesBuyersGui ADVERTISE HERE!
If you are reading this then so are thousands of others! FOR INFORMATION call GARETH on 01525 222573
AVIATION & MILITARY BOOK CENTRE Tel: 0845 260 4413 PO BOX 4413, ATHERSTONE, WARWICKSHIRE, CV9 9AS
Aviation and Military Books and Magazines
Hurricane models Tel: 01992 447346
7 Impresa Park, Pindar Road, Hoddesdon, Herts EN11 0DL
10.00am - 4.00pm Monday to FRIDAY
Phone lines open 10am-6pm Mon-Fri, 10am-1pm Sat-Sun Phone, write or visit us online.
[email protected] www.aviationbookcentre.com
Tamiya Radio Controlled Models and Plastic Model Kits of cars, bikes, boats, tanks and planes from Tamiya and most Major Brands always in stock. Racks of paints and a range of Airbrushes always in stock.
mastercard/visa/switch/paypal/cheques/cash/postal orders
mastercard/visa/Switch/amex/delta
avid reader
Tel: 01299 823 330 Fax:01299 829 970
Unit 10, Hodfar Road, Sandy lane Ind Estate, Stourport On Severn, Worcestershire, DY13 9QB
Military, Aviation, Naval, Modelling, Railways, Car & Motorcycle Books 9.30 – 4.30 Monday to Friday By Appointment Only
www.bookworldws.co.uk
[email protected]
Visa/MasterCard/Maestro
Gee DEE MODELS Tel: 0115 9412211 Fax: 0115 9417717
21 Heathcoat Street, Nottingham, Nottinghamshire, NG1 3AF Moday to Friday 9.30am - 5.30pm Saturday 9am-5.30pm Specialising in plastic kits, diecast, boats, planes and cars ESTABLISHED 1946
www.geedee-modelshop.com
MAIL ORDER
HALIFAX MODELLERS WORLD
Tel: 01422 349157
Halifax Modellers World , 29 Union Street, Halifax, HX1 1PR
All Models,All Makes,All Scales. Opening Hours: Mon,Tues,Thur 10.30-17.30,Wed Closed, Fri 10.30-17.00,Sat 9.30-17.00,Sun 10.30-16.30
www.halifaxmodellersworld.co.uk
[email protected] www.hurricanemodels.co.uk
Kit krazy model shop Tel: 020 8298 7177
303 The Broadway, Bexleyheath, Kent DA6 8DT New and pre-owned kits. Collections bought and sold Aircraft, military, cars, ships, bikes & scifi (70p S.A.E for our list)
Opening hours: 9-30am-5.30pm (closed Wednesday & Sunday)
You can also find us at most major model and airshows throughout the year
www.kitkrazy.com
Up to 20% Discount on mail order
WWW.LITTLE-CARS.COM Tel: 01234 711980
(24hr answer phone)
We aim to stock all the tools and accessories you will ever need. Micro Mesh, Hold & Fold, Detailing Wire and Mesh, Iwata Airbrushes, MIG pigments, Adhesives.
FROM TINY TWEEZERS TO SIZEABLE SPRAY BOOTHS! Swan & Excel knives, Vallejo, Aztek Airbrushes, Actulite, A300S-D Extractor. Lazertran Decal paper, Deluxe Rust & Snow, Zona Saws, Alclad II, Microbrushes... Multimedia Car kits, Eduard, Sweet and Areotech Aircraft kits. Buy direct or see us at your local model show
email:
[email protected]
CREDIT CARDS ACCEPTED
HIROBOY
Tel: +44 (0)7977 125967
(8-00am - 4-30pm)
The UK’s largest mail order company specialising in Scale Automotive model kits with a large selection of aftermarket detailing parts, accessories, books and loads more Unit 59, Basepoint Business Centre, Oakfield Close, Tewkesbury Business Park, Tewkesbury, Glos. GL20 8SD, United Kingdom.
Email:
[email protected]
www.hiroboy.com Open: Monday-Thursday: 8.00-4.30, Friday: 8.00-2.30
ADVERTISE HERE!
THE MODEL SHOP
Tel: 01606 47740 Fax: 01606 47740
If you are reading this then so are thousands of others!
167 Witton Street, Northwich, Cheshire, CW9 5EA
For INFORMATION, call Gareth on 01525 222573
plastic kits, radio control, slot car & model railways MASTERCARD/VISA/SWITCH/AMEX
Finescale model world ltd Tel/Fax: 01902 650077 MAIL ORDER AND WEBSITE SALES
plastic kits, airbrushes, primers, paints, tools, glues, static grass & accessories
www.finescalemodelworld.co.uk
[email protected]
p 62-63 BuyerGuide 232.indd 62
all major credit cards
OPEN Mon-Sat 9.30am-5.00pm
email:
[email protected]
www.themodelshop.org
D-9 models
Tel/Fax: 01633 222282
D-9 Models, Newport Indoor Market, Newport, South Wales NP20 1DD
Monday to Saturday 9am - 4.30pm SPECIALIST PLASTIC KIT MODEL SHOP. Brands include tamiya, trumpeter, italeri, revell, dragon, afv, hasegawa, roden, eduard and more
www.d-9models.co.uk
[email protected]
all major credit cards. mail order
15/12/2014 11:24
W
SGUIDESBUYERSGUIDESBUYERSGUIDESBUYE
NEVER MISS AN ISSUE
Subscribe now and get the next 12 issues delivered to your door before before they hit the shops
£44 (UK) • £56 (Europe) • £69 (World-wide) • www.tamiyamodelmagazine.com Call: +44 (0)1525 222573 • Email:
[email protected]
WEBDIRECTORYWEBDIRECTORYWEBDIRECTO www.hobbyco.net dragon.com
www.ebbro.com Finest Quality Models
www.creativemodels.co.uk
tamiya.com italeri.com
www.tamiyamodelmagazine.com www.missing-lynx.com www.hyperscale.com
p 62-63 BuyerGuide 232.indd 63
15/12/2014 11:24
Contact details for companies featured in TMMI... ● ACCURATE ARMOUR/ ARMOUR DISTRIBUTION Units 15-16 Kingston Industrial Estate, Port Glasgow, Inverclyde, PA14 5DG Scotland. Tel; 01475 743 955 Fax 01475 743746 www.accurate-armour.com ● THE AIRBRUSH COMPANY Ltd 79 Marlborough Road, Lancing Business Park, Lancing, West Sussex, BN15 8UF, +44 (0) 1903 767800 www.airbrushes.com ● AIRCONNECTION Box 21227, RPO Meadowvale Mississauga, ON L5N 6A2, Canada Tel (905) 677-0016 Fax (905) 677-0582
[email protected] [email protected] www.airconnection.on.ca ● AIRWAVES Via Hannants www.hannants.co.uk ● ALCLAD II No.5 St Georges Close, Bacton, Norfolk, NR12 0LL. www.alclad2.com Tel; 01692 652166, Fax; 01692 652334 ● AMPERSAND PUBLISHING (via Historex Agents in UK) 235 NE 6th Avenue #4 Delray Beach, Florida 33483-5543, USA Tel; 561-266 9686, Fax; 561-266-9786 ● ARCHER (Historex in UK) PO Box 1277 Youngsville, NC 275961277, USA www.archertransfers.com ● BADGER AIRBRUSH 9128 W. Belmont Avenue, Franklin Park, IL 60131, USA 800-AIR-BRUSH • Fax: 800-57BADGER www.badgerairbrush.com
[email protected] ● BISON DECALS Available from www.hannants.co.uk and www.pdi-model-supplies.com ● CAMMETT AND CO (Lifecolour, Scale Caliber) Unit 5 Forest Road, Greenfield Industrial Estate, Hay-on-Wye, HR3 5FA, United Kingdom Phone; 01497 822757 Email;
[email protected] www.cammett.co.uk ● CLASSIC PUBLICATIONS Midland Counties Publications, 4 Watling Drive, Sketchley Lane Industrial Estate, Hinckley, Leics UK LE10 1YF Tel: +44(0) 1455 233 747, Fax: +44(0) 1455 233 737
[email protected] www.classic-publications.com ● CREATIVE MODELS LTD (Mig Productions, Vallejo, Accurate Miniatures); Unit 6-10, Honeysome Industrial Estate, Honeysome Road, Chatteris, Cambridgeshire PE16 6TG Tel/Fax; 01354 760022 www.creativemodels.co.uk
[email protected] ● CZECH SIX PUBLICATIONS 48 Station Road, Stoke D’Abernon, Cobham, Surrey, KT11 3BN UK Tel; 01932 866426 www.czechsixpublications.com ● DRAGON MODELS (The Hobby Company in UK) Dragon Models Ltd, Kong Nam Ind. Building B1-10F, 603-609 Castle Peak Road, Tsuen Wan NT, Hong Kong Fax (HK) 4110587 www.dragonmodelsltd.com
(For 1:6 Action Figures, please contact Amerang in UK)
● ECHELON FINE DETAILS Available from; wwwaccurate-armour. com & http://pachome1.pacific.net. sg/~kriegsketten/
● EAGLE EDITIONS Ltd PO Box 580 Hamilton MT 59840 USA406 Tel; 363 5415, Fax; 406 375 9270
[email protected] www.eagle-editions.com ● FANTASY PRINTSHOP The Palms Oasis, New Portreath Road, Bridge, Cornwall, TR16 4QL ● FROME MODEL CENTRE 1/2 Catherine Street, Frome, Somerset, BA11 1DA, UK +44 (0) 1373 465295 www.frome-model-centre.com
[email protected] ● GRAND PRIX MODELS 4 Thorpe Close, Thorpe Way, Banbury, OX16 4SW. Tel; 01295 278070 Fax; 01295 278072 www.grandprixmodels.com
[email protected] ● GREENHILL BOOKS Park House, 1 Russell Gardens, London NW11 9NN, UK Tel 020 8458 6314 Fax 020 8905 5245 www.greenhillbooks.com
[email protected]
● MODEL WHOLESALE UK LTD Unit 3 Dean Close, Raunds, Northants NN9 6BD Tel; 01892 680009 Fax:01892 522526
[email protected] www.modelwholesaleuk.com ● MODUNI VERSAND GMBH Böttgerstr. 2-14, 65439 Flörsheim, Germany Tel; 06145 5456-0 Fax; 06145 5456-11
[email protected] www.moduni.de ● MONROE PERDU Monroe Perdu Designs, 3168 Renee Court, Simi Valley, CA 93065, USA. www.monroeperdu.com ● PANZERWRECKS PO Box 164, Heathfield, Sussex TN21 8WA, UK www.panzerwrecks.com ● PEGASUS HOBBIES (Selected items via Pocketbond in UK) 5515 Moreno Blvd, Montclair, CA 91763 USA www.pegasushobbies.com
● GUNZE SANGYO MDC in the UK
● PLUS MODEL (Creative Models in UK) Jizni 56, 370 10 C. Budejovice, Czech Republic.
[email protected] www.plusmodel.cz
● HANNANTS Harbour Road, Oulton Broad, Lowestoft, Suffolk, NR32 2LZ. Tel 01502 517444 Fax 01502 500521 www.hannants.co.uk
[email protected]
● POCKETBOND LTD (Trumpeter & AFV Club in UK) PO Box 80, Welwyn, Hertfordshire, England, AL6 0ND Tel 01707 391509 Fax 01707 327 466
[email protected]
● HIKOKI PUBLICATIONS LTD Ashtree House, Station Road, Ottringham, East Yorkshire, HU12 OBJ, UK
● POL MODELS 64 Cumberland Road, Acton, London, W3 6EY UK
[email protected]
● HIROBOY (Zero Paints) Unit 59, Basepoint Business Centre Oakfield Close, Tewkesbury Business Park, Tewkesbury, Glos. GL20 8SD UK Tel: 07977125967 (UK office hours only) www.hiroboy.com
● PSP MODELS LTD (Mission Models in USA) Unit 19B, Applin’s Farm, Farrington, Dorset DT11 8RA, UK Phone/fax: +44 (0)1747 811 817 www.psp-models.com
● HISTOREX AGENTS Wellington House, 157 Snargate Street, Dover, Kent, CT17 9BZ, UK Tel 01304 206720 Fax 01304 204528. www.historex-agents.co.uk
[email protected]
● QUICKBOOST www.quickboost.net
● HOBBYLINK JAPAN Sano-shi, Kurohakama-cho 162-1 Tochigi 327-0813, Japan www.hlj.com ● HUSSAR PRODUCTIONS, CANADA www.airconnection.on.ca ● ITALERI (The Hobby Company in UK) Via Pradazzo, 6, I-40012 Calderara Di Reno, Bologna, Italy, Tel 051 726037 www.italeri.it ● JADAR-MODEL Zielna 8/103, 00-108 Warsaw, Poland www.jadar.com.pl
[email protected] ● LITTLE CARS Uncle Jacks, Lavendon Road Olney Bucks, MK46 4HH, UK www.little-cars.co.uk Tel (+44) 01234 711980 ● LSA MODELS Retail; 151 Sackville Road, Hove, East Sussex, BN3 3HD, England. Tel/fax 01273 705420
[email protected] www.lsamodels.co.uk ● MIG PRODUCTIONS C/ Santiago Rusinol 7, Pral 2a, 08750 Molins de Rei, Barcelona, Spain www.migproductions.com In UK; Creative Models ● MODEL DESIGN CONSTRUCTION Unit 3 Hillstown Small Business Center, Mansfield Road, Bolsover, Derbyshire. S44 6LE. Tel; +(44)1246 82 77 55
[email protected] www.modeldesignconstruction.com
● PRO-ART MODELS www.proartmodels.be
● REVELL AG Revell GmbH & Co Orchard Mews/18C High St, Tring, HP23 5AH 01442 890285
[email protected] ● RZM PUBLISHING (Greenhill Books In UK) PO Box 995, Southbury, CT 06488 USA Tel; (USA) 203 264 0774 www.rzm.com ● SCHATTON BARRELS Industriestrasse 6, 94347 Ascha, Germany, Fax 09961 910 7826 www.modellbau-schatton.privat.t-online.de email;
[email protected] ● SCHIFFER BOOKS Schiffer Publishing, 4880 Lower Valley Rd, Atglen, PA, 19310 USA www.schifferbooks.com ● SCHIFFER BOOKS in UK Bushwood Books, No.6 Marksbury Avenue, Kew Gardens, Surrey TW9 4JF, UK. Tel +44(0)20 8392 8585, +44(0)20 8392 9876, email;
[email protected] ● SCHUMO KITS Axel’s-Modellbau-Shop Axel und Bernd Schulze OHG Braustraße 2a 37170 Uslar, Germany Phone: +49 (0) 5571 919 100 Fax: +49 (0) 5571 919 101 www.schumo-kits.com ● SQUADRON.COM Squadron Mail Order 1115 Crowley Drive Carrollton, TX 75006 - 1312. USA ● STUDIO 27 (Grand Prix Models in UK) www.studio27.co.jp
● SCALE MOTORSPORT No.3 Topside Lane, Newtown, Connecticut 06470-2023, USA www.scalemotorsport.com In UK; Grand Prix Models ● THE SMALL SHOP PO Box 580, Kalama WA 98625, USA Tel/fax; (360) 673-1255
[email protected] www.thesmallshop.com ● SYLMASTA Halland House, Dale’s Yard, Lewes Rd, Scaynes Hill, West Sussex, RH17 7PG Tel; +44(0)1444 415027, Fax; +44(0)1444 458606. Email;
[email protected] ● TAMIYA JAPAN Tamiya, Inc., 3-7 Ondawara Suruga-ku, Shizuoka 422-8610 Japan www.tamiya.com ● TAMIYA UK; THE HOBBY COMPANY LIMITED Garforth Place, Knowlhill, Milton Keynes, MK5 8PG, UK Tel; 01908 605686 Fax; 01908 605666
[email protected] www.hobbyco.net ● TANK MODEL, RUSSIA www.tank-model.ru www.afvmodeller.com ● TANK WORKSHOP 345 Wynbrook Drive McDonough, GA, 30253 USA Tel; (770) 573-1409, Fax; (770) 573-0479 www.tankworkshop.com ● TRUMPETER www.trumpeter-china.com Pocketbond in the UK ● TUNGSTEN DRILLS Allan Sidney No.6, Park Gardens, Holbeach, Lincolnshire, PE12 7PJ
[email protected] ● U-MODELS 1103, rue de Feucherolles 78630, Orgeval, France www.u-models.com ● VERLINDEN PRODUCTIONS (Historex in UK) 811 Lone Star Drive, O’Fallon, Missouri 63366, USA (636) 379-0077 www.verlindenonline.com ● VALLEJO (Creative Models in UK) Acrylicos Vallejo, SL Apartado 337 08800 Vilanova i la Geltrú, Barcelona, Spain Tel; (34) 93 893 60 12 Fax; (34) 93 893 11 54 www.acrylicosvallejo.com ● WORLD WAR TWO BOOKS Military History Books Ltd (Mail order address, callers by appointment) 2 Cysgod Y Bryn, Aberystwyth, Ceredigion, SY23 4LR, United Kingdom Tel; 01970 623778
[email protected] www.worldwartwobooks.com ● WIDESPREAD SOLUTIONS Unit 1 Levens Hall Park, Lund Lane, Killinghall, Harrogate, West Yorkshire HG3 2BG, UK. Tel; +44(0)1423 522836 Fax; +44(0)1423 525656
[email protected] www.graphicair.co.uk ● WHITE ENSIGN MODELS Unit 5, Cobnash Industrial Estate, Kingsland, Leominster, Herefordshire, HR6 9RW, UK. Tel: 08444150914, Fax: 08444150916
[email protected] www.WhiteEnsignModels.com
■ Please mention ‘Tamiya Model Magazine’ if you make contact with any of the companies listed above - thanks!
64 February 2015 TMMI 232
p 64-65 Contact NI 232MN.indd 64
18/12/2014 10:16
NEXT ISSUE
The next issue of TMMI is March 2015 (No.233), on sale February 19th
FORM FOLLOWS FUNCTION
Zvezda's recent 1:48 kit of the 'homely' Sukhoi Su-2
SHERMAN'S NEMESIS Tamiya's all-new 1:35 Jagdpanzer IV 'Lang', full-build
...AND MUCH MORE, OF COURSE! Due to the many factors that can influence the appearance (or nonappearance) of a model in TMMI, the items shown here are on a provisional basis. We endeavour to bring you these articles of course, but please be patient if they do not feature, as all sorts of things can happen to prevent them from appearing on time… Thank you for your understanding!
Order online now at; www.tamiyamodelmagazine.com ISSUE No.232 FEBRUARY 2015 PUBLISHED ON JANUARY 15th 2015 Editor; Marcus Nicholls Consultant Editor (USA); Stan Spooner, Editorial Assistant; Matt Benfield Publisher; Alan Harman Graphic Design; Alex Hall TMMI Website; The ADH web team Advertising Manager; Gareth Liddiatt Office Manager; Paula Gray Administration Manager; Hannah McLaurie Furniture Preservation; Lindsey Doyle Printed by; Symbian Print Intelligence, Hertfordshire, UK Distributed by; Seymour Distribution, 2 East Poultry Avenue, London, EC1A 9PT Tel; 020 7429 4000 Newstrade; Select Publisher Services, 3 East Avenue, Bournemouth, BH3 7BW Tel; 01202 586848 Email;
[email protected] Tamiya Model Magazine is published on the third Thursday of each month by ADH Publishing. Editorial enquiries;
[email protected] All other enquiries to;
[email protected] Tamiya Model Magazine, ADH Publishing, Doolittle Mill, Doolittle Lane, Totternhoe, Bedfordshire, LU6 1QX, UK. Telephone; +44 (0)1525 222573 Editorial enquiries;+44 (0)7904 635 694 Fax; +44 (0)1525 222574. Back Issues; From £4.20 Inc. P&P. Back issues from #75 onwards (excluding #79) are available from the UK address below, or online at www.tamiyamodelmagazine.com
Reproduction in part of any text, photograph, or illustration without written consent from the publisher is strictly prohibited. While due care is taken to ensure the contents of Tamiya Model Magazine is accurate, the publishers and printers can not accept responsibility for errors and omissions. Advertisements are accepted for publication in Tamiya Model Magazine only on ADH Publishing’s standard terms of acceptance of advertising, copies of which are available from the advertising department. Please write to the address below. All editorial, advertising, circulation and subscription enquiries should also be directed to the UK address below.
Subscription rates are; 1 year (12 issues); £44 UK, £56 Europe, £69 Worldwide Binders; £8.50 + P&P (UK-£2.45, Europe-£4.45, Worldwide-£6.45). All prices include postage and packing. For all orders, please call (UK) +44(0)1525 222573 or visit www.tamiyamodelmagazine.com Digital subscriptions available from www.pocketmags.com
© ADH Publishing 2015
CONTACT INFO: Tel: +44(0)1525 222 573 Fax: +44(0)1525 222 574 Editorial enquiries: +44(0)7904 635 694 Doolittle Mill, Doolittle Lane, Totternhoe, Bedfordshire, LU6 1QX, UK www.tamiyamodelmagazine.com Editorial email:
[email protected] Other enquiries:
[email protected] www.tamiyamodelmagazine.com
The paper used on this title is from sustainable forestry
✁
TO MY NEWSAGENT... Please order Tamiya Model Magazine International for me and reserve/deliver a regular copy starting with issue:-
Name: .............................................................................................................................................................................................. Address: ........................................................................................................................................................................................... ............................................................................................................................................................................................................ ............................................................................................................................................................................................................ ............................................................................................................................................................................................................ Telephone: .......................................................................................................................................................................................
TMMI 232 February 2015
p 64-65 Contact NI 232MN.indd 65
65
18/12/2014 10:17
The Editor’s Page... Preparing for D-Day
ALL ABOARD!
With quite a few new US/Allied military truck kits hitting the market in recent months and years, many opportunities for interesting settings have presented themselves; street scene dioramas, depot and maintenance scenes, ‘Red Ball Express’ and even D-Day beach dioramas. But have you considered something as dramatic as this? In this wartime shot we see a Diamond T variant being lifted onto a landing ship, prior to the commencement of ‘Operation Neptune’, the amphibious part of the D-Day landings. The vehicle has driven onto specially designed netting, cradling at least 50% of the tyres’ lower halves. Heavy cables and chains lead up to a lifting frame (out of shot) which is then connected to a crane. It must have been quite a sight, seeing such a big beast of a truck being hoisted into the air and onto the deck of the ship! The dockers in the bottom right of the photo are clearly impressed by the view too. In model form, it would take some ingenuity to bring this to life, but with some inventive design, it could be possible. I’d love to see this scene re-created in 1:35, or even 1:48! See you again on February 19th!
[email protected]
Hobbyboss’s 1:35 White 666 truck or Merit Model’s M19 Diamond T would both be suitable for a dockside loading scene.
Specialised netting and lifting gear is employed here, to take the weight of the truck.
66 February 2015 TMMI 232
p 66 EditorsPage 232MN.indd 66
23/12/2014 13:03
Find us on facebook search Plastic Kits UK
p 67 Italeri 232.indd 8
Italeri Kits are distributed in the UK by The Hobby Company Limited, Knowlhill, Milton Keynes, MK5 8PG See the full Italeri range at www.hobbyco.net Italeri models are available from all good model shops
www.hobbyco.net Find us on facebook search Tamiya UK
15/12/2014 11:25
